Dremel 220 Workstation 2-in-1 Multi Purpose Drill Press and Tool Holder

I’ve recently invested more into my Dremel setup, and this Dremel 220 workstation has been a great addition. It’s one of those accessories you don’t realise how useful it is until you start using it. Build quality is very good. It looks smart, feels high quality, and once assembled it’s solid and stable on the bench. Setup was straightforward and didn’t take long, with adjustments that are easy to understand and use. In terms of accuracy, it performs well as long as expectations are realistic. There is a small amount of play, but this isn’t a £300+ drill press, and for what it is, the tolerances are perfectly acceptable. For small drilling jobs and detailed work, I’ve had no issues at all, and it’s far more precise and repeatable than working freehand. It adds a lot of control to a Dremel, especially for delicate tasks where consistency matters more than brute force. Switching between drill press-style use and a rotary tool holder is quick and practical. Overall, a very handy and well-made piece of kit. As long as you don’t expect industrial-level precision, it delivers accurate, controlled results and feels like a quality accessory rather than a gimmick.

I have to admit that my wife bought me this for my Christmas present, but I thought it wise to make sure everything was in the box and working fine before the big day arrived. I’m relieved to say that all parts were in perfect condition, assembly was straight forward, and the unit performed excellently. I did a few trial runs (using my Dremel 3000) by drilling through some pieces of wood and steel and cutting through some 2mm brass plate - with no issues at all. I was impressed with the overall build quality of the station, it remained firmly in place, and allowed me to smoothly and accurately drill holes. My only criticism is in regard to the included assembly/operation instruction booklet - it’s not very good! This is why I would advise purchasers to jump onto YouTube and check out the two excellent videos produced by Russell Platten. By following his tutorials I was able to assemble the workstation quickly and without any fuss, and get the most out of its useful features. Anyway, the bottom line is that if you want to extend the uses of your Dremel, then this workstation will enable you to do that. Oh, and if you haven’t already done so, do yourself a favour and fit a keyless multi chuck to your rotary tool - you can purchase one for just a few quid and it makes the task of changing out those accessory bits so much easier.

The instructions for assembly were poor. Glad there were videos out there to help. Seems ok otherwise.

This workstation is essentially a drill press stand for your Dremel rotary tool, except with a couple of added features. It comes in the box in a few pieces which you need to assemble. If you own a Dremel rotary tool and actually use it, you must be a fairly practical, hands on person and therefore should have no trouble assembling the workstation. It takes less than ten minutes. Once assembled, you just remove the collar from the rotary tool and insert it into the mount on the workstation, then screw the large plastic nut around the end of the rotary tool by hand, before tightening it with the supplied spanner (no need to over tighten). Simples. The power cable can be clipped securely at the top of the workstation. The arm to lower the rotary tool is very smooth and well controlled. Some users have reported that there is a little play in the device, resulting in poor accuracy. I can confirm that there is a small amount of play, but it doesn't cause a problem unless maybe you were drilling PCBs and needed very, very precise control over positioning. However, if you need such precise control, then you ought to punch the PCB before you drill, which will prevent the bit from wandering on the board. You may wonder if you should have to do that if you are buying this workstation. This is a sub £40 workstation and does not pretend to be a £150 rotary tool press. If you need such precision, then you need to be realistic and pay for the privilege. There are such devices available, but at no where near the price of the Dremel workstation. Now that's cleared up, I can tell you that I am very impressed with this workstation. It's compact and light. It is balanced enough to stand upright in operation without falling. However, you can easily mount it to your workbench using the bolt holes - M6 bolts will work fine (length obviously depending on what you are mounting it to). One feature of this workstation that makes it different to a drill press is the ability to reposition the angle of the rotary tool - in fact, the whole mount rotates, up to 90 degrees, in 15 degree increments This allows you to drill at an angle or even sideways. It also allows you to use the rotary tool as a very mini bench grinder or polisher. This can be useful for using a polishing wheel to buff small items. At the top of the workstation is a very handy storage device - you can store plenty of accessories to swap out during your work. There is a clip to hold the cable in place, out of harm's way and even a home for the included spanner. In the photo you may notice a thin metal arm that hangs off the top. This is to hand your rotary tool from when you are using the flexible attachment (if you have one). This Dremel workstation is a fantastic product. It does what it says it does very well. I would definitely recommend it to anyone with a Dremel rotary tool.

