epoxy resin kit-1 GAL

I have tried several different types of resin epoxy. This is the best epoxy ever. It is very easy to use. Make sure to have the right 1:1 ratio. It is definitely self leveling. It has little to no bubbles and the few bubbles you have are easy to remove with heat gun. Most times a heat gun is not required. Drying time varies. From my experience, if you use a heat mat or some type of heating element it will be completely cured in about 6 hours. Be sure to let completely cool before demolding. When you just let it sit and dry with no extra use of a heating element it took about 24 hours to cure completely. I have made several things using this product and it has not disappointed me yet! have been extremely satisfied with this product and refuse to use any other resin. The only thing that was noticed is the bottles are not equally full. Not that big of a deal to me! Definitely worth the purchase. You will not be disappointed!

* I wanted to respond to the review beneath mine. I can't afford to have my memorial resin pieces or any pieces ruined so I did a video. I stand by my original review. Best resin on the market! I have tried a lot of different resins and I mean a lot. I started using this with their 8-hour curing formula. That's one thing you need to know about the bigger gallon size is that it's not like the smaller 8-hour curing for jewelry. You can de-mold after 10 hours but this is a 24 hour curing formula in the bigger containers. Now bubbles, which are the bane of resin..out of all I have tried this has the least amount of bubbles. I'm from the Midwest and I'm creating all the time even in cold weather where the house gets a little chilly. Cold resin equals bubbles. Even then this resin has very few and I hold the cup firmly in my hand and the warmth of my hand keeps the bubbles down. Then I let the cup sit and that usually takes care of the rest of them. It cures quickly and clear. It does not have a bad smell like some of the others and is an easy one to one ratio pour and mix. It will be the only resin I use from now on.

I've been doing resin for close to 5 years now and after trying several brands, including a couple more expensive ones, this is my favorite by far. Its easy to work with and dries clear with none/few bubbles. I like the long work time as well. The hand pump also reduces messes, which is always a plus.

I'm a beginner when it comes to resin, and I actually like this resin a lot. Wanted to get a bigger resin kit than the one I had before and this was recommended. Before I work with it I give the bottles a warm water bath, pour it out in measured cups and mix slowly. I don't do the transfer method they say in the instructions, I just mix for a minute or two extra while scraping the sides and bottom of the cup. Takes mica powders well and glow pigment glitters. Virtually bubble free to me using the method that I use, any bubbles I get while mixing rises to the top of the mixing cup after I mix and let it rest for a bit. Will keep buying this! Low odor even though I still wear a respirator when working with resin, good quality and none of my pieces have come out soft like it used to happen at times with the resin I used before.

Alright, I've gone through an entire gallon kit of this resin and feel fully qualified to write a decent review. I've tried several different brands (okay, like 6, but still) and truth be told, this is my least favorite so far. It's not terrible, don't get me wrong, and it serves its purpose just fine, but there are some intricacies about it that make it a little bit hard to work with. Let's start with the pros: -Fairly long pot time (a least 40 minutes), so you can work slowly -no discernable smell really -crystal clear once fully cured -reasonably priced Now for the cons, or those intricacies I was talking about: -Extremely long cure time - I'm talking like 72 hours over here. It's demoldable long before that, but to get from poured to sandable, it consistently took at least 3 days. That could be due to the weather here though, so I'll give them the benefit of the doubt. -Kinda thick, not crazy thick, but it takes a while for the bubbles to release. I'm not a patient stirrer, so this is especially annoying for me. If you are, then this shouldn't be a problem for you. -For the love of god, please PLEASE use mold release. With every other brand of resin I have used, I have never needed mold release and have never used it. I cannot tell you how many of my molds have been damaged or even ruined by this resin because I failed to use mold release. Since this is the only one I've needed mold release for, that's a pretty big inconvenience for me. If you are a faithful user of mold release, this won't be a problem for you either. Overall, this is a decent resin, but I won't use it again because it's just not for me. I'm not patient enough for this stuff. I give it four stars because I know it works well if you can work around its quirks.

My favorite epoxy brand. It mixes well and dries clear.

Got the job done. Happy with results

I love, love, love this resin. The pumps are easy to use and it's so great that they come with little caps to prevent drips. The resin degasses really well in my Resiners bubble remover and the results are absolutely crystal clear and so shiny. It does take a couple of days to fully set where it won't stick to itself but demolds within hours. This is my new go-to!

نوعية سيئة لا يصبح قاسي

A new resin favorite. Good pot life time to work with different works at a time, as described it does do its job to level, doesn't bubble much compared to other branded resins, harden up pretty fast and I just placed more order for this brand. It still does have a slight smell so the respirator is a must.

Excellent thanks

The best resin I've used quick easy mixing no discolouration totally clear and no aur bubbles on finished product very impressed and a handy size

Not clear. It is very cloudy and I cannot get rid of the bubbles...so many bubbles! I ruined flowers using this resin.