Amcrest 4MP ProHD Indoor WiFi, Security IP Camera with Pan/Tilt, Two-Way Audio, Night Vision, Remote Viewing, 4-Megapixel @30FPS, Wide 90° FOV, IP4M-1041W (White)

I previously purchased another brand advertised as an indoor/outdoor camera, but had multiple issues after setup and wasn’t able to get reliable support from the manufacturer. My wife has been pushing me to get a replacement and since I’ve had positive experiences with other Amcrest products I own, I decided to give this one a shot. I was hesitant at first because the overall rating isn’t great (4* at the time of my review), but I am so glad I decided to get this one. This review will probably get a bit lengthily, so I’ll add a tldr at the end if you want to skip to it. Before I break everything down READ THIS IF YOU PLAN TO USE WIFI: You will need the included Ethernet cable and your router before you can connect to WiFi. Had I read the instructions before I started setting this camera up, I would have saved time by not installing it in the wall first, rooms away from my router. I read dozens of reviews before making this purchase, and one consistent complaint was the lack of instructions. I can’t say that I agree with most users here; I found the instructions very thorough in terms of actually turning the camera on and setting it up for the first time. I connected via WiFi, but there are detailed instructions for mobile and Ethernet as well. The back of the quick start guide also has links to alternative access methods and physical installation guides. Is absolutely every manual for each setup/installation method included in the box? No, but links to everything are provided in the Quick Start Guide and we’re all ordering this from a computer or mobile device anyway, so why not save the paper and use the links? But I digress… First off, everything came packaged nicely and was well organized. This isn’t something that will necessarily increase my rating, but would definitely count against it if I received a box with a jumbled mess. I found the physical installation itself to be very straight forward, but as mentioned, there is a link in the included guide to help with setup if needed. I ultimately installed the camera on my wall, as you can see in the picture, but there are also rubber feet on the bottom if you just want to set it on a different surface in your home. Note that this device cannot be set up level on vaulted ceilings without purchasing a separate bracket or mounting plate due to the angle of the ceiling. If you have flat ceilings, or choose to install on the wall like I did, it will install just fine with the included hardware. The included USB to micro SD cable is very long and had no problem reaching my wall outlet from the mounting position just under my ceiling, so that was also a plus. I mounted the camera before I connected it to WiFi, which was a mistake, but it was easy to unscrew from the bracket and take into my office where my router is to connect with the included Ethernet cable. The Quick Start Guide does a great job of walking you through the steps to get the camera connected, and once I had the app downloaded and entered my WiFi credentials, I was able to bring the camera back into my living room and operate it with no problems. When it comes to using the camera and app, I recommend going through the tutorial that pops up when you first log in. If you skipped it by mistake (like I did), you can access it again from the main menu. There are A LOT of features, and even after going through the tutorial and playing around with them, it’s easy to get lost or forget what function is “hidden” behind another icon menu. That said, all the functions and features seem to work exactly as they should. I did find the tracking feature a bit quirky at first, but this was my fault and not an inherent issue with the device. When I first tried tracking with the camera, it kept wanting to pan up to my ceiling fan (which was on at the time). Even when waving to the camera and walking around, it would start to follow me, then immediately go back to the fan. As soon as I turned the blades off, it tracked me perfectly. There’s also an option to set the tracking sensitivity, but the standard settings worked well once the fan was off, so I didn’t play around with them. Another thing I really like is HD mode. I attached pictures to my review of Standard Definition “SD” and High Definition “HD.” I only pictured a small section of the room the camera captured for privacy reasons, but there is still a big difference. Accessing, operating, and recoding the camera from the phone app works really well, even if the menu options themselves are a bit clunky. The privacy mode is also nice to have when it’s just my wife and I at home and we don’t want to feel like we’re being watched or recorded. I did not test desktop access because I don’t plan to use it. If there’s one negative I could give the device itself, it’s that it’s pretty big and conspicuous. I didn’t purchase this to be a hidden camera or anything, but it would be nice if it was a bit smaller, or was at least all white and didn’t have the black “Amcrest” logo printed across the front. tldr; I am very impressed with this camera, both from a function standpoint and the price point. Having mobile access and control, as well as the ability to record, were must haves for me, and this device delivers. The camera could be a bit more discreet, and navigating the app can be a bit unintuitive in some instances, but this thing is packed with features and everything works exactly as advertised. Overall, this was a great purchase for an indoor security camera.

