BOSCH HS1465 1-1/2 In. x 10 In. Tile Chisel SDS-Plus Bulldog Xtreme Hammer Steel Ideal for Removing Tiles, Smaller Grout Joints

Works as advertised. Kicked butt with a Hilti TE-6 hammer drill.

Combined with the bulldog hammer drill, it lifted those tiles and made my job way easier. You won’t be disappointed

It looks just like a cheapo model in got in one of those sets, but it shaved off quickset behind the tile so well, almost with precision. It doesn't look sharp, but it behaves like a blade. A similar blade i got in a set of blades would not shave off the grout behind tile, would clumsily dig in and make a mess of things. Great value, saved me time and made the repair job i was doing come out perfect.

I use these on my Makita impact drill chisel. It’s battery operated and works amazingly. And these particular bits are the best ones I have ever used. And I purchased all the different versions. I use these to chip out mortar when doing various Tuck Pointing projects.

i used these to remove all the tiles from my bathroom. The tiles were from 1940 and were set in thick bed mortar so I ended up pulverizing them to get them off the wall. This chisel make a much quicker job of it than working my hand. My only disappointment was how quickly the chisel lost its edge. I ended up buying multiples of this tool to get through the job. If you have a bench grinder I'm sure you can sharpen it again though.

We have used this to demo a bathroom and kitchen tile. It's held up super well and did quick work on tile that had an average of 90% adhesion coverage. It definitely saved us a lot of time and blisters compared to using hammer/chisel or the wrecking bar.

This is the perfect tool for zipping through 1in square tile without damaging any below the tile. Removed a tiled bathroom floor in under 20 min my first time using a rotary hammer with this tool.

I needed to replace some 1/2" x 16" x 16" travertine tiles installed on Ditra underlayment. I tried breaking them with a hammer and removing the pieces as Schulter recommended - uh, that didn't work so well. After looking on the tile forums for help, I learned that using a hammer drill with a tile chisel was the way to go. Using this method, the travertine tiles just flew off the ditra. If you have tiles to remove, this method is the gold standard.

Excelente broca La usé para quitar el piso de la cocina y vaya que te facilita el trabajo Indispensable para tu rotomartillo

Excellent chisel, easy to use, good quality. Great for removing tiles from wall. Good value for money. Highly recommended.

Buy this tile chisel and and add a whole new aspect to your relationship. This chisel rocks. I was peeling 35 year old lino with 100% adhesive coverage from a concrete floor. It was hardened and completely stuck on. I tried my Sawzall (recip saw) with a scraper attachment. It was slow going and the recip motion caused kickback that killed my shoulders. Then I tried my Dremel Multi-max (Oscillating saw) with both flex and rigid scraper blades. Easier but dead slow and I was going through $20 scraper blades like no tomorrow! This week I got this tile chisel from Amazon prime. I scraped the same area in less than an hour that had taken me at least 4 hours last weekend! The chisel blade is just the right angle for floor work, (the blade is at a slight turned up angle) and it seems to be indestructible for this type of work. It also took some mortar off and by holding it at the intended angle (about 45 degrees) it would not chip the substrate concrete (though by going a bit more vertical you certainly could go into the concrete). Buy this chisel and you'll save hours, this Bosch one is good value and looks like it will last forever. I'm already starting to think about other ways to use it (hmm, perhaps scraping paint off concrete floor)

Used this chisel with my Bosch Bulldog hammer drill to lift my ceramic tile kitchen floor. No complaints, lifted the tiles like butter

La inclinación de la pala es muy buena para quitar los azulejos, no es muy barata, está en más de 430 MX. Es hecha en Italia, todo bien por parte de Amazon en cuanto proceso de compra. Es SDS plus y le quedó perfecto a mi taladro.