Desert Online General Trading LLC
Dubai, United Arab Emirates
Desert Online General Trading LLC
Dubai, United Arab Emirates
Use this Carter AccuRight Miter Mill to effortlessly and safely cross-cut and square your logs to any size with your band saw. This sled system is used to end-cut raw wood logs so they can be processed via the band saw into any desired thickness for turning or any other project. Simply place your log into the Miter Mill and position the log for the desired width you desire. Its just that easy to cross-cut your logs using the AccuRight Miter Mill. The log is held in place by heavy gauge steel tooth v-jaws and the front is adjustable to handle logs up to 9 in diameter. The contoured handle grips tightly for greater control. Steel miter guide bar adjusts to fit standard 3/4 x 3/8 miter slots.
| Brand | Carter |
| Color | Blue |
| Blade Material | Heavy gauge steel |
| Surface Recommendation | Wood |
| Power Source | Manual |
| Special Feature | Heavy gauge steel tooth v-jaws, adjustable front to handle logs up to 9 inches in diameter, steel miter guide bar for standard 3/4 inch x 3/8 inch miter slots |
| Included Components | Heavy gauge steel tooth v-jaws, Steel miter guide bar |
| Warranty Type | Limited Warranty |
| Blade Length | 9 Inches |
| Blade Shape | Rectangular |
| Handle Material | heavy gauge steel |
| UPC | 688937511532 |
| Manufacturer | Carter Products Co. Inc. |
| Part Number | AC-MISC-MM1000 |
| Item Weight | 6.85 pounds |
| Product Dimensions | 16.8 x 8.7 x 6.6 inches |
| Item model number | 163442 |
| Item Package Quantity | 1 |
| Special Features | Heavy gauge steel tooth v-jaws, adjustable front to handle logs up to 9 inches in diameter, steel miter guide bar for standard 3/4 inch x 3/8 inch miter slots |
| Batteries Included? | No |
| Batteries Required? | No |
R**P
Miter
Works great
C**N
Excellent Accessory for our Lathe
Excellent tool for our bandsaw. Helps maintain the straight cut and easily holds the log so that we are safe.
E**R
Good product. Mostly.
It works well with my Laguna 14” bandsaw. I think it is a bit overpriced but I didn’t feel like making my own. Adjusting to different diameter is a bit problematic because the log covers the adjustment knobs meaning you have to remove the log to make the adjustment.
T**S
perfect
perfectly holds a log for cutting. adjustable, well made
S**9
Excellent Jig for Squaring log ends / making log slices
The miter mill by Carter is an excellent tool for a full band saw. The intended use is to square the ends of a log or to make slices from a cut log. Setup of the tool was mostly complete out of the box. I attached the middle set of teeth and adjusted the mill for the size of the log I used. The tool is easy to adjust and fit in the miter groove of my Laguna band saw with ease. One of the pictures (I believe an Elm log) shows the ~1" slices I made. I purchased the AccuRight Log Mill at the same time, however I haven't use that yet. If the quality is the same as this jig, I'm sure I'll be equally pleased. I did watch a few YouTube videos on how people use this jig as it was being shipped to my home. The videos definitely helped. I would recommend this purchase for anyone who has a band saw, wood shop, etc.
R**E
I expected a little better quality right out the box
I was pretty excited for this product, it has some weight behind it and the teeth are sharp, however right out of the box I noticed the MDF board and the laminate were cracked, so I was disappointed about it since it came inside another Amazon box and there was padding so I know it was not due to shipping. I do not mind the paint marks but the cracking is definitely something that I wish it had been caught during quality control.
J**N
Great product /
makes it a lot safer to cut small loges
G**Y
Much better than described
The description is not good enough. It says it will do up to 9" round. I have a ride on 14" 10-326 with a 13" throat opening and this jig will take everything your bandsaw can handle. Because you have to account for height of the jig I was able to cut from 3"-12.5" rounds. Also the wood does not have to fit flat on the jig as long as the teeth are clamped onto the log. I put the adjustment screws toward the front holes so I can slide the teeth beyond the length of the jig. I have no reason to believe it wouldn't cut 15" rounds. I make hundreds of rounds a year and now I can cut with perfection. Set the fence at the proper thickness and away you go. Now I wish I had a bigger band saw.
Trustpilot
1 month ago
3 days ago
