Stand Steady 6 Monitor Mount Desk Setup - Heavy-Duty Height Adjustable Monitor Stand, Swivel Arm with Clamp-On Base, 6 Screen VESA Mount Fits Most LCD/LED Monitors 17-32 in. (Silver, 6 Mounts)

This is a very well built VESA system. I love it. let me start by saying, I have Engineering background and it takes a lot to impress me with any product. My rules are Simple: 1- Does the product work as advertised 2- is it well built 3- is it smooth and easy to use 4- Do I have to tinker with it all the time to keep it working (which means, is it wasting my time or helping me) 5- Value, meaning did I get my money's worth This product answers all of them and works well. Room for improvements: Yes, Instruction manual is not easy to follow, I have to think hard to follow which screw to use and in what order. I think they combined too many steps in to one to make it look simple but it is not. In the, I figured it out but I had to plan the steps ahead of time. Note: DO NOT START assembly before you figure out ALL of the steps and you layout all of the parts on the floor and really make it look like a movie script. Note 2: You will end up with extra parts because they provide you with multiple solutions for VESA attachment based on your monitor type. (Nice touch) Note 3: All of the monitors on one row has to be on the same level, Same size. No mixing and matching (27 and 34 inch will not work) Note 4: I am using Dell 27 inch 4K monitors, perfect fit. Finally, they included a small leveler with the kit, Thank you , Nice touch>

Assembled yesterday. For me at least. Assembly was super easy. So far it seems stout enough. Currently I am running 3 x 32" 2k displays on the bottom. The middle is an LG ultragear the sides are AOC AOGs. The AOC displays are very heavy and I have them all the way out so you can't apply much more stress to these arms. They are not twisting or flexing "yet". Only minor issue is there is no single screen height adjustment. So if you don't have matching models you may run into alignment issues like mine has. Not sure if you can see it. Not a huge deal but may drive some people crazy. Just get matching screens and there is no issue. Also the range of motion on the side arms is minimal. Not a problem though. Take a small saw, or in my case I used my reciprocating saw with a steel blade and cut the small bump tabs off. Now I have full swing motion on the arms. But beware. Those bump stops are there to avoid extreme pressure that this setup wasn't designed for. You could run into a failure with the right conditions. But so far mine is holding up good. Overall I like it. Is clean. Strong and easy to assemble. Wish they offered a powder coated black versdion. I will end up painting mine black at some point. Good product

The only negatives I have noticed with the assembly, is the monitor arm adjustments for the side monitors do not move very far due to the nubs on the bracket preventing some movement when trying to get the angle of the monitors setup. The tilting portion of the monitor brackets has to be tightened down extremely snug in order to get the monitors to hold in position without falling down. All 5 of my 6 monitors are all the same size and do not exceed the weight capacity for each mount since they are 23.6 inch monitors and my middle screen is a 32 inch which is under the rated weight capacity as well. The build quality for the parts is very good though and the whole assembly is very strong when clamped down the desk and I am happy that it allowed me to setup my screens in the best viewing orientation like I wanted. It does take a little bit of time to get the alignment for each screen setup. I have tried several monitor mounts that work well but this one does allow for a clean and nice setup. I would recommend it for anyone with multiple monitors

tldr; it's not perfect but there's honestly not one that's better for this price. Preface: So if you're buying one of these you're probably part of that niche area within your profession. Your spouse, co-workers, friends, and family give concern as to why you need this many monitors. Anyways, because it's so niche there aren't many to choose from and my review is going to be calibrated for that. Material Quality: The quality on this is 5/5. Aluminum extrusions for the posts and beefy hinges (my VIVO ones sagged overtime). The clamps are SOLID. I like the small details they added like the transition from mount to desk and the end caps. And they also come with cable clips! Install: I've had better instructions but honestly. if you're buying one of these... you should be able to figure it out. Usage Pros: honestly the build quality is top notch. I feel comfortable placing the stupid number of monitors I think I need. Compared to other options (like VIVO) this is MUCH better. One thing I love about this mount is the height of the posts. they are tall allowing you to mount your bottom row monitors at proper ergo height. The top monitors are also able to have enough vertical wiggle room. Overall - you can tell a lot of thought went into the design and quality. its practical. Usage Cons: The ONE con about this product is the range of motion of the side monitor arms. They are limited to about 30 degrees. This means that if you want your monitors to be "flush" from side to side, the edges of the side monitors will be unreadable (since its too far). I've opted to go with the staggered approach which looks kinda ugly but it works. However, this kind of makes sense in my opinion. swinging the arms super far inwards (so that you're embraced by the warmth of your monitors because you're an loner) puts a lot of strain on the structure. I'd like to think someone smarter than me (who designed this) did this on purpose. Customer service: One of the hinges had been mis-threaded. They literally sent me a replacement arm within 12 hours.

It's the most sturdy monitor stand I have seen. It's well made and easy to put together. I did find that the vertical swivel joints were not strong enough for heavier 32" monitors. No matter how much I tighten the bolt on the joint the mounts droop and won't stay in position. The tools provided with the kit were not adequate for tightening these swivel joints. I had to use a 3/8" ratchet with an Allen key socket. I will try adding Star Washers to the joint replacing the smooth washers provided to see if that adds enough grip.