Cocomfix Black Appliance Touch Up Paint - High Gloss Paint Touch Up for Refrigerators, Washers, Dryers, Dishwashers, Microwave Oven and Other Appliances. 1 Fl Oz (Black)

Got this to touch up some rusting places on the racks of my dishwasher. I sanded off as much of the rust as possible, (don't ask me how plastic racks on the inside of a dishwasher could ever rust in the first place!) I'm pleased to say that this touch up paint has withstood at least 15 wash cycles now and still appears to be protecting from further rusting. It is very easy to use, it's not too thick or too thin. I put on about 3 coats and let each application dry good. It dries fairly quick & it wasn't too expensive. Much cheaper than replacing a rack. No doubt I'll have to touch up again before too long. But that's to be expected as I don't believe the paint was designed to get wet with steamed hot water and soap regularly. So considering that fact, I'm very pleased that it stuck to the rusted area fairly well and hasn't come off thru all the washings! I'm sure it works totally fine for touch up of black surfaces, and obviously would easily endure wiping down/clean up, etc. on a stove top, fridge, etc. (Warning though, do not breath it too long! Work in short time frames b/c the fumes will gitcha! I found out the hard way, but that was my fault-i.e. leaning over the little area I was working on too long.)

Pleasantly surprised by how well this paint matched Toto Cotton White! I used an epoxy to fill a chip caused by a dropped screwdriver and, after the epoxy cured really well (about 24 hours), I painted over the repaired chip with the enamel appliance paint. When it goes on, it looks too light in color but, after it dries, it matched our sink very well! Will plan on applying a few more very light coats, and then a final buffing. I venture to wager that the repair will be nearly invisible after I’m done. The paint went on very smoothly and had a decent working time. Once dry, it seems pretty solid, and doesn’t come off easily .I recommend several light coats of paint only after filling the chip or crack with an epoxy. This paint is not designed to be a filler and is really more designed to cover over a filled chip or crack.

Worked great 👍

Covers well but should not have to use on 2 year old Samsung fridge

It helped me to paint some minor spots in my appliances

As far as color goes, this touch up paint did a good job of matching the color of our freezer. Also, compared to other touch up paint the price was considerably less expensive even though the container is small. But I just can't give a higher rating than 3 stars. The paint needs multiple applications because the color is just too thin. The dark color of the scratch continued to show through. By the time I have made several applications the area of repair becomes very noticeable due to blotching of the paint. It definitely is not like what is shown in the photos. I really wanted to like this touch up paint. I do see many 5 star reviews, but in my case my experience has been similar to the lower reviews.

This is definitely white. I sent back two different products that said they were white but when dry looked gray. Also, if you have old appliances like I do nothing is going to match factory paint exactly. Just know this is very thick. It is not supposed to be used like paint but more for rust spots or deep spots to be filled or evened out. Worked great for my needs. Would buy again.

Received this last night. Went to use it today and the cap unscrewed but the brush is still attached to the bottle of paint. Never had this problem with any touch up I've ever used. Would not recommend this product.

Worked well touching up a few marks on our washing machine