6-Pack 30PIN ESP-WROOM-32 Development Board, Aideepen ESP32S Esp32 Development Board 2.4GHz Dual-Core Compatible with Arduin0, Nodemcu,and MicroPython (30PIN Micro USB)

These work better than the ESP32s that use USB-C. I bought them thinking they were USB-C cable type and when I opened the bag, I was like “ahhh shoot”, but to my surprise they worked better than any of the previous ESP32s I’ve used (which were USB-C). I never had a firmware uploading issue when using platform.io, anytime I pushed the code onto it, it worked 100% of the time (and trust me I’ve dealt with ESP32s that have issues with code uploads). Keep in mind they are not USB-C.

I finally made the switch from Arduino to ESP32 - what a difference! I was up and running very quickly since the Arduino IDE easily recognized this module. I'm just OK with coding but with the help of an online AI program, I was getting several projects running fast! Hook up is a breeze as all of the pins are identified by silk screened markings. The only downside to this is the pin spacing from one side to the other - it's too wide for my old prototyping breadboard (it's one row too wide to fit). Luckily, for my project shown, I only needed 4 pins that were all on the same side. I'm going to order a new breadboard to address this issue. The module is very well built and has two onboard LEDs and two buttons - one of which is a handy reboot. At around $5 per module, this is a GREAT deal!

Easy to set up and use. Fast and works well. Built well, also easy to connect with jumper wires or soldered on wires.

Wish they gave a cable along with it. Other than that works fine .

Good Product

4 out of the six actually I was able to program, one would not except the program with out errors, one was not even recognized by the computer at all. Won't buy these items any more. Lesson learned.

Only three of these worked. The other three aren't even detected when I plug them in. I'll be returning them.

It works great, but be warned that it is an odd form factor if you’re looking for CAD models online. I was trying to design a PCB for it and found it was a little tricky due to the pinout being inconsistent with similar models. Other than that, no complaints. I’m using a Bluetooth controller library and was able to connect it to an Xbox controller with no issue.

One wouldn't connect to port but the other five worked perfect. The chip does self enabling which I really appreciate when setting up the program.

Facile a programmer avec Arduino IDE, je me suis fait une station météo avec des capteurs et un récepteur qui affiche les informations. Pour tout types de projets.

THE PRODUCT WAS 50% DEFFECTIVE. sTOPPED WORKING i ORDERED 6 BOARD AND 3 BROKE AFTER SHOR USAGE

The ESP-WROOM-32 dev board is incredibly versatile for IoT (Internet of Things) work. I’ve used it for everything from sensor monitoring to LED control, and it’s never let me down. The dual-core processor handles multitasking smoothly, and having both Wi-Fi and Bluetooth built in makes it great for connected devices. Flashing firmware through the Arduino IDE or ESPHome is straightforward once you install the drivers, and it works with both USB-C and micro-USB versions depending on the board you get. The onboard antenna has strong range, and GPIO labeling is clear. Excellent value for prototyping or permanent smart-home installs.

Order came quickly and all six worked, including wifi setup and testing with light strips using WLED program. That is more than I can say for ESP 32 boards that I have ordered from other suppliers, so I will order again from this supplier.