HappiJac Qwik-Load Turnbuckles for Truck Camper Tie Down

These camper tie downs look strong and well built. The chrome and/or stainless steel should last for years. The threaded section inside the bottom of each cylinder is perhaps an inch long--not just a nut welded into it. A dab of lube such as silicone spray may extend their life. Turn the cylinders enough so that the handles will pull the latch snugly all the way down, but not so far that you end up bending the handles! I recommend not screwing the handles in place but rather to leave one or two in your door pocket, and the rest in your tool box. When used, you may find that the handle should be flipped for full release of the tie down. This will probably vary with the camper and truck system. I added a piece of heavy chain with a hook at the bottom for each forward tie down. For the rear, on my rig, I found the threaded section of the Happijac too long. I simply cut a few inches off so that it threaded several inches into the cylinder. Be sure to file the cut end all around. It works better to have one of the lock nuts on it before cutting. This will then chase the thread clean. Each time you load you may need to make a few turns on the cylinders to firm them up before latching the handles down. Tie the little pin rings to the latch with something like a long piece of quality twist tie so they don't get lost. They must be installed for safety while traveling. If you have trouble pushing the pins home, just iinsert a handle and jiggle the latch a bit. Enjoy. These tie downs will greatly ease your loading and unloading. Remember to unplug your electrical cord. Ha!

These things are awesome. Yes, they are expensive, but they save so much time taking your camper on and off your truck its worth it. My only regret is that I waited so long fiddling with the old school turnbuckles which are fine if you rarely ever take your camper off your truck. I looked at other manufacturers and there are some super expensive units made for Googlers or bitcoin billionaires. For that average Joe like me these are decent quality and leave you with enough money left for a case of you favorite beer!

Easy to attach and adjust!

Work great. Just got back from a 8300 mile road trip and no problem. And I have a heavy camper.

Their welds are weak and barely enough to hold. As you can see from the pictures, there really wasn't much weld holding the pieces together. They offered me a 25% discount on a new one?!?! It looks like they do not want their products to last very long, and then they do not intend to stand behind them. This product is made by Lippert.

Handel was missing

freezing rain, heavy Donner snow, massive wind, sea salt 3 months on & all excellent, what a savings over TL!! Thank you Happyjac! Cranked down hard no problem no break, crank down soft some slack no problem, cotter pins stainless as well & these jacks can be adjusted fully open without any issues! For some crazy reason I was positioned just so & needed to really run the long screw jack fully & it held! 400 miles with mountain driving b 4 I tighten it up at gas. I'm think'n I have put these though more of a test than maybe most in a short period of time & the savings of $$'s damn I'm am so happy ..jac!

Great product! May need extension chain for front units depending on whether you have HappiJac tie downs or Torklifts but solid product

Great service

Worked great installing prior to trip from Alberta to Yukon. Ensured camper remained very stable and secure - needed especially along the Dempster Highway

Pour remplacer les chaines sur mon cp

Il vont très bien juste mentionner que les tendeurs avant on plus court j’ai du laisser un bout de chaîne

Surprisingly not very happy with the quality. Two of the body sections had to have the threads tapped, as the rods would not thread in more than an inch. Also one of the handles that had to be assembled required that I had to drill out as the handle was to short. Fairly disappointed.