Silver Plating Solution 100ml

I used this product to plate a copper ring I made few years ago. I prepared the surface by cleaning with acetone followed by rubbing with steel wool. When I applied the solution the ring surface turned black but after cleaning with soft cloth a nice silver color was obtained.

Easy to use. Good results

I have pendants that had become discoloured as they are not real silver. I am so pleased that I am able to wear them again! This worked like magic and was sooo easy. I am expecting to have to re-apply the liquid regularly to both build up the tbe layers of plating and touch up any fading. I also used this on some very tarnished real silver rings. Initially the look improved but already ffing after 2 days so it may take longer to get a good colour back & to build a more robust finish on items exposed to heavy daily wear. But for the price this is worth the effort if it means I can wear favourite pieces of jewellery again.

I have used this on a Victorian EPNS teapot which was showing signs of the bronz coloured base metal over a small area. This is hard work! I lost count of the number of coatings - at least ten, I think. That is not quite as bad as it sounds, since 'the next coating can follow the last' in quite quick succession. I no longer see the bronz, but the 'replated' area still does not shine to match the neighbouring highly polished surfaces. See the slightly 'shaded' area near bottom right on the photo. I shall have another 'go' tomorrow. The small bottle should actually last a long time unless you are trying to replace an entire tea service - although perhaps I will empty it after the 150'th application on this wretched teapot!

On a silver plated bracelet showing signs of wear, I applied this product. Following the instructions perfectly. Everything happened according to the instructions except no silver was deposited on the copper base. I tried three more times and still there was no improvement. I don't recommend it!

Does work but takes a lot of applications to get a decent result. Probably wouldn't buy again.

I wasn't sure this would really work and was very pleasantly surprised when it did. I'm a bit of a magpie and have loads of cheap shiny glass tennis bracelets and rings where the silver plating has worn off and the base metal below was showing through. I followed the instructions, cleaned everything with a toothbrush and hot soapy water, dried it and then rubbed on the grey liquid from the well shaken bottle. I'd thought it would take a lot of rubbing but I just applied a thick coating, wandered off to do other stuff, and when I returned to rub the items they'd all turned silver again. Like magic. It even gave a whole new lease of life to a ring my mum bought in the 1960s where nearly all the silver plating had worn away. That too is shiny and silver looking. Don't know how long the new coating will last, but it was a doddle to do so I don't mind having to repeat the process.

Wanted to re-plate my old copper-plated candle sticks, which showed heavy 'bleeding'. However, was not sure about the effect so tried it on a brass-plated server first. After a lot of elbow grease and using abt. 1/3rd of the bottle, nothing had happened, also not on a brass sugar spoon, very disappointing! Then decided to put some of the solution on and old copper penny, and that worked! Felt more confident to use it on my candlesticks then, but tried the bobeche first, which came up very nicely. Worked my way round both candlesticks and they look absolutely beautiful again. Very pleased with the result, so a big thank you to Nushine!!First pic shows the original colour, 2nd pic is half the foot done, 3rd pic is after treating it completely. They are ready for next Christmas!Tip off to prevent over-polishing silver/plate items: if you don't use your plated silver/silver much, after cleaning/polishing then put items in a zip bag, push the air out and close the bag. Items will not turn black for a long time and is ready for use. That's what I do with my candlesticks.