ULANZI LS26 Low Profile Mic Arm, Aluminum 360° Rotatable Foldable Microphone Low Arm Desk Mount for Podcast/Streaming/Gaming/Radio Studio w Mic Clip 1/4" 3/8" 5/8" Screw for Most Mics

I own a red O.C. White ultra low profile boom arm for my YouTube channel's main desk just like the one Joe Rogan uses on his show, but those cost 350 bucks. I needed another one for my computer desk to sit my Shure MV7 and I wasn't going to spend another 350. So, I did some research and found this gem for less than 1/10th of the cost. And I gotta say that I am really happy. I considered the one made by ElGato, but the reviews for this VIJIM LS26 were so good and it is half the price. I am glad I did. It really met my expectations and it is super sturdy, really well made, all metal and the nob under the mic which is at the end of the arm, is perfectly placed and prevents your mic from spinning around like other arms do. Give it a shot, I highly recommend you this amazing low profile arm for your desk.

Well built mic arm. It's low profile fits to swing underneath my Samsung super ultrawide monitor. The screw it comes with is great and allows the mic to swivel freely 360 degrees. No room for cable routing but some zip ties or better velcro straps fix that. Liked so much I bought a second one for my Mac as well.

The mic arm itself is overall pretty good ! Very sturdy, easy to set up, and easy to use. Cable management on it is pretty straight-forward as well. If it had better cable management options for hiding the wire to the microphone better, that would be a major improvement. Another flaw I have noticed (partly customer error on my part) is how small the product is. I neglected to realize the measurements. It is not tiny by any means, but it is on the smaller side of mic arms as a whole. Overall, if you are looking for a low profile mic arm that doesn’t break the bank, if you have limited space, and you aren’t too worried about 110% perfect cable management, this mic arm is for you.

So it seems like a great arm. Very robust construction. Unfortunately it just doesn't have much length. Configured as a straight line it barely comes out from under my monitor. Leaves me no room to adjust it. Should have read the info more closely and shouldn't have trusted the photos.

Was looking for a low profile mic arm for a Sudotack ST-800 usb mic that didn’t cost a ton. This option has a solid build. Various connector options ensures you can use pretty much any mic without being relegated to just the mic holder attached that comes with the arm. My use case is simple zoom meetings are nothing more. This arm does a great job of letting me use my mic and I can articulate the arm away when not in use. Overall a great option IMHO

Works great for gaming. Easy to move out of the way. Easy to setup. Comes with velcro strap for mic cord.

Many of the microphone arms on Amazon are in the $80 to $100 price range, but I took a chance on the ULANZi, and I am very happy I did. It makes for an extremely solid arm to mount my mic and, when not in use, folds neatly and unobtrusively below my monitors. I like a visually tidy workspace and did not want to get a taller arm that came over the top or from the side of my laptop and monitors, but I was worried the mic might be too low however, after I added a UTEBIT mini-ball head to mount a FIFINE K688 and provide infinite angle adjustment. The height is perfect. When extended and the mic is angled correctly, it is just below the camera line when I am in video conferences, and the microphone's proximity provides ideal volume without clipping or problems with plosives. Very glad I went this route. UTEBIT mini-ball head https://www.amazon.com/gp/product/B07KF7TTZ1/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

I did not want a giant boom arm coming from the back of the desk towering over my whole computer set up. I do stream but I also do other work at the same desk with two computers, one off to the side. I can swing it over to the right side and do zoom calls on the work computer or back over to the middle for streaming with my main camera and computer. All adjustments are easy and smooth without loosening any thumb screws including twisting the mic on the mount. Very high quality unit. I mounted this on the front edge of my desk and can pull it up to my face even if I am slouching in my chair a bit farther away from my screen. Only thing is, it can block access to the keyboard a little but I can get my hands under it to type so I can usually find a comfortable position to use the mouse and keyboard.

me gustó mucho el brazo. pero debes tener en cuenta que es pequeño es para un escritorio pequeño que lo quieras colocar cerca de ti es un brazo pequeño. pero en mi caso me encanto va con mi setup y los materiales super firmes se ve que son de buena calidad

The arm is very small, it’s even too small to be useable for me. It’s also non-adjustable height wise, anybody who wants to use this and has a keyboard and mouse: you will not be able to use this arm, it blocks where your arms would be. It is pretty sturdy, though.

I was looking for a relatively inexpensive (got it for around $40 CAD) mic arm that I wouldn't have to replace in a year's time, and this one gives me confidence that it will last well beyond that. By the nature of its design it will not lose its ability to hold its position over time as it does not have any adjustment in the vertical direction; something that for my application is just fine, but take that into consideration. the lower segment of the arm has only 5cm of clearance from the top of the desk and the upper segment about 7cm, so mice or keyboards can't really be used directly under it, you need to be able to position it around them. The length specifications are accurate, so be sure to use a tape measure to verify that it'll work for you. I am impressed by the design, all parts besides the clamp knobs are aluminum and have a nice black finish, and rubber pads are on the clamping surfaces. It has a feel of quality that I wasn't really expecting. It feels very solid, the only tiny bit of "play" in the whole assembly is where the arm drops into the clamp base, and that disappears if you tighten the bolt there to hold it in place.

It’s sturdy and keep my table neat

كويس نوعا ماء بس مايمديك ترفع لفوق يعني تنزل راسك شوي عشان تسولف