Universal OWB Holster for Most Compact/Full Size Pistols

👉 I was a little sceptical when I first ordered the Mega-Fit Paddle Holster for my Ruger Max9 because the large amount of pistols it claims to fit, but...... I was willing to give it a shot (no pun intended).👉 It came in a very timely manner, well packaged with the allen wrench included. I immediately holstered my fire arm and there was just a little "Wiggle" upon securing it. A couple of quick turns (adjustments on the 4 corners) on the allen screws and to my absolute pleasure, it fit like a custom made holster that would cost hundreds of dollars.👉 Another adjustment that can be made is the angle of the gun in the holster. That is handled by the screw on the back side of the holster. Loosen it enough so the locking teeth will separate and you can angle the position. Once positioned re-tighten that screw.👉 In all, it took less than 5 minutes to adjust the holster to my satisfaction.👉 NOTE ⚠️ When you adjust the 4 corner screws, I found the best method is to tighten each one a little at a time to get a smooth adjustment. 👉 Do not tighten one screw all the way down then go to the next screw. Tighten them equally, a little at a time. Consider it like tightening the lug nuts on a tire, a little bit at a time. 👉 The screw just to the left of the trigger lock is crucial to releasing the trigger guard to remove the weapon from the holster. Just play with that screw until it works the way you want. (Too tight, it will not release and too loose, makes it sloppy.👉 To me it is quite consealable under a loose shirt or jacket , well made, easily accessible with the trigger lock located just right for when you draw the weapon. Depending on the carryability, if you are used to wearing a firearm on your hip, then you will not have any "Breaking" In time and constantly feeling to see it is still there. Once it is secured in the holster, it will not come out until you manually release the trigger lock.👉All in all, I am extremely satisfied with my acquisition of the holster which was priced very reasonably.'Nuff Said 😎

If you unscrew the the case a little, as per the directions, the Derya DY9Z fits perfectly with plenty of room for your optic and slides out easy with the finger release. I have this mounted to a thigh holster that accepts paddles and matched up exactly. Appears to be well made and should hold up quiet nicely.

Perfect fit! Had to adjust the screws a little, but once you get it where you want it, it’s perfect. Some of the videos show the holster in pieces, but mine arrived put together and new in the box. To be clear, this is an OWB holster and I guessed on the size. I have had issues finding a solid holster for my full size Springfield Armory XD-M Elite 10mm (4.5” barrel). Because my pistol is a double-stack AND 10mm, it’s pretty thick and a good holster has been hard to find. The draw is pretty easy, but I could loosen it a bit. The trigger is protecred and covered, but to be clear, this gun/holster combo is not concealable at all.

This is a good holster, value for the money good retention fits the SR1911 45 cal well, but not so much my Hellcat Pro 9mm, even with re-adjustment. It is too bulky to be used for concealment unless you are wearing a parka, and Texas is too hot for that even in the winter time. If you want concealment I would recommend looking elsewhere.

This past fall/winter I needed a holster for a women's gun safety class. I needed something quick while I looked for one that I would use for daily use. This holster is capable of working with MANY different guns. It's easily adjustable by using the provided Alan key. Once I got it to where it needed to be, my gun felt secure. It is an outside the belt carry, and because it is universal, it's a little bulky. I think if you were to wear a hoodie or a jacket, it would conceal better. If you need something to use at the range for a training, this is more than fine for that. All in all, decent little holster for training purposes. I don't use it for my daily carry though.

Great holster, fits several of my hand guns.

Perfect rugged fit. I wore it horseback riding in Yellow Stone National Park for 6 hours straight and not only was it comfortable but it was absolutely secure and safe.

This is my second review because Amazon rejected my first one for unknown reasons. They did not specify. However my review was legit, and it stated that I received this item in pieces and missing the spring for the trigger lock. I personally have spare parts for this and was able to fix it to functional order, and it is a very good holster now for $30. However I don't like having to assemble things when I order them brand new unless they're a model or something. I'm not going to bother adding the photos for fear that that is what Amazon complained about, since I was showing my PX4 firearm in the photos. But for reference, my PX4 storm fit this holster perfectly without any adjustments at all, after I fixed it. It has smooth action on holstering and unholstering, feels rather durable, and it does feel very safe as well. The rubberized padding is comfortable and the adjustability for the cant is nice. Without any adjustments, this also held my mock Glock 19. It does need to be adjusted a little wider to fit my Springfield XDM.If it were not missing the spring and disassembled on arrival, I probably would have given this four and a half to five stars.For a little bit more detail, my satisfaction stems partially from the difficulty of finding a left side holster that has the trigger retention and is out of waistband. Difficult ask.Also... You can actually get this holster a couple of dollars cheaper on many popular airsoft websites. Don't knock it, they have a lot of accessories that would benefit actual shooters.