Screen Protector for Samsung Galaxy S23 Ultra 6.8� Tempered Glass | 2+2 Pack Camera Lens Protector 5G 6.8 inch, Fingerprint Sensor Compatible, UV Gel Adhesive Installation

I always get a bit nervous when the words "screen protector" comes into the conversation, ever since I messed up a screen protector I tried to put on my ipad and almost ended up wearing the screen protector as gloves. My father was laughing so hard he almost fell off his chair - yes, PTSD is real people. I wouldn;t have had to be nervous about this installation though. It was amazingly easy. This protector system is similar to the spigen one I used before, although I can't remember whether there was a price difference. I managed to get this on in about 15 minutes, most of which was waiting for the adhesive to cover the entire space between the protector and the phone screen. Once it was on there were no bubbles or distortions and the finger print sensor works perfectly. The protector is also cut in a way that lets you use just about any case you have. I'm using the s-view flip case from Samsung and another one from Coolwee called "Clear with lace." I like this one when I have to put the phone in the car phone holder. But I digress. This protector set also has two black camera lens protectors (well, since there are two sets of screen protectors in this pack). I cannot really comment on these since the phone would not fit into my cases if I had put it on. But both look solid and seem to be simple stick-on over the camera protectors. No chance of bubbles here, only of wonky sticking on - which I also have a doctorate in.

Below is what is lacking, but - I will say that I WOULD buy this again despite all that. Its one of the best screen protectors.... Just several things lacking for installation (big things) --- 1. Did not come with a microfiber cloth - made installation very hard 2. The tray (with installed levels) is not level. (Had to place stuff under it to level... As seen in pics) 3. THERE IS NOT ENOUGH LIQUID ADHESIVE TO ADEQUATELY SPREAD ACROSS THE SCREEN. (Sort of - see below) 4. Bubbles after installation. (See below) First attempt didn't even come close for the adhesive to reach the edge of the screen (maybe still a couple drops in tho). 2nd attempt I made sure to get every last drop out of the liquid adhesive cartridge - this was better BUT STILL NOT ENOUGH - sort of. The 2nd attempt, after like 2 minutes the adhesive managed to crawl to cover the entire screen - but the edges were SLOW to cover - and when it was going slow, it left micro bubbles (that I see after installation). Also that second attempt left 3 non-micro bubbles too... You can see all of this in the above pictures. Overall, the second attempt was OKAY - like it works. Hopefully it will last?? But this is lacking for a more expensive screen protector.

IMPORTANT: Inside the kit are two 'foil' wrapped wet cleaning clothes. Not the alcohol ones found in the little packet, but the packets with "Step 1" and "Step 2" labelled on them. DO NOT apply this wipe to your screen before applying the protector! I'm unsure what this wipe is, I'm guessing it's an oleophobic coating that goes on AFTER, but if you start wiping your display first with this wipe, you will end up with streaks all over the device. After I wiped my bare screen with it, I caught it just before I poured the adhesive. Make sure you are using the wipe containing alcohol, not the wipe with the two-step instructions. ------ Every time I buy a phone, I always buy 3-5 different types of screen protectors. This time, however, I only bought this one. I last used an Amfilm UV screen protector with my S21 Plus. There have been some changes that are very important to know before doing anything with this! The application was super straightforward. Take your device, apply the levelling foam pads, and open the cleaning materials and stickers packet. Use 2-3 of the smaller dust stickers to cover your ports! The S-Pen port (Or your pen can get glued in), the volume rocker, and the charge top microphone home. Use the isopropyl cleaning wipe (Please make sure it says it contains isopropyl alcohol) and wipe down the display. Use the microfiber to wipe off dust, apply the fixture, and use your larger dust stickers to remove dust. Apply glue, set the glass down and let it sit for about 2 minutes! Also, make sure the foam absorption pads are fully pressed in and make contact with the sides of the phone. After it's sat for a few moments, place the weight on top of the fingerprint sensor. Put the UV light over, and I let mine sit for about 2 minutes. I removed the weight and applied the uv back to the phone for another minute. And then I was done! TIP TO AVOID EXCESS ADHESIVE MESS: Push your phone out from the fixture by pressing the screen downwards and lifting it on the fixture. Apply the UV light again all around the device's top and sides. The UV glue that leaks around will begin to congeal into a thick piece you can peel off. This is easier to clean up the excess than wiping the phone for an hour. And now you're done! Pros: +Adhesive pushes micro particles of dust OUT +Finger print sensor works perfectly +Protective +Has not peeled on me +Very clear +Easy to install +Lots of adhesive! +Built in levelling meters. Cons: -It's easy to mix up the isopropyl alcohol with the other wet wipe (which I think is oleophobic and leaves streaks) -Little bit of a tedious and intimidating process for people not used to these kinds of protectors -No dedicated stickers to cover ports! The S20 and S21 both had black stickers to block off the ports. -I would prefer the protector cover the front camera, sadly there's a cutout -There are little 'offset' dots around the screen protector, which aren't super noticeable, but they can be -No fullscreen dust sticker like the regular glass protectors have. I would have loved to see full-screen dust stickers such as what the Amfilm iPhone 14 Pro max comes with Most of my cons are to do with things I wish the kit came with or was different. The screen protector is great, the kit is great, and it's the best for the money. I hope Amfilm considers these suggestions going forward!

