Sound Addicted Subble 1.2'' (4 Pack) Silicone Feet Isolation for Amplifiers, Decks or Any Other Audio Equipment, Non-Skid Hemisphere with Adhesive (Sustain up to 24lb) | Subble

These are exactly what I was looking for! I recently ordered a pair of Klipsch speakers for my new set up and these things are heavy! I’d say they each weigh about 35lbs easily. Oddly enough the only type of padding that come with the speakers are these tiny little rubber “feet” that are no more than a quarter inch square. It seems a bit silly to me and I was proven right when the sound dampening was non existent with these silly pads. My search first led me to these large foam pads that are of all sizes and sit underneath the speaker. Although I can see these being extremely effective at isolating vibrations from the speakers to the surface they look hideous. They are large and bulky and I couldn’t find a single product that would fit the Klipsch bottoms exactly. True, I could have ordered large and attempted to cut them down to size but I couldn’t see that resulting in a clean cut and would look awful in the end. This led me to isolating rubber feet and I ultimately settled on these because they looked extremely chunky. Turns out I was right. They are very durable and thick and chunky and they need to be as they sit under some seriously heavy speakers now. They’re not squishy but chunky; that’s the best word for them. The nice thing is they don’t look large or awkward once installed on the base of the speakers. As I took them from their packaging I started to worry that they’d be so big they’d look a little silly. When I showed them to my wife after installed she asked me what she was looking at; what was I showing her? Ha! Perfect! They blend right in! They look like they should have come with the speakers themselves! That’s exactly what I wanted and I couldn’t be more pleased with how they look. Not only do they look great they work! They truly keep vibrations isolated to the surrounding air and stop most vibrations from being transferred to the table surface they sit on. This, for me, is a huge issue as I’m restricted in my setup to having the speakers on the exact surface where my turntable sits. This is not ideal but I am very limited in my room’s set up and am forced to put them on the same surface. These feet have done a great job at isolating vibrations. I truly couldn’t be more pleased with these simple rubber feet. They seem like such an insignificant thing but they make such a difference. They look good, they work, and they’re such a cheap addition to any set up that I can’t recommend these more highly to you!

I bought these for my 3D printer because it would shake a lot with the stock feet. After I put these on, the shaking was gone. The printer runs much smoother now and the difference was noticeable right away. Very happy with them.

I had ordered these for my turntable and speakers to prevent the needle from jumping as I walked past the cabinet on my hardwood floors, as well as to prevent speaker feedback as they are on the same surface as my turntable. They work beautifully! No skipping or rumble. I had ordered 12 and one pack was missing 3 feet, I reached out to the company via their website (via their direct email, their captcha contact form wasn't working when I tried it: [email protected]) and not only did I receive a lightning fast response, they sent me not only my missing 3 feet, but an entire pack of 8! Awesome customer service and an awesome product. Worth the price. Thank you!

I would advise putting the pads where you think you want them because once you peel off the paper on the sticky side, extremely difficult to pull them off. be sure you get the height and width you want and checked the dimensions of the ones you ordered.

Soft and sturdy silicone pads. They feel like they should hold up without much issue for my stationary equipment. I'm not sure how well they will have held up in 5 years, but they're great: easy to install, sturdy, and flex when I push on my equipment. Size is maybe slightly smaller than a dime and hemi-spherical. Good height for something that doesn't have its weight distributed evenly enough. Work great to get my studio monitors off the desk and replace the thin disc feet of my bookshelf monitors. Small vibrations get absorbed well with these and don't transfer as much movement to my bookshelf from my speakers.

Good adhesion, well made, just the right height for my soundbar.

I have a couple of Klipsch RP-600Ms that I use on my computer desktop in a near field setup. They are also pointed into my kitchen so I can listen to them while I cook. I knew they were vibrating my desk when I listened to music because I could feel it in the desktop, but also there was a audible resonant peak in the upper-bass/lower-mid region that was getting on my nerves. I tried at first to mitigate the resonance using some butyl rubber sound dampening (same as what is used in cars) to the bottom of the desk, but that didn't quite do the trick. I'm listening to music right now as I write this review and I would say after installing the Subbles to the bottom of my speakers the amount of vibration I can feel in the desktop is barely noticeable. That upper-bass/lower-mid resonant peak is also gone. Needless to say I'm very pleased at how well these work. If your speakers are vibrating the surface they sit on, you should give these a shot. You may be surprised how much it improves your speakers' clarity.

I have 2 external boxes stacked on top of a Mac Mini M4 Pro, and heat build-up was causing the NVMe drives to drop out. I added these silicone feet to both of them to allow air flow between. Just clean the receiving surface with an alcohol pad, let it dry, and stick these in place. Works a treat! You don't really notice the feet; they just fade into the shadows.

Son unas cositas pequeñitas y hermosas, compré las más pequeñas para unos monitores adam t5v y hacen su trabajo, quizá no al nivel de unas almohadillas profesionales pero es esto o gastar más.

It is a fake. Don’t buy it.

Perfect for my needs matched the missing pad I had on my goldnote amplifier. The

Easy to attach to subwoofer and they reduce vibration.

Really nice quality product. It is small enough to be hidden under the speakers.