VCELINK Cat7 Cat6A Tool-Free RJ45 Connector, Shielded Ethernet Plug, 2 Pack

Flawless. Sort of tricky to fit the wires in but the markings on the load tray make it simple to know which wire goes where. Connected to my computer first try with no issues and speed was as expected.

Terminated a couple of my internal ethernet cables into my switch with these and suddenly my internal home network managed to connect and hold 1gig connections which it had failed to do for years with lots of upgrades in other places. Now, network stays at 1gig rather than initially connecting and then dropping to 100meg about a day later. Amazing what a difference this made (had previously changed switches, network cards and moved internal cables a little).

Needed to use a network cable tester as not all wires always connect first time. But once I got all the wires in both ends (on 2 different floors of a building) and tested okay with the machine they’ve been fine ever since. Shame there wasn’t a way of getting more reliable first time connection.

Had to run a CAT7 cable from my gaming PC to my router on the opposite side of the house (around 25-30m. These connectors, although expensive for what they do, they are so easy to install, and a lot less fiddly than crimping connections. You also don't have to write off a connector if a wire isn't in the correct order. ;) The block has an easy to follow colour coded wiring map on it too.

Like others I could not get these connectors to 'bite' on my Cat6A cables' wires. The 'teeth' seem extremely small and weak and, I suspect could not get through the plastic and make good contact with the copper. I have returned them. It's odd because I also bought RJ45 keystones from VCELINK and they are night and day: Very strong 'bite' and perfect connection. They look visibly stronger and better quality than those connectors.

I used this on Cat 7 direct burial cable and it works really well. The cable length was nearly 50 metres.

This is a great connector which I have used to terminate a cat7a cable that I struggled to terminate using traditional crimping tools. The head is a bit bulky so may not properly fit into a mini rj45 plug which may come with a laptop, but for all standard rj45 sockets these work a treat.

These are a great idea and solidly built, but with CAT7 cable I had to try a few times to break the insulation and get a good connection. Frustrating for sure.

The Ethernet cable coming thru the concrete block wall from the Frontier Fiber Moca box was not only a Cat5, but it was also damaged & if bumped, would stop passing a signal to the router on the inside. Instead of just making the hole in the concrete wall large enough (or a new one) for a new patch cable with ends already attached (I'm in a rental), i used a Cat 7 patch cable i already had that was also twice as long as the one ran by Frontier. I cut off one of the male connectors & ran the bare end thru the current hole in the wall from the outside in to where the router is located. Using a regular coax stripper, i was able to remove the outer cover of the ethernet cable without disturbing the internal wires, removed outer foil insulation of each twisted pair, separated them & put them in their color coordinated slots, trimmed the excess wire from the terminal, inserted it the slot on the connector, closed it, screwed on the end cap, plugged one end in the "in" outlet on the router & the other in the "out" outlet on the moca box outside & crossed my fingers (dont have tester). By the time i got back inside, the router was showing it had an internet connection. Ran several speed tests from several different sources on my hard wired pc, including Frontier & they were actually a tad faster than before. Now i've got a much longer cable to better place the router, a stable, fast connection & of course going from Cat 5 to Cat 7, more bandwidth! Being my first time doing this, i was a bit nervous & it took more time to line up the individual wires but i printed out screen shots from the product video showing where each wire goes since the instructions arent really helpful & didnt have to redo a single wire! Very happy with the product & the results...

Il prodotto è ben fatto, i materiali sono buoni. Alla fine fare il collegamento non è difficile ma bisogna sapere cosa si sta facendo. Leggo di cortocircuiti in altre recensioni... beh se si tagliano i fili troppo lunghi e si lascia rame sporgente, chiaro può andare in corto perché quando il meccanismo si chiude fora a sua volta i cavi e l'eccesso da voi (erroneamente) previsto può andare a contatto con la massa metallica. Ma non è colpa del connettore, è un malinteso. Questo NON è un RJ45 "tradizionale". Io l'ho usato per un cat6a 10Gbps, dopo aver diviso le coppie ho infilato i cavi nelle giuste locazioni (se non siete sicuri, aiutatevi sul web). I fili meglio tagliarli un pò più corti piuttosto che più lunghi. Non serve che sporgano, quando il connettore si chiude i cavi vengono forati per fare contatto, quindi non serve a nulla metterli proprio a filo. Basta che il meccanismo riesca a "bloccarli" in posizione e soprattutto il rame non va spelato (non deve sporgere). La schermatura va preservata, quindi dovete piegare all'indietro eventuali strati isolanti ed incastrarli nella morsa del connettore lasciando "unite" le coppie il più possibile prima di tagliare l'isolante per dividerle e farle andare nei contatti. Se non fate ciò, perderete parte della schermatura sul connettore. Completato tutto, provate con un tester che tutti i contatti siano ok. Solo dopo collegatelo nel dispositivo finale, e avrete zero rischi. Io sono pienamente soddisfatto delle prestazioni che sta offrendo.

Para los que no somos manitas, poner una RJ45 en un cable cat7, que tiene hilos como morcillas de Burgos, es prácticamente imposible. Compre clavijas específicas para esa categoría, pero nada, se me apelotonaban los cables, no llegaban ordenados, se quedaba uno fuera... imposible. Encargué estas clavijas y... maravilloso. Viene una guía de plástico como túneles de metro, colocas los hilos sin problema (bueno, un poco de maña sí hay que darse) metes la pieza dentro, cierras, aprietas y enroscas. ¡Sin grimpadora! ¡Y me ha funcionado a la primera! Una maravilla, de verdad. No le doy cinco estrellas porque creo que son demasiado caras, pero la verdad es que me ha merecido la pena.

Surprisingly easy to install: Managed to get everything right on the first attempt. However the instruction sheet could be a little mor detailed and it is important to keep track if you have 568A or 568B and connect accordingly. I simply followed the illustrations in the Amazon webbshop, much better and detailed for a total noob. Besides that everything is excellent, quality and ease of use are extreme. Noticed instantly a difference in my internet connection (the old contact had a broken tail) - had constant problems with interruptions before I changed - now it is rock solid and significantly faster.

Conforme à mon attente, Merci