110mm Diameter Sds + Tungsten Carbide Tipped (Tct) Core Drill

Did the job. Looks like it's got one more job in it. Plenty for my needs. Doesn't like ceramic tiles, obviously. Cut 'em with a grinder first. Not exactly a diamond core, but it would be churlish to complain at just under £12. (And if you've not cored before - check your SDS has a clutch. Seriously. I've only used real core drills before and the SDS's safety clutch was clicking a lot. It's nice not to break a wrist.)

Quality tool bit,

This is a cracking thing for when you’re trying to put holes through the wall for a waste pipe. Would definitely recommend it strong the right size compatible with most drills speed good and it’s easy to use and fit would recommend

Had no trouble drilling through brick

First of all, this core drill will bore through holes. It doesn't get too hot (it won't burn you if you hold just away from the tip) and it will cut the brick, but it's not the fastest. *** But make sure you are using a powerful drill, if not you will not cut through brickwork or you will burn out the drill itself. *** By far the biggest issue with this core drill is the bolt holding the drill bit in place. The weight of this puts the drill off-balance as it moves around and as such takes considerable additional effort to stop the drill from spinning away. I've dropped the rating down to a 3 because of this. Otherwise, this is a good drill core for the money.

I bought this to core drill bit to cut drainage holes through a 100mm concrete block wall. I couldn't find out anywhere what depth of hole it would cut but I took a chance anyway at this price. As it happened it would cut successfully to a depth of 50mm to 75mm (the bit is probably about 80mm depth). By cutting, then using an SDS point chisel to clear the hole, and cut and chisel again I successfully cut 6 holes through the wall in probably just over an hour. The bit was cutting as well on the 6th hole as it was on the first and still has plenty of life left in it. I honestly thought that at this price it would maybe cut one or two holes before getting blunt but I was delighted with it's performance and certainly it's price.

I got some problems with my core bit but saller is resolved my problem and sand me new corebit it works fine for one or two jobs but what you pay what you got i save good money for my self I recommend you

Maybe not the best quality, but did the job well enough through a concrete block wall. Cheaper than hiring the core drill, but needs a fairly powerful SDS+ tool to drive it. (Make sure the bolt holding the centre drill bit is tight!)

ein Loch bohren hat wunderbar funktioniert, ein Stern Abzug, da der Hinterteil (Stellschraube) eher aus weichem Material besteht. nicht zu fest anziehen.

Prodotto arrivato in tempo, si presenta bene, ma è presto per dare un parere.

Lo compré para hacer dos agujeros de salida de humos, se portó como una campeona de precios mayores. Cabe decir que no tuvo que atravesar hormigón. Quedó como si no hubiese trabajado. Buen peso y a un precio, en comparación, irrisorio.

Ai dû « marquer » le cercle avec la cloche. Ensuite forer avec mèche de 6 puis de 8 dans le cercle. Employer burin sur marteau perforateur pour enlever la brique dans le cercle. Enfin, « égaliser » l'orifice avec la cloche pour un beau résultat. Ne pas essayer avec la cloche seule. Ça n’avance pas.

😀👍