12 Pieces Brake Switch Stopper, Car Brake Light Switch Stopper Brake Switch Pad Automotive Clutch Pedal Stopper 90541-06036

I like that thanks to Google and YouTube videos found out this little thing “brake switch bumper pad” exists and was most likely the reason the brake/tail lights wouldn’t shut off on my 2009 Hyundai Santa Fe. Brake/tail lights would stay on even when vehicle was off.. had to disconnect battery to get brake/tail lights to turn off. First check ..gently shake the emergency brake and that it’s not stuck or partially engaged. Of course I wasn’t that lucky to find it was the cause and solution of why the brake/tail lights wouldn’t shut off even when car was not running. I’m a 50ish young female .. found out via Google then YouTube videos what the likely culprit was and how to replace it. Saw what this thing was supposed to look like and it was mentioned it would likely be found in pieces on the floor of the car below the brake pedal or in that area (scattered around in a million pieces) I went to check the floorboard .. lucky me had just shaken out the sand from floor-mat ..but I found every single tiny bit of this disc like thing (the one on my vehicle happened to be clear making it slightly more difficult to locate),but I did find every single tiny piece. A plastic washer like thing.. maybe once was rubber like material,but what I found were hard tiny plastic pieces. Never knew this “brake switch bumper pad” existed and had never heard the term before. It’s not something you know is on your vehicle until it’s not .. or disintegrates causing you notice that one of the very noticeable features of your vehicle isn’t working properly. .. I am a 5’2” 100lb female. I want to get things done quickly and cheap,but done right. Also not the type (if I have time) not to try figuring out how to do something myself. Curious why I bothered picking up each tiny crumb of this thing? These parts are not readily available in the local auto parts stores at least not for my 2009 Hyundai Santa Fe.. and/or not where I live. and that’s why I spent the time searching for the little tiny crumbs. Ordered this particular one from Amazon.. most likely because it was stated to fit my vehicle and shipped fastest. In the meantime I found my magnifying glass that I really wasn’t sure I owned,but thought I might have .. and got out the tweezers .. fit the tiny crumbles back together like a puzzle and used fast drying superglue. .. once dried I watched the YouTube video again.. used some real colorful language .. can’t see that particular spot (not in my vehicle anyway) don’t know how big guys/mechanics .. well,they most likely remove the dash or drivers side seat .. neither was something I was the least bit interested in doing. But.. Once I did the research into what might be causing brake/tail lights to stay on even when vehicle was turned off It was actually easy to do yourself and to be honest the part that I found and glued back together has been in place for months at this point and functions just fine. I most likely won’t replace it with this purchase until it crumbles and falls out again .. and you could probably use any number of things to replace it temporarily. I considered one of those rubber furniture leg pads .. the non skid or non scratch things.. I think that would have worked temporarily while waiting on the proper replacement piece or glue it together like I did (that was an extremely frustrating process,but needed the use of my car and certainly didn’t want to put others in danger with non properly functioning brake/tail lights If I had taken the vehicle to the dealership or any mechanic I’m guessing it would have cost me significantly more than what it cost me in my time googling and watching YouTube videos and the price of this part. Even though I didn’t end up using the part .. I’m keeping it as it might be needed later. Do yourself a favor and buy one or twenty .. (they seem to only be sold everywhere in multiples of 10) but the price is nothing compared to the dealership or mechanic.

I bought this for my 2007 Hyundai accent I needed it to put behind the clutch because the old one was all smashed out and broken it was kind of hard to put in at first but I had a little bit of grease and it slipped right in it's like a glove for the price you can't beat it

My factory piece broke in my 2016 Hyundai Elantra so when my car was off, the brake lights were still on. I ended up buying these hoping they’d fit and it actually did. I replaced the piece maybe a year ago and it’s still holding strong, so a bag of 12 was a little unnecessary.

Worked with some shimming, insert portion could be larger diameter. Reasonable price.

Confirmed that this product fit my 2012 Hyundai Sonata GLS. My car was having issues accelerating and kicked a brake switch error code. After some research, I determined that it was most likely the brake switch pad so I purchased this product. I believe the amount of pads you receive is a bit overkill but I understand the reasoning behind the bulk packaging. The product appears solid and is working as intended to resolve my brake switch error code. There are a lot of tutorials on YouTube should anyone want to watch them for installation. The install took around 5 minutes and the only tools I needed were a flashlight and a pair of pliers. Overall, this product is great and will save you quite a bit of money should you want to install it yourself.

Product image states these are made of rubber, product text of plastic. Most importantly, the clip post is too narrow for a 1998 Pathfinder, which Amazon assured was a perfect fit. I unfortunately don't have time to wait for an exchange, so I've had make the best of the situation. Easy to install, if they fit properly. Very fast shipper. And they seem to be of decent quality. Time will tell.

If your brake lights stay on and the cruise control does not work, there is a 99% chance that this plastic stopper is the culprit. When this plastic piece breaks, you'll notice the remnants on the carpet by your feet. The only problem is that you have to be on your back looking where the break switch meets the pedal. Push down on the pedal and insert the stopper in the the hole. If the switch is too close to the hole, even with the pedal pushed down, you may have to unplug the switch, loosen the top nut and unscrew the switch in order to give you more room. It takes about 15 minutes (if you are limber, lol). Oh, my vehicle is a 2003 Miata.

Plus, amazon now requires me to return it by driving to a UPS store, which I may not do, meaning that I'll just have to throw them away rather than taking an hour out of my day and paying for gas. THESE WILL NOT FIT AN ACCORD although the amazon "comparability tool" said it would fit my 2001 accord. The flange is much too small, it doesn't "pop in" but rather just sits there ready to fall out and make your brake lights stay on. This is what comes of trusting amazon. Don't buy this item! And really, don't trust Amazon.

lo compre para mustang 2016 y no funciono, por eso 1 estrella, solo fue dinero ala basura