4 Channel Bluetooth Amplifier, 50W x 4 Audio Power Amp, Hi-Fi Home Stereo Speaker Receiver [Douk Audio M4]

This amp is an absolute beast! I'm using it in my 1600 sq ft shop with 4 speakers mounted in each corner, and let me tell you - it will absolutely rock the entire place out! The power this thing puts out is seriously impressive. One of my favorite features is being able to adjust each channel's volume individually. This gives me perfect control to balance all four corners of the shop and get even coverage throughout the space. The Bluetooth range is surprisingly good too - I can move around the entire shop without any dropouts, which is exactly what I need when I'm working. I've been running it with 2-ohm speakers and it handles them beautifully at around 75% volume with no distortion or heat issues. Plenty of headroom for when I really want to crank it up! There are a couple of small quirks worth mentioning. The speaker wire terminals are a bit finicky to work with - they get the job done but aren't the most elegant design. Also, the channel numbering is counterintuitive with channel 1 on the right and channel 4 on the left, rather than going left to right as you'd expect. You get used to it quickly though. Despite these minor issues, this amp is perfect for my shop setup. The power, flexibility, and wireless performance are exactly what I needed. Highly recommended for workshop or garage setups!

This is a great 4 channel amp. Have installed 2 at my son's who moved in to a house w/ 3 sets of built in stereo speakers and I added my large indoor 12" woofer, mid, tweeter to his living room. So, 8 channels driven. Not using Aux In. Selected Ch3&4 RCA's for Output and fed the second M4. Have 2 at my son in law's house. Same as son's he has 4 Stereo sets that came with the house. There I took his Flat panel TV output and fed the Aux RCA's in for Ch1&2, and selected Ch3&4 RCA's for Output and fed the second M4. Installed 1 in my garage driving indoor and outdoor Bose wall mounts. Bluetooth works great w/ good range. Big bonus for me is the USB. I took my old USB-2 thumb drives and copied genres or "playlists" to a bunch of them. This really is my favorite use. Plug in what I want and crank it up! This is a 4 channel amp, so each speaker has separate volume. Plenty of power. Works for me. Oddities: Looking at the front, the Channels volumes are Ch4, 3, 2, 1 left to right. Being an old time audio guy, Left is Ch1, Right is Ch2 for Stereo. I just wired it so Ch1/3 is my L, Ch2/4 my R. On the Aux input, just hook Source Red to White input, White to Red input. No big deal. Wishlist: USB has Next, Previous & Pause/Play buttons. Would love to see Next & Previous "album" and Shuffle. Update on USB use: It is a bit fussy on the thumb drive you use. Data Travelers work. Patriots USB-2 did not. PNY USB-2 no, USB-3 yes. I just bought a 10 pack of PNY 32GB USB-3.0's that work great. Cheap

UPDATE: Just after the warranty expired the Bluetooth capabilities failed. I contacted the vendor and while they would not replace the unit, they did provide me an essentially new unit by sending me an entirely new circuit board for $10 shipping. Swapping out the circuit board is fairly straight forward if you have done this kind of thing before. The replacement board now has a working Bluetooth connection. I have to give this vendor credit for basically replacing the unit out of warranty. I stand by my original review - it is a nice unit. ORIGINAL: I just installed this, so it's early. I have two sets of speakers in the same room that require a different volume setting in order to be properly balanced. This unit does a great job sending the same sound source to two different speakers. My sound source is a Mac using BT, so master volume is controlled on my Mac. The documentation is a little lacking - I have included a diagram of how the volume controls are mapped to stereo signals - I may have missed it, but I could not find it in the documentation. Overall I really like it so far.

Volume control per speaker so if you want L-R must connect one speaker zone to two channels. I have done as much with 2 other mono zones...using all 4 channels and 8 output terminals. The sound is as expected. I have input from tv and have played mp3's off USB. Bluetooth is up and running. The HiFi is doing all I excepted and doing with ease of installation and acceptable performance. Great bang-for-the-buck. I would buy again.

Great little amp I used it to replace a large amp. I had runs my Sonos system with four speakers. It runs cool and there is no sound distortion. Also takes up almost no space in my cabinet works perfect for my needs. The amp feels really well built too made out of some kind of metal or aluminum. Two more things I’d like to add. Bluetooth range is about 20 feet with the item inside my cabinet. Also you’ll need a tiny flathead screwdriver to secure your speaker wires into the back of the amp.