I’ve been using this Amcrest camera for a few weeks and it has performed very well. The video quality is sharp, the motion detection works reliably, and the app is easy to navigate. Setup was straightforward and only took a few minutes. I contacted customer support for assistance, and Luke R was extremely helpful and professional. He guided me through the process and ensured everything was working as expected.

Review of the Amcrest IP4M-1041W Decent value for not a lot of money and Blue Iris support I've had the older version of these cameras for almost 3 years now and have used them in spots where mounting a regular camera would be problematic and they have worked well enough for me. This camera will be used in my kids playroom to keep an eye on them when we're not down there with them. Unfortunately, this camera is NOT able to be used with the Amcrest Smart Home app which is a shame as (although not perfect) it is much nicer to use than the Amcrest View Pro app(maybe this will change in the future?). I set this up via the Amcrest View Pro app, but am not a huge fan of the UI in the app or the quirky issues it faces. The app works, but it's far from great. Instead I use Blue Iris and for anyone who doesn't know, Blue Iris is a video camera software that supports most types of cameras. It is what I use for my home and it allows most types of cameras to be added via ONVIF. For $59.99(price at time of writing this), this is a decent little camera for security or to use as a baby/kid monitor, but honestly the ASH-21 might be a better choice for some people as it has the newer Smart Home app you can use. If you use it with a separate software like I do then the app doesn't really matter and if you can pick it up on sale then it may be a more solid option. It's still good for anyone that wants to be able to keep their video storage locally and not rely on the cloud as it has an SD card slot. However, it also offers cloud storage too so you have a choice either way. It can be wireless or wired which is nice for an easy install and portability or for someone that can plug it into their network to keep WIFI traffic reduced. Night time visibility is also pretty good, same as most other indoor cameras with night vision so no problems there. It has an auto tracking feature which is pretty cool in theory, but I think I will turn it off as it needs a little work software wise. It tends to jump around a lot to center a subject even when they're still in frame and I don't see much (if any) adjustment you can make and it doesn't self center when the motion stops. I've seen cameras like the Yi Home cameras that do this very well in comparison. I think auto-tracking is kind of gimmicky at this point anyways for lower end cameras and ends up being a nuisance instead of a good tool. It's better most of the time to get the camera far enough away to capture the entire area you need or have two angles. In the end, it is a solid camera and my other two have lasted without issue for over 3 years so I can't complain.

May not be a problem if you rely on cloud storage, but I'm not a cloud storage guy and prefer to keep any footage recorded locally on the sdcard. The camera fails to save video recordings if your ISP has an outage. This means the camera is still on, but if you internet goes down, no recordings locally to the sdcard. I have custom rules in my firewall that allow the camera out only ntp protocol to set the time. It cannot go anywhere else. Time and remotely viewing live footage over my network appliance's built in VPN capability are the only reason it has any wan connection. Support is less than helpful with illogical answer such as: "Since it's a wifi camera, it requires wifi to record, even to the sdcard." The camera also supports and ethernet connection, so using their same logic, it's an "ethernet camera" and requires an ethernet connection to work. In reality, it's an internet camera, and requires an internet connection to even do what a camera is supposed to do: record. I have other outdoor ptz cameras that record back to an NVR. They also have an sdcard option and will record to the sdcard regardless of "internet". I picked this camera up as an easy option for keeping an eye on my dog that stays inside my house while I'm at work. If something happens while I'm gone and the internet goes down, I have no recording of it, lol. Off to find a camera that, well, records.

