BLACKHAWK! 419002BBR Omnivore MultiFit Stream Light TLR 1/2 Light Bearing Holster, Right, Black, One Size

Ok, so this holster does exactly what i wanted in every facet of the game. Thumb drive release works great though there is not much of an audible click when the light locks in. I have not had the issue with the pistol getting stuck as some have have, but it looks like that issue might stem from the mounting thumb screw on the light, just make sure the two raised nips are horizontal in relation to the muzzle of the pistol and it shouldnt be an issue. Keep in mind, this holster is HUGE, its a tactical holster and will be fairly difficult to concealed carry with, i didnt buy it for that so its not an issue for me, but its just something to keep in mind. When using the blackhawk SERPA Quick Disconnect system the holster mounts comfortably and solidly to all serpa platforms including the thigh holster which everyone seems to be having an issue with. I have all of my serpa holsters set up with the QD mounts so it was a no brainer for me. I have tried this with every full size and compact pistol i have with a rail. it fit ALMOST everything perfectly. Basically as long as the tlr-1 or 2 light fit the pistol, it will fit in the holster. YES THIS HOLSTER WILL FIT A STEYR M9-A1 there is plenty of room. I know the holsters for the steyr pistols are hard to come by so i figured that deserved special mention. Mine is the M variant but it should work fine with the L9-A1 (or the other calibers .40 and .357sig) other pistols i have tested with it m&p 45 sig 226r sig 1911 traditional tac ops hk p30 beretta px4 springfield xd 45 tactical Polymer 80 glock build (polymer 80 frame and slide) TLR 1 would not fit (therefore the holster will not work with) hk45c Magnum Research MR9 eagle (walther p99 licensed clone) Springfield XD 45 mod 2 sub compact (not a surprise as its a sub compact, but i figured id mention it) I do not have any of those Recover tactical rail grips they make for the 1911 and beretta 92, but the way the holster is designed I dont see why they wouldnt work, but if someone does have one, they will probably mention it in a review. I'm very happy with this holster and because of its versatility ill probably never need another one, BUT if i did, i wouldnt hesitate to buy one

Great little holster to have for off duty, deer lease and other adventures

This holster works much better for a 1911 than it does for other styles of pistols. It's just the nature of the design but the majority of pistols will sit too high in the holster leaving the trigger exposed, but with the 1911 it sits further in the holster protecting the firearm/trigger better. It takes some practice drawing and reholstering to get the motions down, but once learned it holds the firearms relatively secure. I would not recommend this for duty use at all, I have seen some posters state they have used this on duty but I see that as irresponsible. The level of retention offered and the overall security of the holster (1 piece of plastic against the light itself to provide retention) doesn't lend itself as safe to a potential gun grab attempt, or even rolling on the ground in a combative arrest might cause enough twisting pressure on the gun to snap the plastic off that's gripping the light. You can see in my attached photos the way my 1911 fits (Sig 5" emporer scorpion), and refer to other posters photos to compare the depth that the pistol rides in the holster. I originally purchased this for a walther ppx that I own as a simple light bearing holster to use for night shoot practice, and it serves that purpose well. I normally use a safariland 6280 sls with sentry device for my 1911 w/surefire x300u for serious business, but I would use this one for it if I was in a pinch. It's overall versatility is worth the price, and it seems to be rugged and well made. Just understand this is NOT a duty holster, but a great open carry/camping holster.

A little bulky but fits multiple firearms. I wouldn't consider it duty-grade but for range use it will be fine.

If you own multiple pistols and want a single, reliable level-2 retention holster, the Blackhawk Omnivore is an affordable and reliable choice. FITMENT WARNING: Please note that while the listing title mentions the Surefire X300, this specific model is actually for the Streamlight TLR-1 / TLR-1 HL. It locks onto the Streamlight rail attachment perfectly. If you are buying this thinking it fits the X300, it will not lock correctly. Internal Hot Spot: Be aware that there is one specific hot spot inside the holster that can rub against certain handgun frames. Over time, this point contact may cause minor finish wear on your pistol.

