Waterproof Case, Underwater Case, Diving Case Protective Compatible for Gopro Hero 13, 12, 11, 10, 9 Black Waterproof 164Ft

Works well very good quality and price just what. I was looking for for my next bicycle tour across America don't have to worry about ruining my gopro and still record while it rains, time the past their day it was raining and could not record. Not sure why I didn't have this right away with

Had this for 3 years now, still works great. Best investment, mounted on my motorcycle and power port allows continuous charging of my gopro9.

Cumple con su función

I used it to go diving in Hawaii.

This is a review of the Suptig Waterproof case [supposedly] compatible with GoPro HERO 9, HERO 10, and HERO 11 black. I bought this for a motorcycle, as a way of powering my GoPro HERO10 Black directly, while protecting its lens and screens from flying debris, and keeping contaminents from entering the battery compartment (which gets exposed by removing the battery door to get access to the power/charging port). SIDE NOTE: The GoPro HERO 10 is my first action camera. My initial tests at using it on the motorcycle while powered only by battery, and without any external casing, resulted in the camera shutting down after 20ish minutes due to overheating. After seeing that Texas Fly Caster, on YT, discovered that his camera didn’t overheat when directly powered, I hoped this setup would also resolve my overheating issues. Vapers, btw, are all too familiar with how crazy hot Lithium Ion batteries can get! Even so, there are other videos that indicate various settings that can lead to overheating. Ones not mentioned were: turn off WiFi and Bluetooth when not needed. Back on subject… When I connect the HERO10 (with no battery installed) to the charging port in my home that I use for charging iPhones, etc., it powers up and is perfectly usable. When I do so with either of the two cables provided by Suptig, the HERO10 powers up, but gives me a prompt saying, “NOT ENOUGH POWER: Your GoPro will power off. Connect to a 5V/2A power source or higher to use your GoPro without a battery.” It shuts down after I click (or touch) the OK button. As a second test, I tried all three cables while plugging into the USB port on my motorcycle and got the same results: the cable that came with my HERO10 powers it just fine, allowing me to use the camera as normal; the cables provided by Suptig result in the same “NOT ENOUGH POWER” message and subsequent shutdown as indicated in the previous test. This wouldn’t be a big deal if the case could be fully sealed while using the cable that came with my GoPro. I’d hate to find out what happens to a $500 camera in a heavy rain, when a dime sized hole is fully open over top of a battery compartment that had its compartment door removed. Unfortunately, the screw-on caps that seal the dime sized hole that the cables fit through, are factory installed on the cables before the cable ends are installed. They can’t be removed in order to be used on other cables. For those reasons, I’m rating this as a 1 star, “failed to deliver” for my needs, and a terrible oversight by Suptig with its inadequate cables. But how would I rate it otherwise? There are all types and grades of plastic in this world. I’ve seen everything from brittle to super rugged. I’d rate the case in the high middle of that spectrum. The clear parts are made of decently rugged, thick acrylic, and the other parts are good, solid grade consumer level plastics. It certainly wouldn’t qualify as military grade, and may not survive a drop onto pavement at 60+ mph with camera inside, but for consumer purposes, it’s a solid thumbs up. I haven’t and have no intentions of testing it underwater. I’ll yield to other reviewers to report on that and the quality of its seals. If the cables were capable of powering the GoPro Hero10 Black, I’d expect to be rating this product as a solid 4 or 5, for my purposes, after testing it through some rain storms on my motorcycle.

Seems like a decent case. But the only reason I bought it was to be able to use an outside power supply, so it’s just a water proof case until I can figure out a solution.

I have two GoPro hero 8 cameras with the Suptig external batteries mounted on a kayak and needed something to keep them protected from water being splashed over the front and sides. I like the way it's setup, it came with a cable with waterproof connectors on each end. Now the cameras and the power supplies are protected. Please note, I don't submerge these so I'm unable to verify if they are water tight. Update: These seem to be good, and I like the way they keep water off the camera, however, I think they're for underwater setups. When placed on the kayak and running, the cameras overheat and shut down after about 15 minutes.

I tested this down to 80 feet and it did not leak. Be sure to test this without your gopro inside of it first as I'm sure quality control is not paramount on a $20 case. All physical buttons can be used while the gopro is inside the case. The touchscreen cannot be used while it is inside the case. Note that you will need to get a pass-thru battery door for your gopro as well or the battery will fall out if you bump it while inside the case.

Pris pour plongée snorkeling boitier au top joint etanche sur les câbles au niveau branchement gopro et sur la batterie , gopro bien protégée au infiltrations d'eau suite à une question posée par une personne on peut effectivement soit charger la batterie dans le caisson etanche ou même en retirant la porte ou avoir la porte latérale avec trou alimenter la gopro sans batterie avec le câble adéquat .produit au top vraiment et pas chère .Je recommande ce produit une fois chargé tiens longtemps et ce décharge très très lentement même si stocker sans s'en servir vraiment nickel .

Gut als Steinschlagschutz 100% Wasserdicht Gute Video und Bildqualität Kaufempfehlung!

Great item and superfast prime delivery.

雨の日の固定撮影や 雨が降りそうな日の夜空のナイトラプス撮影などに重宝しています 何も問題なく気に入ってます

Fonctionne très bien.