QiqaMole 2 Pack Silicone License Plate Frame, Front Back License Plate Cover, License Plate Bracket Holder Rust-Proof Rattle-Proof Weather-Proof for US CA Standard Car & 2Pcs Water Coaster (Black)

I got a pair of the black ones. They fit the current MA plates perfectly. Just slightly stretch the rubber frames around the plate, and adjust it so it is as even as possible. They are made of floppy rubber, of a medium thickness. Then are not rigid, and so they rely on the plate to keep themselves in place. This is no issue at all with the rear plates, as they use four screws and are held flat against the car. It provides a nice protective layer between the sharp-edged metal plates and the new car finish. Be sure to bring them along with you when picking up a new car, so that you can put them on immediately. The front plate on my car is only held in place with the two top screws, so this item does not act as a rigid plate holder or bracket. But when the top screws are firmly in place, the plate only has a bit of wiggle movement, and the rubber still acts as a nice protector. I plan to upgrade to a rigid front bracket that properly fits the car, but this is nice in the mean time. Once installed, they not only provide protection behind the plate, they also provide a narrow, minimal frame around the plate, which looks great, and is a subtle but noticeable improvement over a bare plate. I did not use any of the included screws, but it appears that the pointed screws are the same as the standard plate screws.

Everything arrived on time and in good condition, with no defects or issues. The kit includes two types of hardware — screws and bolts. Installation was easy and everything fit well. The silicone frame works perfectly. Before, the license plate used to rattle while driving, but now there is no noise at all — everything stays tight and secure. Overall, a great product with no problems so far.

Nice product! I just bought this car recently. The dealer had used a metal license plate frame. Every time I closed the hatch it would rattle. I discovered when installing this frame then the metal one had already scratched the paint a little. (I’ll get a paint pen to rough that up to ensure it never rusts). I’m glad I got this installed before the scratches got any worse! This silicone frame completely eliminated the rattling. Very secure and lips nice. NOTE: Be sure to install it right side up. There are drain vents in the bottom of the cover. The logo is imprinted on the back of the product, so it’s very easy to tell which way is right side up (plus, you can see the little vent holes) - but you do need to be paying attention at least a little 😎

I was tired of looking at a bare license plate, as I'm the type of person to always have a frame around it. When I came across this product, the minimalist design and silicone material sold me, as my state does not like when you cover up the state name as most plates do. The install was super easy.. took less than 5min to put on, the durability is superb, and it finally stopped the annoying rattle I was hearing. Very clean design, and functions as it should. It came with plenty of hardware to use vs the current ones I had, and these bolts were actually better than what I had originally which is a plus. If you're looking for a minimal frame that shows your license plate 100% visibly, it's a must have, and also comes in different colors. Will definitely purchase again in the future!

Screws were useless for my car (they were way to small) The frame however was great it totally stopped an annoying vibration that was driving me insane! LOL!!! the cup holder inserts were a bonus to me but actually fit pretty good.the frames seem to be high quality very flexible and easy to install around the plate. I'm hoping it last a long while. But I live in a state that doesn't require a front plate so I have an extra one if needed! I would buy this again if needed.

Bought a similar silicone frame for my wife's vehicle and it was a bit of a struggle to insert her tag into the silicone frame. So, I thought I would give this one a shot for my truck. It was actually a buck or two cheaper than the first one I ordered. This frame seemed to be a bit more flexible and it was much easier to insert our South Carolina tag. If I order another in the future I would definitely pick this frame. Not flashy, just functional. That is all I needed. The included screws were too small, no big deal, I just re-used the old screws. We'll see how it holds up, but it works as stated.

I don’t write a review for everything that I buy, but when I’m legitimately impressed with something I like to point it out for anyone else looking for something similar. This is a really nice license plate frame, especially for the low price! Seems like a very high quality silicone pad that fully surrounds your plate - the edges have a slot that rolls over the edge of the plate so no sharp surfaces are exposed. It comes with new black painted metal screws - both machine threaded and also self tapping types so you have everything you need. The pad itself is a good thickness and protects your car finish while also eliminating any possible rattles - great for hatchback SUV’s. Highly recommended.

Fits my Florida plate and was easy to install , comes with hardware

El material y el acabado son muy buenos. Las placas de CDMX embonaron a la perfección. El material es suave, y evitará que la lámina de las placas rayen mi vehículo. Llegaron con casi una semana de retraso, al parecer por culpa de la aduana, pero valió la pena la espera.

Fits Ontario plates perfectly. And after 1 year is still nice and bright. That's all you need to know. Now go get some flavour on your plates.

Great fit for QC licence plates!

Exactly what I wanted, minimalist, and protects the paint finish. When you close the Rav4 rear hatch the liscence plate will rattle against the paint and will eventually scratch it up, this liscence plate cover eliminates that problem, no rattle now on closing, snug up and its perfect. It looks sleek and modern minimalist which was exactly what I was looking for. And if you are planning on blacking out your Rav4 then this is for you as well! Anyone who has a Rav4 knows that the liscence plates requires very specific bolts so the cheap screws that came with it were a non-issue. Highly recommend!

Was super easy to install, I used other screws because I didn't like the silver ones that were delivered but once I put it on it looked great. Definitely recommend if you are looking for a little more customization.