Single-Stick 2 oz | Pool & Spa Repair | Easy for Anyone to DIY | Works Underwater or Above | Fix Cracks Leaks in Concrete, Fiberglass & Other Surfaces | by Atlas Minerals

Easy to use and works underwater

I had a leak along the seam between the skimmer housing and the pool stucco. I mixed the product and applied it to the seam with a little bit of water as the skimmer housing was lower than the stucco so it was applied wet. It dried in thirty minutes and I tested with the leak detector and found a tiny leak in the corner and applied some more compound. Tested again thirty minutes later and no more leak. Worked perfectly.

Worked great to cover a bad stain on bottom. Now I have a white patch but it’s better than a dark k stain

Easy to use, perfect temporary leak fix around my pool light cord.

I’ve used pool putty twice in our fill pond, that holds water for our pool filtration system. The fill pond is concrete with a latex undercoat. If it gets a nick from brushing, vacuuming, etc., the latex can be exposed and deteriorate. So, effective patch coverage is essential for any nicks or cracks in the cement top coat. This product works wonders in coverage and holding up to the system’s daily wear and tear. My first underwater application was perfect. Set up, covered nicely and has weathered as expected. Second try was a flop…too little mixing time and too thin patches…they flaked and did not set up. I removed them and started over. This time I used smaller 1” -1 1/2 “ amounts, mixed until quite warm and pliable (2 - 3 minutes), and made even 1/8” thick patches. Voila! Perfect patches that were set up in 20-30 minutes. I’m keeping a spare tube handy, just in case I have more unexpected nicks. This product is a game changer. Prior to this we needed to drain the fill pond and make repairs over the course of several days. Costly and time consuming. Thank you pool putty!