I had first purchased these about six months ago. As other reviews have stated instalation can be a little bit tricky. But they went on okay and looked & worked great. I had recently reordered these as one of the corners came up and was no longer sticking. The new ones looked good until I actually tried to install them. The new glass screen protector has small little nubs on the back of the actual glass. These are all over the edges and in the middle. These little nubs prevent the screen protector from actually making contact with the phone. These little nubs caused bubbles in the adhesive. The bubbles are directly in the middle of the phone and very distracting. The only bubbles are directly under these little nubs. The small nubs are actually part of the glass and not shown in any of the pictures or mentioned in the product description. I'm not sure when they changed the product, but a significant change of this type should be mentioned. If I were you, I would save my money and buy a different brand. I will not be buying the AM brand again and neither should you.

Fingerprint sensor: somewhat affected after install. Just re-programmed my fingerprints, not a big deal and worth it. It was actually not affected that much though. My print worked most of the time without reprogramming. But, use the weight provided to help during the install- it probably matters. Ease of Installation: it was tedious and required many steps. But it was smooth and easy. After reading reviews about absolutely needing both kits, I thought it was going to be a nightmare. But, I read the instructions thoroughly. Had everything set up as instructed and in order to make the install sensical. I kept the instructions on hand for reference which was needed periodically. I did not watch the videos, but I am sure they would be helpful. And it was a perfect install the first time with no bubbles and no slippage. Not sure why so many people struggled unless they didn't have or follow the instructions. Performance: phenomenal and worth it. Have dropped my phone and dragged it across rough surfaces since install (obvi accidentally) and NO damage at all to screen or protector for that matter. The protector has not even slipped out of place. Screen sensitivity: still 100%, just like without it.

First , I got a chip on the protector and as promised they sent out a replacement. The original kit included 3 protectors. I messed up the first two. The third protector worked great. I have been using it for over a year now. I do have multiple cracks and chips but the phone is protected. No bubbles or lifting corners. The trick is to realy clean the screen all the way to the sides. Once I dropped a ceramic tile on the screen and. Whike the screen protector blew out a big chunk my screen was protected. When I bought the protector I put in for a warranty replacement. As promised they sent me a new kit. I put in for another warranty but was told I had used all my warranty up. So much for life time warranty. This is a nice product.

Edit: After installing this screen protector, it is now evident that that UV glue has gotten into the ear speaker, causing it to barely emit any sound. I contacted techmatte.com CS and made them aware of this issue and they responded quickly telling me that it shouldn't be an issue and the "speaker tape" should have protected the speaker. Guess what! There was no speaker tape provided nor any indication in the instruction steps that this was part of the install! A brand new $1200. phone with issues now because of installing a screen protector! I'm not sure what the next steps are from here. Please be aware of this, if you purchase this screen protector. This was on a Samsung S23 Ultra. The process is all pretty straightforward. The instructions are clear on how to complete the process. However, getting a completely clean surface on the phone is the first challenge (phone was brand new). They provide a wet wipe and a drying cloth. I was not a fan of the drying cloth! It kept dropping tiny fibers onto the surface! I ended up using a drying cloth from a previous phone protector, which worked. It is required to put 2 bottles of the adhesive on the screen (as instructed) spaced apart. I think this was the biggest challenge. When the two puddle of glue come together, it just didn't evenly disperse in all directions across the screen. Causing issues with a few bubbles getting trapped on all sides by glue. This caused me to have to remove the first protector and start again with the new one. Of course having to clean all the adhesive off in order to start again. I did manage to get it near perfect the second time. I like this style of UV light curing adhesive and when done right, it looks beautiful. Good luck to you all!

