2Sets 3.0 Plus Rounded Curved Edges Mouse Feet Skates Compatible with Logitech G Pro X Superlight Wireless Gaming Mouse feet Replacement (0.8mm, Smooth, PTFE) Pro Performance Upgrade

I have a Lightspeed G502; noticed the tape on the bottom was peeling off and affecting my mouse movements. I'm always skeptical about buying after market stuff like this, but I was very impressed. I cannot speak to the product's longevity, but they include 2x scates so that's a huge plus. Good: 1. First and foremost this works well. Actually, too well, I had to readjust my DPI because it was moving so much faster on my hard mouse pad and also my cloth pad, about 100DPI to be precise. For that reason it accomplished the goal perfectly. 2. It included a microfiber cloth and 2x pads should the first one die. If this gets a year or two on one, it’ll be great. 3. Very easy to install. And cheep. Bad: 1. It didn’t have tweezers to pull off the existing tape which some of it was very put on. This wasn’t a huge issue for me as another product I bought that same order came with a set that I used. 2. It wasn’t super-duper taped on vs the factory which was 3M heavy duty style tape not a make or break thing but I could tell this might cause it come off faster. Overall it does what you need it to do and is a lot cheaper than getting a new mouse if you already love your current one they support.

I purchased these skates because I needed to remove the factory skates on my logitech superlight pro in order to get access to the scroll wheel inside. I was having a scroll wheel issue due to accumulation of dust and cat hair. Needless to say, the issue was resolved and the new skates felt great. A few months passed and I ran into the scroll wheel issue again but I was hesitant about removing the skates because I didn't want to keep purchasing new skates and replacing the old ones every time I ran into the issue. But after putting up with the issue for a while and almost going crazy, I decided to bite the bullet and go for it as I remember noting that there were 2 replacement skates that came with the original purchase. To my surprise, the skates came off cleanly with some gentle prying and lifting. Whatever adhesive was used did not cling to the mouse and destroy the skates in the process (like the original manufacture skates did). THIS is the reason why I'm giving the skates 5 stars (I would give 6 stars if I could) as the manufacturer's adhesive goes above and beyond and turns the skates from a single use product to something that can survive removal and reapplication to the mouse, allowing someone to continue getting access to the internal hardware of the superlight pro without having to worry about wasting more money on skates every time this is needed. Highly recommended. Would buy again, but don't need to!

Bought these to replace the disappointing OEM skates on my MX Master 3S. OEM skates noisy on my hard resin mouse pad and drag on cloth pad. These went on easily and fit perfectly. Glide SO much easier and faster on the cloth mouse pad and much quieter, faster, and smoother on my resin pad, too. Don't know how long they'll hold up, but they are a great value, so I don't anticipate being disappointed.

Sorry, I didn't identify any improvement vs my old ones. But that is good also.

Great product, great value for the money. The size is perfect. They were super easy to install on my mouse. Would recommend.

One of the pads is slightly larger than the outline. Had to push it in on the corners. The rest fit perfectly with room to spare, You will need to remove both layers of the original pads, the top layer is plastic the bottom layer is a soft foam like material

Fit perfectly on my Logitech g604. Feels premium and glides really well on my cloth mouse pad! We will see how long they last but it does come with an extra set so definitely shouldn't need to buy more anytime soon

First, I'm rating this one star and will not change it because well, while the mouse skates are better than stock because they are aftermarket, rounded and, definitely .8mm: they do NOT fill out the sensor foot thing. If you're getting burrs with the mouse, first, notice that the uh, stock skate on that is flush/not rounded but maybe a little. Surprise, it's 0.7mm. ALSO I bought two sets of these (fact check me, seller). Set one arrived with the same issue: idk how these bent in the packaging. I will admit I did mess up placement on one but, uh, i left a mark with the plastic tweezers. The bottom skate is before I reattempted placement for the fourth time but noticed...the skate's edged were scuffed? Yikes. Last, honestly, if you get any burrs: try taking off the stock sensor skate and go without. These skates also do not fit flush with the fillout and while I did nail the placement once (see last image) it took four tries ouf of two purchases and still, it's off because it should be filling out the hole but it's not so lame. I honestly think these might have been a bad bad and I'm trying to help the seller know because they're the only ones on Amazon that sell them and i dont want people to lose their money. Save it. Anyway, again: honestly, these are only worth it for the the three main skates but even with those, I ended up going with glass skates because the dpi sensor one was wasnt filling the skate holder and caused more burrs than even the stock skate but i think it was just defective. Maybe the adhesive too because two arrived kinda slid off the plastic/heat idk im mad i wasted my money. LOVE A sad customer that wanted to support a japanese business

Swishhhhh. Such function! All gamimg games seeing the boost, white so bright! Sleek, precision cutting, accurate design.

Worst purchase ever, now my mouse is ruined.

I love my Logitech G700S, it's the best mouse I've used, but after almost 10 years of almost constant use and one replacement set of mouse feet later, it really needed a little bit of extra love and care. I took the mouse apart, cleaned it, replaced the left mouse button switch and then went searching for decent mouse feet. All of the feet I found available were cheap and looked it, apart from these. Other replacement feet are thin and have visible surface marks from manufacture. These are much thicker and the surface is smooth. I used a bit of TIM cleaner to remove any dirt and grease from the old, attached feet, and simply stuck these on top as a little extra height helps stop grease build up on the surface and makes it easier to wipe down. I have been using a hard mouse mat ( QPAD - ECR) for years and recently bought a Steel Series Qck cloth pad as a replacement, which I didn't get on with. I now have a Razor Sphex V3 stuck onto a glass plate. The combination of these feet and the Razor pad suit me very well whether it be causal use, but more importantly gaming. The Steel Series pad gives a good, but slightly heavier feel to movement, which isn't for me, but the mouse feet work well and offer a consistent glide on both surfaces. I hope that helps anyone trying to make a choice. There's no need for the supplier to provide two sachets of alcohol wipe, a cloth and tweezers. It's wasteful, but 2 sets of quality mouse pads for £6 a go is good value. If you are walking all day you don't cheap out on footwear so why do the same for your mouse? Delivery was within 2 days and excellent considering I ordered late a night.

Do not buy, Skates are not the correct size for superlight 2