I will update if things change as far as failing over time, only had them for a month so far. I'll quickly cover all the things I wanted know and couldn't find a difinitive answer to before I purchased. Yes these can be wired or use wifi. I have mine hard wired with ethernet cables (initial set up requires ethernet). The cameras can be viewed on either phone through their phone App or desktop via Amcrest Surveillance Pro that you download for free from their site. I have my cameras mounted on the inside top of my windows looking outside (image flipped), so they can be set to fulltime "daytime" so the IR camera never turns on and causes window glare that blinds the image. You can turn off all the indicator lights on the back so no one can notices you have cameras in your window at night. These can be difficult to set up if you don't have some basic computer knowledge. Each camera gets it's own IP address so you have use the phone app to intially set up and give it a new password and then after enter the camera via desktop/laptop internet browser using the IP address to really dig into all the features. And there are quite a bit of features to fine tune. Good news, if you go to Google AI type the model number and ask whatever question, AI will explain how to find anything within the camera you're looking for and explain. Each camera records two simultaneous vids, a hi and low res that you can switch between when veiwing. The purpose is to make it easier for your computer to show multiple cameras at the same time in low res (4-16 cameras at once etc.) and not stress the computer or your internet speed. When I have all the vids showing hi res my computer runs hot and I have to turn on all my fans. I have SD cards in each so the cameras record both hi and low to the cards at the same time as well as records seperate "motion detection" events, you can set each camera to record to other sources like a central DVR or cloud. Playback is easy once you play with it. You can set the cameras to record 24/7 7 days or specific days and times. General playback and Motion Events are seperated by color so you can quickly find and look at the "events" and not have to search through the normal feed to find the events. Sensitivity of the motion needs to be turned up to catch vehicles and clothing that are close in color to the background. Again, when you dig into all the features and you see options you aren't sure of, ask Google AI, it clearly explains every minute detail and tells u what 2 choose based on your situation (explain ur situation first i.e. they're in the widow looking outside or ur trying to catch your wife sneaking snacks at 3am, it'll tell u exactly how to catch her). These are much better than the cheap MIPC cameras, they come with brackets that allow you mount upside down at the top of the widow. Unfort. the Samsung PRO Endurance 256GB microSDXC Memory Cards I'm using cost almost twice the price of each camera (256 is the max and gives you about a week before it overwrites). Image quality is good enough for me, zoom works but really looses quality after zooming 1/2 way. I don't think the camera itself has any zoom like your phone, it just enlarges the area ur trying to zoom in on, so it pixelates quick. I purchased the white, since I didn't want the IR lights to come on (that's the black outer ring) I covered the camera lens with painters tape and spraypainted with black IR ring and the Amcrest logo with Rustoleum Prof. 3 quick coates-15 min between coates and let dry for 24 hours and now you can't see anything from outside unless you're really trying to find them.

The overwhelmingly best feature of the Amcrest 4MP ProHD Indoor WiFi Camera is the ability to set-up and use it over a LAN without 3rd party intervention. The Ethernet port and HTTP access allow the user to fully access and control the camera without depending on the Cloud, third-party services, or even Internet access (so long as HTTP access is available through a local router). Many cameras now require an external account to allow set up, maintenance, and/or access for their product; and I have been burned by that paradigm when the third-party goes out of business, no longer supports the appliance, or starts charging $$$ for its use. The 4MP ProHD checks all of the boxes for my purposes with a clear image, strong night vision that sees the entire room, motion detection with advanced features (region definition, sensitivity control, etc.), and multiple storage options (card, FTP, NAS). The camera has a depth of options that allow users to customize it for their needs, like independent Ethernet and WIFI definition (I have them each on different subnets), static IP, and user-defined port assignments for HTTP, RTSP, and HTTPS. For all of the many positives, the technology appears to have some limits of which the prospective user should be aware. First, it appears that the camera should be set to allow DHCP address assignment until after the SMTP server is set up. The camera would not initially connect to any SMTP server (I tried four, each from a different provider) when a static address was assigned. However, once the SMTP server info is entered, tested, and saved under DHCP, the IP address can be set to a static value; and email subsequently works fine. Second, it appears that the camera is only compatible with the NFS NAS protocol. (No SMB, for example.) Finally, I have not yet been able to connect with my FTP or NFS NAS servers using the camera. My servers are running on Linux (Ubuntu). I suspect that the Amcrest 4MP ProHD camera is built on an architecture that is (somehow) incompatible with the Linux permission structure (but I don't know this for sure). I can work around this limitation because the RTSP access appears to work just fine. Despite these issues, the quality, features, price, and, most especially, the ability for direct and independent control make this the best camera on the market for my purposes.