Aside from the fact this is a bulky and thick piece of kit, it does exactly what it is supposed to do. I tired a variety of different full size weapons all having TLR-1's attached, and they all fit exactly as they should. The only two noteworthy items are as follows: 1 - the trigger can be accessed (while covered) due to the gap/space between the trigger guard and the holster itself. 2 - the retention lever is not protected and uncovered, and thus, easily accessible. This creates the probability of a hostile take-away, especially if someone is not properly trained in weapons retention and are not maintaining appropriate situational awareness. Since this is not a concealment holster, and due to the two points above, I would say this is most suitable for training and range use. If you have a variety of mid or full size from different manufacturers that all have a TLR-1/2 attached, this is a pretty great holster for range or training use. 3.5 Stars since it's not well suited for duty/defensive applications, due to trigger exposure and the retention release not being protected.

I’ll try to keep this short. This is a really decent multi-gun holster for what you’re paying. This attaches to your weapon light NOT YOUR GUN. Some people won’t like this, but remember- your weapon light is literally bolted to your sidearm, so you have no argument about it “not being secure” because of this. The security is going to come in the locking system. This is where I say quality is decent, could be better with better design. The lock catch (that secured to the LIGHT) is a small polymer piece that is decently secure. The firearm isn’t going anywhere, however I worry about prolonged use. It may hold up well over time, not sure. Keep in mind, this holster is rather large, but it’s still built well. The one thing I don’t care for is the rubber thats all over the outside of the holster. It grabs everything, especially in a vehicle. Blackhawk needs to do away with that design. Overall, I think this is a fantastic level II retention holder. However...for duty use i’m semi skeptical. That would be up to the individual to decide for him or herself to use as a duty holster. I think it could be done, me personally I’m not sure. Off duty, casual, range, or any other carry (besides concealed) 100% perfect. Very genius holster. I have used this mode (TLR-1 & 2) with all handguns I own. Sig Sauer P229, Sig Sauer 1911 Scorpion (carry model and full sized) Gen5 Glock 17. This also fits 2011 handgun’s like the Staccato P. Definitely recommend overall.

I wish I would have taken pictures. Nevertheless, the holster is not safe to carry a loaded sidearm, at least the two that I bought this for. I have a few different handguns and I purchased this holster specifically to carry my Canik SFX and my Sig P320 both with the Streamlight TRL1-HL. First, I really liked almost everything about this holster. It is big if you are wanting to conceal, then again this is not a holster designed for that either. The holster has an open bottom to let dirt, debris, and mud fall through with ease. The draw and reholstering of the sidearm really wasn't that bad. There is a retention screw and it took some adjusting to get it just right for my liking. This honestly was a pain to adjust because the retention is on the backside of the holster and I like to practice after the whole rig is setup. So I had to take it off to adjust and put it back together. It took time. The draw and reholstering from the hip and on my drop-leg setup was actually really natural and smooth after a little practice. The deal-breaker for me was the safety concern. Not sure if I am saying this right but, just because a holster "fits" a specific model of a handgun does not mean that the model should be used in this holster. I could reach into the finger guard and pull the trigger on both the Canik and the Sig with ease, and my fingers aren't exactly that small. It's already a super bad day if someone gets close enough to grab your sidearm and worse yet if the trigger can get pulled while it's in your holster. Or worse yet, if you have children, that already like to put their fingers where they don't belong, this holster is dangerous!

Produkt z wyraźnymi śladami użytkowania. Opakowanie uprzednio otwarte, poklejone taśmą. Woreczki z akcesoriami porozrywane- nie mam jeszcze pewności, czy kabura jest kompletna. Oczekiwałem nowej kabury- dostałem używaną. Słabo, więcej u sprzedawcy nie kupię.

Works great with my airsoft MP-443 Grach with a real TLR-1 HL

使い始めたばかりのため耐久性は不明ですが、使い勝手はとても良いです

Holster très polyvalent, juste une précision qu il faut modifier la vis de serrage de la lampe TRL1 ou 2 des anciens model, pour ma part un petit coup de lime a suffit

This holster is for light bearing pistols it comes with all the right attachments for the holster to work with stream light 1/2 the mysterious missing attachment people are bumping their gums about is for the blackwhalk none light bearing holster