OK, so this is the second brand we purchased for the Samsung S23 Ultra screen. Compared to the first brand we tried, this was MUCH better. But, the fingerprint is still "iffy" and takes more pressure and tries than our old glass protector did on the original phone (we had to get a replacement phone, so we lost our glass protector it had on it sadly when we sent it back). It does seem to be protecting the screen from my husband's ridiculously harsh treatment of his phone. "I don't understand why your phone never has problems with the screen scratching or cracking," he laments. I don't toss it into bags of tools or balance it on the top of the car or shove it my pocket with metal keys. But, yes, it is most definitely a mystery why I don't have to keep replacing my phone screen... If you are more like my husband and your phone takes a beating and you prefer to keep doing that rather than preserve your original phone screen by simple care, you should definitely consider a screen protector that is built for your habits. This one probably won't protect it much for drops or direct hits with tools, but it is catching the scratches from keys. Rather, this gets scratched and that is the job of it. If you want something to actually provide protection that won't scratch easily itself, you may want to look for something not also made of glass. But, this keeps your screen readable like there is nothing on it at all, and that was the goal for us. Now, the instructions that the company directs you to are lousy. The QR code you scan and follow takes you to the company's web page which will show you applying a glass cover... Just not with anything you will find in the box they sent to you. I assume someone forgot those QR codes were out there in the packaging on old inventory and swapped in a different product demonstration on their site. So annoying. It costs them nothing to simply make a new page for new products so the older products URLs stay intact, but I digress. And, you WILL NEED AN INSTRUCTION VIDEO to get this application process right. Do a quick search on Youtube and you will find some good ones for this product that show you the delicate technique that works. I got it on my first try, though I was a little quick on the draw lowering the screen onto the adhesive "pools" and I had to wait 10 minutes for the adhesive to finish the final spot and use an orange stick on one outer edge to gently guide the adhesive that has squashed out there around the edge to the part which didn't have any coverage. Surface tension and light hand allows that to work. Do not touch the screen protector or bump it while the adhesive is still wet!!! The little bubble windows on the application structure was a fantastic help as I didn't know my desk was not level. I used a small stack of sticky notes under one corner to lift it until both bubbles were dead in the middle of the viewers. Having this level for proper flow of the adhesive runny liquid is key, so I was grateful for that feature. The UV light box they send you is pretty cool and worked great. You can also repurpose it later to dry your gel nails, so that is pretty cool. This fit the phone perfectly and we are happy with it overall. I'm lowering the stars because of the following: 1. They are selling old stock and didn't replace the wet wipes that have long since gone dry in the kit. You will need to have your own rubbing alcohol on hand to re-wet those. 2. Bad instructions and a very complicated process. 3. The fingerprint is still buggy since applying this, even after recording new prints (which was challenging with this cover on as the phone couldn't read a print through it easily).

Ninguno de los protectores funcionó, uno de ellos venía totalmente roto. Lo califico con una Estrella porque no se puede poner ninguna.

Edit: Changing my review to 1 star. I just found out the glue actually seeped into the pen compartment during installation, something I never even thought to check. It was a complete mess to clean, and I’m not sure how much glue got inside. Thankfully the pen still works, but this could have easily ruined it. Really disappointed and would not recommend this product. The kit looks clear at first with great packaging, but the installation is extremely unforgiving. Every step has to be 100% precise with no room for error. My first attempt left part of the screen damaged while removing the leveling frame before the second UV cure. On the second try, a dust particle slipped under as soon as I placed the screen, ruining the result. Considering the higher import cost and long shipping time, the whole experience was very disappointing.

Fitting is good and all. Sides looks nice with no dust going in. (After 1 month) My only complaint is the fingerprint sensor works 1out of 3-4 times. Yes i added them after installing the protector but still same issue. I follow every sing step as per the utube videos.