Great product, but know what you’re getting: this is not a true 4-zone stereo amp. It’s actually 4 mono channels or 2 stereo zones. As long as you understand the routing, it’s a fantastic little unit. It’s compact, sounds great, and looks pretty sweet. It’s easy to install and offers solid versatility with both Bluetooth and aux inputs, plus a second input or pass-through option. For the price, it’s a great value. It could work just as well in a multi-room home setup as it would in a vehicle, making it even more useful depending on your needs.

update 2- I switched back to my 1st amp, a 2channel fosi amp (it also using bluetooth from my lg c4 TV) and the issue I described below is gone, so it absolutely is something about the audio processing on the douk Unit. see my 2nd photo. granted I'm now only able to have two channels instead of four , and I lose the individual channel volume control, which I very much liked , but this is what I'll have to deal with for now. so bottom line I have to suggest for most people to avoid this douk amp solely due to poor audio quality. as a test, I also tried using the analog red/white composite line as an input on the douk and while that did not exhibit the same issue as the Bluetooth, the audio quality via that is REALLY poor as if there's some kind of gain boost being added by the douk. update (may2025, ~2 mo. after purchase) - The unit still works, however ive started to notice a very annoying issue- the amp seems to be cutting off some lower sounds (ie: the beginning of when someone starts speaking). For example I frequently listen to interviews on YouTube or Curiosity stream. And whenever there's a slight pause, which is normal when someones speaking, the amp seems to cut out (right when they start speaking again), so there are audio gaps. It's as if there's a built-in squelch or gateing being done/applied on this amp. Since the in wall speakers themselves were older, I actually replaced them and I'm still having the same issue. I also tried replacing the stock 24v 4a power supply, with a 24v 4.5a power supply (Essentially to just replace the power supply), and the issue still exists. I also tried disconnecting two of the speakers so that I was only driving to (as opposed to all four), same issue. I may just have to bite the bullet and go with a full , big size amplifier as i cant find a small 4 channel amp other than this one. :( original review: review of the black 4 channel amp, with 4x red physical volume knobs (and an antenna out the rear) - There aren't many 4 channel amps of this form factor /type available. In my case, the new home I bought, in the bedroom there were already four in-wall speakers with the speaker wiring to behind the TV. I have an LG C4 TV I mounted to the wall so I didn't have the space for a normal full size audio receiver. This has worked great for ~six months now, it was the only option I could find that had individual knobs for each channel, which was important in my use case. I mentioned the model TV I have as it's actually very important, the LG C3 has an analog audio headphone Jack output which is what you would normally use to go from TV to this type of amp, however LG being cheap, eliminated that on the newer C4 line, which forced me to use Bluetooth audio from the TV to this amp (if i wanted to keep volume control via the TV / TV remote, which ofcourse you want!). In this setup the only other option was to use the digital audio optical cable out from TV and then use a optical -> analog converter; I tried this, it worked, however with that you lose all volume control on the TV/remote (and with this mounted behind my TV i wouldnt be able to easily access the physical nobs to adjust volume). this is normal for digital/optical audio output, as its ment to be fed to a full size audio receiver and you control the volume on that device. So I had to go with my least favorable option, and that is to use Bluetooth audio from the LG TV to this four channel amp, I expected it to give me alot of trouble / disconnects / re-pairings based on other things I had read, however that has not been the case at all. The Bluetooth connection has been flawless from the first day I paired it to this amp. Range is not an issue here as this amp is touching the back of the TV (zip tied up behind the TV) It's been about six months now and I have not had ONE issue come up. I used the TV every night and with this setup I can still control the volume from the TV remote (or in my case my apple tv remote which itself via IR controls the TVs volume). very happy with this amp. sorry i dont have a pict of the amp in use- This was the only photo I have right now, but it is place right behind this mount, mounted to the TV itself

I've been using it for several months and the sound is great while using the RCA input. Today, I switched to Bluetooth and the sound is also great... if you're standing right next to the amp. IDK if I got an outdated version, but my amp doesn't have the antenna input shown in the pictures, and the Bluetooth range is only about 5 feet. If you plan to use it with the RCA input, it's great, and the sound is awesome for such a small amp. However, if you wish to use the Bluetooth technology, be prepared to be disappointed.

Nice, affordable alternative to an expensive setup. Great for a DIY speaker setup with BT.

使用方法は用途とは違いますが、４スピーカーそれぞれ音量調整をしたかった。 アレクサでラジオを受信し、各部屋の広さに合わせて音量をコントロールしてます。 モノラルの音源になってしまいますが

Shipping and delivery from Douk Audio very fast and painless. I'm using this to drive bass shakers on a Sim Rig. I was uncertain about the connector as this isn't (or doesn't seem to be; the feature descriptions are ambiguous) a USB sound card, but it installed easily and perfectly as a Bluetooth audio device which turns out to be much easier than yet another USB connection on the rig. The build quality is really impressive at the price and it works well and feels very robust. I was using the other well-known and popular brand cheap little USB 2x50W solution - had no problems for a year then mine failed and its replacement failed for no clear reason. This solved the problem and has given me the extra channels to add a couple more shakers when budget allows.

Works perfectly as expected, once again , great products and great service.👍

Amazing product for the price! I've been using it to connect to my living room TV via Bluetooth, and power the passive speakers I have embedded to the walls and ceilings across some rooms of my house. I'm glad I didn't have to buy those $2000 home sound systems.