Agri-Fab 45-0463 Pull Behind Broadcast Spreader,130 lb. Hopper Capacity Designed for Seed, Fertilizer, Salt, Ice Melt with Universal Hitch,12 ft. Spread Width for Riding Lawn Mowers and Lawn Tractors

Bought this tow behind spreader for my husband and then read the other reviews and became worried. I told him about all the complaints and that maybe we should just return it. He said that he wanted to check it out first and see for himself. He put it together and it took about 2 hours. He said the directions were clear and easy to follow but you need to read! All the parts were there and fit correctly. Solid construction, good quality and worked as expected! Very pleased and highly recommend. Easily cut his fertilizing time in half if not more.

Assembly instructions OK but make sure you do a parts count first and then follow instructions exactly- tightening nuts too soon may make it difficult to fit other pieces later. I came up short one hopper brace, probably because the shipping box was flimsy and the part just slipped out. Operates just fine, though on/off handle can be difficult to reach, and if you start the flow before putting your tractor in motion it will dump excess whatever it is you're spreading in one place, which might kill the grass. So it's a bit of a contortion act. Hopper will not empty completely if hitch position is low because material will slide toward the front of the hopper and not reach the dispensing slot. I have contacted the vendor about getting a replacement brace, we'll see how that goes. All that being said, it can put down more in an hour than a smaller spreader can do in a day. I can also use it to salt my driveway in winter, so that's double-duty for me.

I've owned this lawn spreader for over a decade now, and it has served me well despite some signs of wear and tear like cracking tires. I appreciate the plastic parts, as they withstand the corrosiveness of lime and fertilizer much better than metal. Maintaining it by washing, drying, and coating metal parts with WD40 after each use has helped prolong its lifespan. The slimed tires have been a bonus since day one. I have a beautiful landscape with varying terrains, from grassy meadows to wooded areas. While the spreader handles most areas well, some aggressive spots require adjustments in material distribution for better traction and stability. Occasionally, items getting caught can hinder the spinner's function, especially on challenging terrain. The aging unit shows signs of paint flaking, and I've had to reapply slime this year, signaling a need for refurbishment.Despite minor issues like paint wear and occasional blockages, this spreader has been a cost-effective investment at just $15 per year. I plan to enhance it with an edge guard and explore seat activation for the next unit to improve functionality. Remember not to over-tighten the plastic components to prevent cracking.

We have a 20 acre farm and about 5 acres of it needs to be receded for our small herd of cattle. Looking forward to using this. It seems to be well built. We will be attaching it to our ATV and it seems like it will be super stable. I love that it has a high storage capacity for a big bag of seed. Once assembled it's really not that heavy and easy to move around. It was a little bit complicated to put together. Just take your time, it took about 45 minutes. But once it's together it's super stable and a good value for your money. We didn't have any missing parts. And I think this is going to fit right into our need at the farm perfectly.

It seemed fine after I assembled it (which was easy to do) except the spring clip that is used as an agitator near the hopper gate looked like there is know way it would stay in place so I made a mental note to safety wire the clip to prevent it from coming out but said I will use it once then fix it. 20 minutes after using it the spring clip was missing and I had also purchased the screen (which is a flimsy ripoff that should have come with the unit) to prevent clots from jamming up the hopper gate and easier on the agitator. I spent an hour looking in my 1 acre yd and did not find it so I figured my tractor tire would some day. The gate lever locking wing nut assembly is plastic (maybe nylon) never the less it makes you fear tightening too tight as to break it and I imagine they put the stupid engineer from the agitator on this design to insure lost or broken parts and yes i have dumped my load twice even though I have tightened the wing nut to its max so I drive constantly looking back to insure it does not slip. The gate lever pops out of the dentent (closed) position when hitting a bump. I have a Kubota BX2370 tractor and the hopper hitch is to high for this size tractor thus it leaves media in the hopper because it travels tilted down when near empty. The gate lever is too far away from tractor but I manage to strain leaning back as far I as can to shut gate off& on. I am going to attach a permanent clamp probably a C-clamp on the Gate lever, I added a cotter key in place of the agitator, I am going to rigged an extension arm to the gate lever and find a long hitch pin using pipe will shim up the hopper to travel level. So far this has saved me know time vs my hand spreader and I have been using foul profanity loudly scaring my wife back into the house. This is not going to beat meat unless the gearbox fails like others then I will shoot it. The plus is I will make it work and I will end up being satisfied because most of the design is great to me but a moron (yes you product engineer and Director of Test Engineering) who ok'd this into production almost like it never went to a test lab you can visually see the defects without using it. I have the Agri Fab Lawn Sweeper it works great, the Plug Aerator works great love both of these and are ruggedly built and the Dethatcher kind of cheap but beats raking.

Molto ben fatto .. solido e capiente...

I just ordered this and used it yesterday. Assembly took about 45 min and the directions were straight forward. Like others have said don't tighten everything until its all together as it makes alignment of parts easier. I loaded it with 100lbs of granular fertilizer at once and had no issues. I kept the spread rate a little light and covered everything twice in different directions for an even spread. Like all broadcast spreaders it favours one side the way the product hits the spreader wheel. In all I covered a out 2 1/2 acres and had no problems at all. I didn't have any of the negative issues that so many other reviews list. No wheel skidding, tipping, missing parts, difficult assembly, etc. I was extremely impressed with the performance and would highly recommend this product.

I bought the spreader and it arrived on time but was missing a support arm. I contacted the seller gave them all the information needed to get me a replacement. They then went to work in getting me one sent out (some days later it arrived). The support arm arrived and as you can see by the picture they sent out a black one instead of orange. Bearing in mind they have all the information of what I bought you’d think they’d get it right. I’ve had the spreader for a couple of weeks and I can’t wait for them to send out another to replace the black one. I need the spreader in action now so I’ve bit the bullet and cracked on. I’m happy with the product and happy with the customer service. I’m just miffed at their attention to detail. Very poor. 🤬😖😤

Hallo zusammen, heute habe ich meine Wiesen eingesät bzw. nachgesät. hat wunderbar geklappt. Auch der Zusammenbau war kinderleicht. Beschreibung absolut ok.

Funciona a la perfección y esparce muy bien el producto. No es muy robusto, pero mientras no se le “sobrecargue” y se le dé el mantenimiento adecuado te servirá mucho para jardines muy grandes. Una cancha de futbol sin problemas. Buena compra.