Portable Hard Camera Case for DSLR Equipment, Customizable Fit, Protective Water Resistant, Medium, Black, 18"L x 14"W x 6"H

When I ride (ATV) I take a Go Pro, two Garmin Montana 600 GPSs, a Nikon AW-120 rugged camera, spare batteries for all of those and chargers. The first case I had for those was rubbish. The sides bent under minimal pressure because it was thin plastic. I did not want to repeat that with this case. I wanted a case to carry just my camera with the lens I use for general purpose, rugged and waterproof because it's going fishing with me. I am really pleased with the outcome. First, the case is MUCH nicer than I expected. It is a lot sturdier and much better made than I expected. It does have an "o" ring seal around the opening so it should be waterproof. It also has a pressure relief valve. And the pick-'n-pull foam is sturdy, not thin cheap crap. My method of putting the camera on the foam and drawing an outline with a yellow highlighter worked pretty well. As you can see from the photo without the camera I left some foam on the bottom level to add support on the underside. I left some extra space where the lens attaches to the body so I can get my hand/fingers around the lens to lift the camera out. And in the last photo you'll see I added the two spare batteries. Again, I am really pleased with the case and would highly recommend it. I think it is very good value for money. If I decide to build a bigger case to carry additional camera equipment, I will definitely get the big brother to this one.

I'm bummed because the only thing wrong with this case was that the interior dimensions turned out to be too small for my camera and lenses to fit. I've attached photos of the actual interior measurements so you don't make the same mistake. So, sadly, I have to send it back and keep shopping. Otherwise, this case is awesome--built like a tank and is an incredible value for the price (especially with Black Friday pricing). I'm confident you could drop it off a 2-story building and your gear would be fine. I just needed it to be about 2-3 inches bigger on one inside dimension.

Others have written (positively) about the general features of this case and I concur with those conclusions. But I wanted to leave this review for a specific use - holding a set of the Rokinon/Samyang Cine-AF lenses launched in 2023. This case is as close to perfect as you can get for this purpose - and at a really great price. I ordered this case the same day I ordered my new set of Rokinon Cine-AF lenses. I had been looking for a hard case that would fit the set well (not too big, but still enough padding.) The measurements on the product description indicated this would fit the bill. The lenses and the case arrived the same day and after (carefully) pulling the pick-foam from the right spots, it became clear the case was exactly what I needed. The fit is snug, but snug is safe. There's even room for a fifth lens when the 20mm comes out. The latches are tight, but I suspect they'll loosen up some over time.

Very nice product and very high quality comparable to other name brands. Will buy more when needed.

These things always get me. For some reason they always seem smaller when you actually get them in hand. I bought two of these. The medium and the smaller one. The build quality is great from what I can tell. I don’t think you’d be able to tell the difference between a named brand one vs these. These can do the job. There was pluck-able foam which made for easy installation of your tools or gear, I just wish it had been just a tad bit stiffer. But If you’re looking for something to protect your gear and not as expensive as the high dollar one. I recommend these. Plus I like that there is not 1,000 sizes.

Wow ! Heavy molded plastic, side by side with another similar case, there was no comparison. the Amazon Basics Hard case is extremely solid, well built. Def. recommend this one.

Just as expected. Every bit as good as its Pelican counterpart. The handles on this one are actually better, in my opinion than the Pelican. Foam is a little nicer too.

Update 11/30/17. Dropped the the rating to 3 stars due to the royal PIA getting a lock to fit on the case has turned out to be. The lock holes are too close to the side wall of the latch and make it very hard to get the lock body to fit. The case itself is great, but since I need to lock this quickly and easily for airline travel, it has become a hassle to use. This is a great hard sided travel case which I will be using for transporting my firearms when traveling. Its every bit as strong as a Pelican. Not sure why others have indicated it is not. I bought the small size and it easily fits a full size pistol (CZ 75) along with mags and other items depending on how you pack the case. I would have given it 5 stars, but there is one problem. The holes used to attach a padlock are very small and too close to the case locking mechanism. This makes it very difficult to easily attach and lock using padlocks. The holes really need to be moved back a bit from the case lock. It took some time to find a lock that will work, but I have found these Master Locks to fit (with some wrangling) https://www.amazon.com/Master-Lock-131Q-Weatherproof-Padlock/dp/B00004Y8D4/ref=sr_1_4?s=hardware&ie=UTF8&qid=1509714886&sr=1-4&keywords=master+locks Make sure you are using a 1/4" / 6mm diameter shank. Anything larger will not fit the holes unless you drill them out a bit. Due to the proximity of the locking holes to the case lock, locks differing in size to the Master Locks I linked too, the body of other padlocks may be too large to allow them to lock. This small but very important design detail is a big deal and keeps it from getting 5 stars. There are similar sized and priced Pelican cases (they are a bit smaller), that may not have the issue with fitting padlocks. For the price, the quality and size of this case cannot be beat. Update 11/6/17: For those of you that have a Harbor Freight nearby, you can buy almost exactly the same case with better padlock mounts for $29. If you have a HB coupon, you can get it for less. Just happened to see the HB cases over the weekend.

ペリカンを買うにはちょっと高い、それほど防雨とか気にする必要が無いのでリーズナブル、かつ堅牢なもの、と色々探してレビューなんかも参考にしてこちらを購入。他のAmazon Basicも信頼していましたが、こちらもしっかりした作りで全く問題ない商品でした。中のスポンジもたくさん入っていて切れ目も入っており色々と良心的。小と大だけみたいですが、真ん中のサイズも作って欲しいな

Het is een goede koffer, maar de maten die beschreven staan kloppen niet helemaal, de lengte en hoogte kloppen, maar de breedte komt te kort geadverteers voor 34cm, in werkelijk is dat 30 cm, die 34 is alleen met uitgestrekt handvat...

Good solid case, looks the business and I've got it to store my car battery charger, safe a houses. Comes with foam inside that you can shape how you like.

Sehr gute Qualität. Sauber verarbeitet. Gute Verschlüsse. Der Würfelschaum gefällt mir besonders gut da er schön fest und in mehreren Lagen ist. Zu den Preis top.

It's just like branded explorer & pelican, even thomann. They are from Germany and italy made. But amazon products not less then with very good price, I just today rec'd 1 case and order another 1, if I say what dose it's use for then Might be price gose high. Better if amazon develop metal mechanical locks along with present plastolic buckles, while there is lock holes which you can use as lock seals wire it's remove only by cutting. Anyway, good product. Thanks a lot.