This review applies to the cheaper 1080 model as well. Pros: -Cost is in the budget range ala Foscam $50-60 -Setup was straightforward. Didn't need the directions to get going - I plugged it in to the router, looked for the DHCP address and got in through the web interface with a seasoned guess at the default password. hint: admin/admin -Supports SSL, but haven't created a cert yet. -Technically, no phone app required - but I understand it works better with it - more on this below and is my biggest requirement. -Unlike Foscam, you can select recordings created after 1/1/23 to play back through the browser UI. (after updating firmware - it was broken out of the box) -Also unlike Foscam, you can download the recordings through the UI, no FTP needed, but available. (MP4 files for the 4MP are pretty big!) -Profiles for time of day to automatically change various display options (IR, etc) CONS: Setup - couldn't configure a static IP - it has the setting, it just doesn't work - expect I'll have to jigger with the port forwarding when the lease expires. Null error attached. Session Timeout - My biggest gripe. Session timeouts are not configurable, and they expire quickly or are vulnerable to network disconnects - its inconsistent and very annoying. It can literally happen within two minutes of logging on. The attached prompt error happened after briefly viewing another browser window, when I returned there was an image on the screen, but when I click anything on the UI, I get the prompt error attached. Its a "security camera" that will freeze up and create the illusion it is connected. It requires constant attention if you really want security. Same results in Chrome, Edge, FF, or Brave; android or PC. Motion Detect - getting a lot of false positives on flying insects. (medium setting) Have the tracking feature enabled and I think I'll wear out the motors out quickly if I leave it enabled - can get a few pages worth over night. The tracking feature is a little jerky for cars, pets, and people, but not bad. Zoom. There isn't any - Foscam had a mouse wheel zoom and the ability to drag the camera's view directly on the display. Support. Lacking - Kudos to the other users on the Amcrest support forum keen to help, but the only thing you'll get from Amcrest is bots popping up in chat with current deals. So in conclusion - its just ok. Not great, but a smidge better than Foscam because at least you can view 2023 recordings using the browser. Unfortunately, the Amcrest browser interface is essentially unusable for remote security monitoring - I don't want an app! I'm not going to buy any more or, raise my rating until they fix the browser connectivity - but will take a dozen if they do. Further, I'll give them a 5 and buy another dozen if they add zoom and fix the static route and keep the price the same! hope this helps the DIY crowd. thanks for reading!

I purchased this Amcrest 1080p PTZ (digital zoom on this specific model) for my 3d Printing and Lasering room. I installed this camera inside my self-built Atomstack laser enclosure to monitor projects while in other rooms. The package arrived quickly and was packaged in safe condition to ensure no damage would occur during transit. Setting the camera up is extremely easy depending on the type of setup you perform. The app "Amcrest" is available on iOS, Android, PC or Mac. I chose to initially set mine up within the iOS app. You can set this up completely wirelessly (wifi setup), by dedicated IP (IP setup), or via POE ("power over ethernet"). Although this is not actually a POE camera, if you are using an ethernet cable but do not desire to setup the IP as a dedicated address, you can still choose this setup option for dynamic IP addresses. This is the method I chose. Setting it up within the app was as simple as scanning the tiny QR code on the back of the camera (make sure you are aware of this before mounting the camera in a difficult location), and setting a new username and password. Ensure that you change the default username and password from "admin"/"admin". If recognized on your network, the camera will appear immediately within the app. This specific Amcrest camera came with a 16gb microSD card, however I saw nothing mentioned about it when purchasing it. When you record video footage, a timelapse, or take photos, it can be stored to the microSD, a NAS on your network (or a SSD/HDD on your network), or to the Amcrest cloud. Each Amcrest camera comes with 30 days free of Amcrest cloud. I chose to not utilize this as I don't like subscription services. I like the ability to pand and tilt the camera and the Amcrest app has several options to tailor the image to my likings. Specifically I like the options to flip the image horizontally or vertically and adjust the colors. There are also options to change the image quality from SD to HD if desired (for limiting bandwidth on slower connections). I chose to set it to the highest possible settings. For this camera that is 2560x1440p @ 8192 kbps (8bit). This is a little strange (but beneficial) since this camera is listed as a "1080p" camera. Overall I think this is an excellent camera with numerous options and at a great value. I would definitely recommend this to others.