Transparent puzzle adhesive

I’ve used it on 2000 pieces puzzle (98cmx75cm) and 1000 pieces. It lasted for 3 layers on the big one and two on the smaller one. It worked brilliantly. The puzzles are up and hanging in frames. Very easy application. Made the puzzle colours more vivid and gave a bit of shine to the finish. After reading some other reviews I would have some advice on the application process. Press the bottle nozzle firmly to the puzzle and squeeze the bottle so a lot of glue pours out. Spread gently the glue. Make sure there’s a big puddle of it before spreading it. Don’t press hard with the sponge as it might cause the paint to rub off the puzzle pieces. Also if you have low quality puzzle, it might affect the final result.

Good glue but could have been more stronger, as some of the pieces came apart, the amount you get it good but glue needs to be stronger and thicker.

Good product, did what it says

Pleased with how this works even on a wooden puzzle. It’s important to do a good number of layers

Works very well. I gave two coatings front and rear, it held the 1000 jigsaw together very well and you can’t tell it is applied to look at. Enough left for another 3-4 1000 jigsaws as well

The glue is rather watery but comes out of the sponge applicator easily enough. The directions state it should be applied to the right side of the jigsaw and it's advisable to put a plastic or greaseproof backing behind the jigsaw first as some glue inevitably seeps through. It any of the backing touches the glue on the front of the picture it will stick fast. The glue takes an hour or so to dry but even after 3 applications over a day, some pieces were still not securely stuck (and this after I added a 4th coat over the back as well for good measure). I ended up putting sticky backed plastic film on the back of the jigsaw to secure it, as I wanted to hang the picture on a wall without putting it in a frame. There was plenty of glue in the bottle for 4 applications of a 1,000 piece jigsaw, with some to spare. I made sure to apply it evenly and it dried totally clear and was invisible.

Apply as per instructions, easy to use, I have applied 2 layers of glue to a 1000 ps puzzle and believe I could do another x2/3, sturdy hold- so great amount/size- enjoyable to apply,

Very easy to use and works

Ottimo prodotto che incolla e protegge i puzzle. Molto facile l utilizzo!!

Does well, the applicator is good and easy to use but find that puzzle needs more than one coat to completely stick together.

Ich habe die letzten Wochen 8-9 Puzzle gemacht. Von 1.000 bis 3.000 pcs- Gerade mache ich viel Disney von TREFL, Ravensburger und vor allem Thomas Kinkade von Schmidt. Der glue and go ist super, funktioniert super leicht und klebt einfach genial. Gerade die Schmidt Puzzle von Thomas Kinkade bekommen so einen schönen Glanz. Man merkt dass der glue and go aber für Ravensburger Puzzle ausgelegt ist. Da funktioniert er am besten, Schmidtpuzzle auch super. Aber bei TREFL, da merkt man die Qualitätsunterschiede der Puzzle. TREFL zieht extrem viel Kleber und Feuchtigkeit, dadurch muss man a) viel benutzen damit es die Fugen füllt und vorsichtig sein, man muss 3-4 mal drüber gehen bis es wirklich fest sitzt, und kann nicht zu viel auf einmal nutzen da sich sonst der Druck vom Puzzleteil löst. Das problem hat man bei Ravensburger und schmidt Puzzle absolut gar nicht.

This product works. How do I know? 1. Puzzle is assembled 2. Puzzle conserver glue is liberally applied 3. Glue dries 4. The kid’s cat takes a nap on puzzle 5. Something startles the cat 6. Cat freaks out and bolts 7. Puzzle flies off the table 8. Puzzle hits the wall 9. Puzzle lands on floor in a balled up heap It held. Seriously. Not a single piece separated. We just picked it up, flattened it out, and that was that. So yeah…this stuff is great. Cats? Not so much.

Buena adhesivo para puzzles