GLISTON Paintless Dent Removal Glue Sticks Hot Glue Sticks Paintless Dent Repair Tool for Car Repair Dent Remover Tool Set - 5 PCS Black & 5 PCS Yellow

The yellow glue sticks are very strong and adheres extremely well to metal. The melted glue must dry completely for 5-10 minutes before trying to pop out a dent in auto metal...but it works great. If the glue sticks to the metal...application of some heat by a hair dryer will make it flexible and easily removed. Alcohol will rub out any left over smudges. This is a really good product...but must be used carefully. The black glue sticks are not as strong in sticking to a metal surface...but works well with crafts, etc. I used two yellow sticks to pop out a large dent in the hatch of my SUV. The effort took over 8 different attempts, and about 2 hours, but almost 100% of the dent came out and has returned to the original shape. You have to be patient and work with the dent to get it all out.

Very easy to use. Worked as advertised. I used the yellow for dent repair and it held very well. Sometimes I had to work the dent repair attachment off the car panel because of how tightly it stuck. The one challenge when it sticks that well is, some gets stuck on the dent pull attachment. I used a heat gun to remelt the wax to get it off.

Great overall Value- I believe these assorted sticks were like 11.00 shipped.. First of all the BLACK GLUE works Great when the air temp was 65degrees or less and there was high ambient humidity the glue pulled decent, BUT as the midday sun warmed up the metal the BLACK "GOO" refused to fully cure.. even after 25- 35 full min they remained soft like BUBBLE GUM-- I repeated this 10- 20 times trying to get BlACK glue to cure, never really curing The YELLOW- CLEAR sticks performed MUCH BETTER on our warm summer day.. The metal temps were between 85-95 degrees and the dent pulls on this glue was much more agressive!! Perfect POPS were after 6- 9 minutes of letting the Yeller glue fully cure and the POPS were noticeably more agressive--- be patient its a LEARNIN CURVE --- PRO TIP-- use a COTTON BALL saturated w/ DENATURED ALCOHOL for dissolving the GLUE TABS--- dont waste your time on cheapo RUBBING ALCOHOL---

The glue is designed to let go. If you snap the tool and not try to pull up slowly the glue will hold long enough to pull the dent slightly each time. I learned this from a professional PDR person. It works best with a PRD dent puller.

The device is well made, but was put assembled wrong. Once I discovered this it worked. There were no directions with it so I had to go to the internet, that's how I discovered it was put together wrong. Hopefully it will work once I get better got glue. Crafter glue will not work!

This hot glue is very strong. It is not like craft store hot glue. It is designed for use to pull small dents out of automobiles. When I ordered it, I mistakenly thought it was the small diameter sticks, and was delighted to find that it is the larger sticks for a full sized glue gun. They are very much longer than ordinary sticks as well. It was a lot of glue for such a small price.

I bought the glue sticks “frequently bought together” with the automotive dent remover kit. These came and I put them with the kit. I went to use them today and they’re at least three times bigger than the glue gun hole. They’re unusable with the kit I ordered unless I buy a new glue gun. I’m not sure which ones to even order. Waste of money. The glue gun doesn’t have any indication on it if what size glue stick to order. Neither does the product description. Any help?

I tried the regular hot glue sticks I had to try pulling dents using the GLISTON Paintless Dent Puller – Golden Dent Puller Kit. Even after leaning thoroughly with alcohol the regular hot glue did not "stick" well enough to pull the dent out. Ordered these sticks and used the amber colored ones on a 60 watt glue gun. At 60 watts the glue gun made this amber glue bubble and smoke a little. However, the glue proved to be superior in "stickiness" to the regular hot glue from the big box stores. The pull buttons would not pop off when pulled by the tool. After pulling the dent I had to manually pry the button and hot glue off using a small plastic spatula (included with the kit) and regular 90% rubbing alcohol from the drug store as a release agent. This glue works great for what it's designed for - pulling dents.

These glue sticks worked awesome to pull several door and hood dents out of my HHR

Black ones are stronger

Works alright

These are too good ,they have strong hold

I know these are intended for body work but I like that they can be used for so many other projects around the house. Good value and just a reminder.........make sure you have a good quality glue and don't blame the seller if they don't work properly in your $1.99 Chinese glue gun. These are high quality pro glue sticks but can serve a lot of different uses and are worth the money spent on them.