Rapid 15ml x 2 Tubes Epoxy | Fast Setting, Solvent-Free Adhesive, Suitable For Most Materials, Such as Ceramic, Plastic, Metal, Glue for Bonding & Repairs

Not a lot to say about this, it does exactly what it's supposed to. Instructions are clear, product is very good. I used it to bond a thread insert back into a piece of hardwood garden furniture so the bolt stopped pulling it out, and it did the job very well. The product says you have five minutes to work it and then it sets in two hours, but if you aren't in a rush to join things back together then leave it 24 hours to let it get to full strength before putting any strain on it. As with all chemical products it does have a shelf life, don't stock up and expect it to perform in five years time. You should aim to use an open tube within a year or so if it's important to get the full strength of the bond.

his is my go to glue for strong bonds. It is great quality and good value for money, in my opinion. I always have some in the house. I have had an identical packet for well over 10 years and it has recently been too difficult to twist off the lids. Time for a new batch. All you have to do is to mix equal parts of the two mediums on a piece of card or paper and I agitate with a cocktail stick for 30 seconds, to mix thoroughly. You then should use the mixture within 5 minutes. You apply thinly to both surfaces and place together in the correct position. The joint should be hard enough in two hours to sand if you need to. This is a versatile glue - sticking so many types of surfaces - 'Metal, Wood, Masonry, Ceramics, Glass, Dry Concrete, Chipboard, Leather, Cardboard, Fabric, Rubber, Plastics'. I haven't had trouble with the glue leaking over the years, only the stuck on tops, however that might have been me accidentally swapping the tops over, thus gluing them in place.

I continue to be impressed with this epoxy resin. It, largely, just does what it is advertised to do and does so very rapidly. You really need to do your prep work before mixing these two tubes, the hardener and the epoxy. You have VERY limited time to do any once mixed. As you apply it you can soon tell that it is congealing and soon it will be unusable. So mix a little at a time and ensure you are fully ready, with clamps or holding bands (elastics etc) to be used as soon as it is applied. The smell, when the two parts of this product are mixed, is not great. But, it is doable with ventilation. I place one strip of the hardener on one side of a scrap card, and then squeeze out, not rouching, and equal part of hardener next to it. Mix both, I use a cocktail stick, and then apply. Be careful it does not get onto your hands, it is most difficult to remove from skin and clothing, I often wear disposable gloves. Why drop a point..? You need to be careful where you apply this resin. It is absolutely fine if both surfaces have no flexibility at all. BUT, it does not work well if there is a slight flexibility expected, like for shoes. It will crack along the flexible joint. Also, if possible, slightly roughening or scoring the parts to be glued helps with he bonding. That works best if the surfaces are shiny / glossy. Remember, use it very quickly or it will begin to set as you apply it. This glue has also been used to repair the shelving in both our fridge and freezer. The epoxy has not discoloured or cracked away in those places after months of use. Overall, I am very happy. Great price, it does last as long as you are careful not to mix up the lids. It is only the concern of the lack of flexibility AND not to use it for products where the glue comes into contact with food tha tyou need to be aware of. Hope this has helped you. Recommended.

Great product. As good as I remember

Sets hard. My dad used to use this stuff to mend everything

Rapid Epoxy Glue, where have you been all my life? This tiny 15ml miracle might be labeled as glue, but it’s really a relationship counselor, furniture therapist, and wizard in a tube. Backstory: My wife warned me not to jump onto our wobbly IKEA coffee table to demonstrate my “interpretive dance” skills. Spoiler alert: the table shattered into what could only be described as a pile of designer firewood, and so did my chances of peace that evening. Enter: Araldite. Pros: • Strong enough to bind my dignity back together. I glued that coffee table with Araldite, and now it’s holding on tighter than I did when I begged for forgiveness. • Works on EVERYTHING. I was feeling ambitious, so I also fixed a chair, a vase, my reading glasses, and my favorite mug. They’re now indestructible. (The table, on the other hand, could probably support a small car.) • Quick drying. By the time my wife walked back into the room, the table was back in one piece, and so was my sense of security. Cons: • Smells like I imagine a chemistry lab does right before an explosion scene in the movies. I opened a window and kept going, but wow, it’s got “character.” • I got a bit too enthusiastic and now my fingers are fused together. But on the bright side, I don’t have to wave goodbye to the delivery guy anymore. I just raise my permanent thumbs-up. Unexpected Benefits: • Superpowers? Not saying Araldite made me into a superhero, but I did repair a wobbly garden bench, and it’s holding up like it’s made of vibranium. • Therapy Tool: Every time I see that coffee table, I’m reminded that sometimes broken things can be fixed… with industrial-strength glue and a bit of humility. Final Verdict: This stuff is a game-changer. Whether you’re trying to fix furniture or your reputation, Araldite has got your back (and your coffee table). Just keep some nail polish remover handy if you’re a “creative” gluer like me.

Excellent in every respect.

Araldite Rapid Epoxy is my go-to for repairs that need serious strength and a quick set. The 15ml twin tubes are easy to mix, and the bond is solid within minutes. Ideal for DIY, car fixes, or household jobs. It works on metal, plastic, ceramic, and more, and once cured, it’s rock solid. Great for those “need it done now” moments without compromising on durability. Dries quickly too! Highly recommended if you want a dependable adhesive that lives up to its name.

Bien reçu mon article. Tout est OK.

Buona , ma attenzione a cosa incollate , qualche problema con alcune plastiche , prima adesione veramente rapida 5 min.

Mycket bra !

Better than JB weld imo. The long set time is perfect for tricky parts, but sets like iron.

ممتازة والتصاقها رائع وسريع