He love it its worth it thank you

Very good ajustments /settings.,solidly built. The amount of different positions you can use, gives this device many uses.

Better than i expected! Good and solid for the amatuer structer.

Dremal pillar drill I required to drill 0.03mm and was very impressed it was easy to set up and accurate I will find it very useful it has the option to rotate the drill to a horizontal position which is helpful for fitting small drill into the chuck which is very helpful

The Dremel WorkStation is a versatile and reliable tool accessory. It provides a stable and convenient work platform for Dremel rotary tools, making intricate tasks like drilling and sanding much easier. It's a must-have addition for anyone using Dremel tools, adding precision and control to your projects. Fast delivery and easy assembly. Fast delivery, good quality, and easy assembly.

Well made workstation. It would be better if a simple base clamp system be provided as well.

Gerne! Hier ist eine ausführliche Produktrezension aus Sicht einer Käuferin, die viel mit Weichholz bastelt – in Textform: --- Ich habe mir den **Dremel 220 Bohr- und Werkzeugständer** gekauft, weil ich beim Basteln mit Weichholz oft präzise Bohrungen vornehmen muss – sei es für kleine Figuren, Deko-Schilder oder Holzverbindungen. Nach mehreren Projekten mit wackeligen Handbohrversuchen wollte ich endlich eine stabile und exakte Lösung – und dieser Ständer hat meine Erwartungen absolut erfüllt. Zuerst zum Aufbau: Die Montage ging einfach und war in etwa 10 Minuten erledigt. Alles wirkte gut verarbeitet und stabil – typisch Dremel eben. Der Ständer ist schwer genug, um sicher zu stehen, aber nicht zu schwer, um ihn bei Bedarf zu verstauen oder auf einen anderen Arbeitstisch zu setzen. Besonders begeistert bin ich von der **exakten Bohrführung**: Endlich kann ich senkrecht oder im gewünschten Winkel bohren, ohne dass der Bohrer verrutscht oder schief in das Holz zieht. Das ist für filigrane Bastelarbeiten mit Weichholz wirklich Gold wert. Die **15-Grad-Schritte** zur Winkeleinstellung funktionieren zuverlässig und lassen sich gut arretieren. Auch schräge Bohrungen – z. B. für Steckverbindungen – gelingen damit problemlos. Die Kombination mit meinem Dremel-Multifunktionswerkzeug klappt einwandfrei. Das Einspannen ist schnell gemacht, und der **integrierte Teleskop-Werkzeughalter** sorgt dafür, dass auch das Netzkabel ordentlich geführt wird und nichts im Weg ist. Ich habe zusätzlich kleine Holzstücke mit Schraubzwingen fixiert, um noch exakter zu arbeiten – funktioniert super. Ein schöner Bonus: Unten am Sockel gibt es sogar eine kleine Ablage für Bohrer oder Zubehörteile. Praktisch, wenn man mitten in der Arbeit ist und nicht immer nach Kleinteilen suchen will. Natürlich ersetzt der Ständer keine große Standbohrmaschine, aber für mich als Hobbybastlerin ist er die ideale Lösung – **platzsparend, präzise und leicht zu bedienen**. Vor allem beim Basteln mit Sperrholz, Fichte oder Kiefer spart er mir viel Zeit und Nerven. Fazit: Der **Dremel 220 Bohrständer** ist für alle, die feine Arbeiten mit Holz machen und Wert auf Genauigkeit legen, eine absolut lohnenswerte Investition. Gerade in Kombination mit einem Dremel-Werkzeug ist er vielseitig einsetzbar, zuverlässig und qualitativ hochwertig. Ich würde ihn jederzeit wieder kaufen und empfehle ihn allen Bastlerinnen, die mit Freude und Präzision arbeiten wollen.

Fait Le Job

Ottimo