OTUAYAUTO Door Lock Actuator for Rear Right Passenger Side - for 2007-2011 Honda CRV CR-V OEM# 72610-SWA-A01, 72610SWAA01 937-570, 937570,DLA1006,DLA1729

Detroit Mechanic Review: I already wrote a long review & amazon took it down! It's quality, I installed three of these, both fronts and rear passenger. They work fine and come with the white clip for the outdoor handle linkage. I pryed behind them with a flathead and only broke one the first front door I did. If you have other actuators not working unplug them so they dont damage the working ones. If it's your drivers thats bad, unplug the good ones and leave it plugged in. DO NOT Unplug your drivers door actuator & try to use the car or unlock it. Alarm will go off because it cant detect the master lock actuator. Pull the negative to the battery. Plug the actuator back in, stick your key in the outside drivers door handle, put negative back on and twist the key to unlock to stop the alarm. You MUST take the linkage to the outdoor handle out first before the actuator. Just swivel the top clip and pry with a flathead and pull at the same time & it pops out. Then get your flathead behind the white clip on the other end of the linkage & pry. It pops off too. Also program auto lock/unlock out of your car by foollowing the guide opening your door and turning the key to ACC then holding down lock or unlock to program out the auto feature. When you disconnect the battery you need to do this again. Reason is it overworks these badly designed actuators. The servo motor chosen by honda is too small and is the size of a CD player motor in the 90s. So don't over work them & let them last longer.

I had the door lock axurator installed it works great.

Ordered this for my 2007 Honda CRV because the lock actuators were faulty, but failed way out of their warranty period. This part is a bit tricky to install, but doable. You’ll want to note that it *does not* come with the metal arm that connects it up to the door handle. I had to use the metal arm from my old (broken) lock/latch and basically engineer it onto this part. I have no idea why the arm isn’t included because it’s a critical part and it’s impossible to install an old arm on this new part without breaking the arm or the part. I used my dremel to cut the metal arm, then bend it back enough to slip it on, then I used JB Weld to “glue” the part I broke back together. So, I fixed it and it’s working great, but I wouldn’t think everyone is quite that handy. Something to be aware of. Otherwise, the part itself works great after two weeks.

Worked great for 2012 crv, cheaper than OEM quality seems ok.

I can get in and out of my 2012 CR-V😎 Easy to install, easy to fit. I’m happy. 😆

Left rear door lock actuator did not include metal rod that connects to door handle. I removed the connecting rod from the old actuator by breaking the plastic clip. There is no way to attach the connecting rod to the new actuator without breaking the plastic clip or by cutting the connecting rod near the slot, then bending the metal to get the rod attached to plastic clip. This worked for now, but not sure how long it will last. All the other suppliers on Amazon and Honda include the rod already attached to the actuator. Very frustrated and disappointed... Wasted too much time trying to resolve this. I would appreciate a response from OTUAYAUTO. In the mean time, I will take my business elsewhere. I would be delighted to applaud OTUAYAUTO for following up with me and making it right. For now, Buyers Beware.....

Exelente repuesto encaja como los originales lo recomiendo muy buena calidad

I used this part for my 2008 Honda CRV and it works perfectly! The only issue we ran into is this part doesn’t have the rod attachment so we needed it from the old part. I’ve had it installed for almost a week and it’s still working great!

El actuado funciona bien pero la chapa es de plástico y crea una sensación de poca seguridad, que hice una combinación de la chapa dañada y la nueva