CERAKOTE® Ceramic Headlight Restoration Kit – Guaranteed To Last As Long As You Own Your Vehicle – Brings Headlights back to Like New Condition - 3 Easy Steps - No Power Tools Required

What a great kit, absolutely astonishing results from just 3 steps. The finish from just a wipe and 2 stages of wet and dry is unbelievable to be quite honest. That final wipe on product to clear the lens off works miracles. I think I maybe spent too much time perfecting the sanding process, because the final wipe is so forgiving. The instructions were very clear, and provides a link to a video too. There is more than enough product in the kit, and from seeing other reviews online, the shine should be around for a long time. Don't bother with other kits, this is the best overall, easiest to use, quickest and looks to give a top quality finish.

Absolutely amazing product! I'm new to cars having just passed in May and my first car is a 2009 mazda 2 sport. Its had 2 previous owners and its wearing its age.... not exactly gracefully shall we say. The headlights were awful yellow, dull, old and badly in need of either restoration or replacing. I seen this kit and though for the price it was worth a try, if it works then its cheaper than new lights, if not then I know I need either new ones or professional restoration on them. The fact this is easy 3 steps really drew me in as new driver and generally I'm not great at DIY anything (even dying my hair is a challenge sometimes). Still watched the video on youtube before and during just to make sure I was doing it right. Easy was absolute understatement! The results are fantastic! The yellow is gone, they look brand new! Now just to make the rest of car look new.... might take more than 3 steps though haha!

Great product. I used this on a 2010 Toyota Yaris headlights. The left side headlight had yellowed from sun exposure, as a result of being ungaraged for 16 years. The right side looked ok. I followed the instructions carefully for the left side headlight and found it took less than 30 minutes to prep and apply. The end result was that the light looked almost as clear as new. However it was so good that it made the right side look old by comparison, and so I then treated the other side too! This does also mean both headlights now have UV protection and should have future aging delayed on both sides. The quantity of chemical on the wipes is ample for two headlights, I also had sufficient excess to apply to the Plexiglas screen of my motorcycle. The box contained a QR code for a YouTube tutorial video that is essential to watch. The process isn’t difficult but it identifies where water must be used and where the lights must be meticulously dry. This has made a great improvement to the aesthetics of the car and is cheap and easy.

Everything you need is supplied in the box. Make sure you watch the instructional video as it provides the best techniques for removing the grime and then applying the Ceramic coating. I was amazed as I saw the change in the colour of the headlamps as I started the process. The product really is very good and if you follow the instructions it really isn’t difficult or time consuming. I reckon I had both headlamps done in no more than 45 mins. The headlamps on my 2012 Corsa were really quite discoloured but now look like new units. No scratches, no clouding, just clean and bright. Amazing. I would absolutely recommend this product to anyone - don’t bother paying for a professional as the results from this product are every bit as good and at a fraction of the cost.

I looked at several similar products before deciding on the CERAKOTE® Ceramic Headlight Restoration Kit, and I genuinely think it’s one of the best options for DIY users with little or no experience. The kit is incredibly easy to use. I simply followed the video instructions step by step, and the results were far better than I expected. The first photo was taken after completing the first stage, so unfortunately I don’t have one showing just how bad my headlights were beforehand. They were extremely cloudy and badly yellowed. The second photo shows the finished result, and the difference is remarkable. I honestly thought my only option was to replace the headlight, which would have cost me hundreds of pounds. Instead, this kit restored it to a condition I never thought possible. Excellent product, great value for money, and one I would highly recommend.

This kit has produced incredible results with my heavily oxidised headlight covers. The instructions are very easy to follow and there's a very good video you can watch by scanning a QR code. The process is straightforward and I really was taken aback at how good my headlights looked. There is also a guarantee for as long as you keep the car. You can't go wrong with this !

Initial impressions are great Instructions are easy to follow and the kit almost everything you need to complete the job, but I'm not sure how long the results will last and what I'll be left with in a few months time. My headlights were very badly damaged by the sun, all yellow and lots of water staining and fog. You start with wiping the lights down with a chemical covered anti oxiden wipe. You get 8 of them in the pack, 4 for each light. You are warned to remove the chemicals from any bodywork as soon as you can... this is where the kit would benefit from including a roll of masking take or something to protect the area around the light. I ended up using my own tape to cover the surrounding area before starting. The wipes do a fantastic job on their own. But to get the best results, you need to carry out the other steps. Step 2 is to sand the lights with the provided wet and dry sand paper and sanding block. 2000 and 3000 grit discs are included. You get 2 x 2000 and 2 x 3000, one of each for each light. This takes time to do right and not damage the lights. This is the hardest part. Take your time and don't apply too much pressure. After multiple passes you will get a good result. Once sanding is done, you will be left with headlight that look quite foggy from the micro scratches after sanding... and you might be worried about what you've just done! Steps 3 solves that. Apply the last wipe, you get two of them, one for each light. Once this wipe of chemical has been applied the lights will look immaculate. My only concern is how long until this chemical washes off/needs a top up? You only get two wipes in the pack. Say it lasts six months, how can I top it up? They look great for now but we will see how well it holds up over time. I have attached a before so you can see the results. This was half way though the process with one light finished and other untouched. You can see how well it's come out. Wholly recommended, but buy some masking tape to mask up and save your paint work from scratches and chemical contamination. And be prepared to need to find something to refinish them again in a few months when the finishing coat weathers off.

I'm afraid with the current level of AI I am very cynical about super products and their hyperbolic claims. However on this occasion I was wrong. A product that does what it says and extremely well. Used on my wife's car with very yellowed headlamps which would have been a definite MOT fail. Used as directed and amazing results. Definitely watch the YouTube video (qr on pack) for really useful (and essential) tips. Very easy to use and quick. 1/2 hour not including drying time. Excellent product and very good value

Nice and good

I used this headlight restoration kit and the results were exactly as mentioned in the product description. My car’s headlights were yellow and dull, but after following the steps in the kit, they became clear and bright again. The process was simple, and all the required materials were included. The final finish looks almost like new, and the light output has improved a lot. Definitely worth the money and highly recommended for anyone wanting to restore their headlights without replacing them.

Se si esegue il lavoro in modo corretto il risultato è straordinario, basta osservare con estrema attenzione il video e replicare tal quale e I fari tornano come nuovi. Vedremo nel corso del tempo quanto durano.

commentaire à chaud, je viens de l'utiliser (sur un HONDA CR-V III) ! L'utilisation est simple et se fait en 4 étapes : - un premier produit sur lingette, pour ma part j'ai utilisé la totalité des lingettes du kit même si mes phares n'étaient pas dans un état catastrophique (mais suffisant pour être recalé au CT) - un premier ponçage manuel à l'eau - un second ponçage manuel à l'eau - le second produit sur lingette pour le coating de suite après le traitement force est de constater que ça a très bien fonctionné. J'étais un peu craintif après le ponçage (même si la vidéo pédagogique se veut rassurante) et avant la dernière étape pour laquelle j'ai bien attendu pour que le séchage soit parfait, le produit n'étant pas compatible avec l'eau. Très joli résultat donc, en espérant que ça tienne dans le temps mais pour ce prix je ne peux que recommander ! (malheureusement je n'ai pas pensé à faire des photos avant/après)

Works.