Deck-O-Seal 4701033

We bought a house with a pool and the expansion joint was a mess. Our first winter, we lost a bunch of tiles due to water freezing in the expansion joint and some online research led me to deck-o-seal. I definitely recommend backer rod if your expansion joint isn't nice and uniform and relatively shallow - I had many large gaps that took a decent amount of backer rod and would have been a huge pain to fill with this sealant. I waited until around the time we closed the pool at the end of the summer to do this job to maximize work time, which worked pretty well. Try to do it on a day that's not windy. It was breezy when I did it, and it was really tough to prevent bits of leaf and debris from getting stuck in the sealant as I applied it and it dried.When I took the cans out of the box - I ordered three since I didn't know how much I was going to need - every large can had a dent in the same exact spot from impact of the smaller can. There were some minor leaks that had dried on the outside of the can as a result, but it wasn't a big deal. Nearly everything you need is included in the box. You'll need a funnel if you don't want to get this stuff all over everything as you transfer it to the bottle. Luckily for me, I had one laying around that I use for oil changes and I just bought a new one for that purpose after I was done. If you don't have one, go to an auto parts store and pick one up before you open the cans. The other thing you'll need is paper towels. If you're messy like me you'll need a whole lot of them. Cover the surface you're mixing on with them and keep a bunch on hand while you're filling the bottle.Prepare yourself when you open the cans - this stuff smells absolutely awful. The description says you can use it indoors and outdoors, but I feel sorry for anyone that tries to use it indoors. Mixing it is fairly easy. You might want to have a few spare paint stirrers on hand since this it is quite thick - I broke one or two. As mentioned before, you'll need a funnel if you want to avoid making a complete mess, and even with one you shouldn't expect it to be clean. It was difficult to stop the flow of sealant quickly once you got it going out of the can. I used the little can to hold my funnel in between fills and catch the excess that slowly oozed out of it.Actual application was pretty straightforward. I cut most of the nozzle off for a bigger hole because the joint I was filling was large. In a lot of spots, the thick sealant gradually flowed around the backer rod, leaving what looked like a backer rod that had been dipped in sealant and placed in the joint. I had to go over many of these spots several times with about 10 minutes in between to get it to look right and set up flush between the deck and coping instead of curved around the backer rod. I ended up needing all three cans, but my pool is pretty big and my expansion joints were in pretty rough shape. It was a really tedious job, but it will probably be much easier for you if your expansion joint is in good shape.The end result looks nice and I'm definitely looking forward to not having to retile a bunch of spots in the spring. This stuff is pretty expensive and not a blast to work with, but it's definitely worth it and forms an effective and natural-looking seal. I absolutely recommend it.

Product arrived with larger gallon can (base) with significant vacuum enough to crush the sides but can wasn’t open. Smaller can (Hardener) was leaking product from what I can assume to be thermal expansion from a hot delivery truck. All that said, product seems to perform well when mixed and installed.

I can’t imagine buying any other caulk product for around my pool. It’s self leveling which is a must. Also don’t forget to get the backer rod filler too.I’m not very handy on some types of hone improvement hobs. But if I can do it so can you.I had never used this product before or even replaced the caulk around my pool before. But I read up and bought excellent product like this. Make sure you get a super hooked knife type tool to help remove old caulk. That too is a must for the job.So, Instead of paying hundreds of dollars to have a pool company replace the caulk around my pool I did it myself. It’s time consuming, but not difficult. You have to take out the old caulk and backing first. Then you insert backing tubes of the correct size. Top with self leveling( a real must) caulk on top. I personally then add a little sand after the caulk has started to dry a few minutes. I pick a color close to my pool coping. This helps with how the overall product looks in the end. Plus it’s exactly how my pool company did it and charged me almost $400 the first time.I will only buy this product the next time I need a self leveling caulk for my home improvement job.

The media could not be loaded. I’ve used this product in the past, without issue. Mix it appropriately, and move quick so you have enough time before it starts to set. Bought 4 of these, and none of them set up correctly.. Ended up with a complete mess of the entire job. Had to remove all non cured product for 8hrs with 4 men. I don’t recommended buying from this source. I think it must’ve been faulty hardener, I’ve talked to people in the caulk world that have used this as well, and their explanation was just that. Some areas set up and product worked fine, on the same line other areas didn’t work at all. Again, it was all mixed accordingly. I used three of these, and know where the start and end was of each batch. Product cured wildly different throughout the entire thing.

My pool is 15 years old and I've had the deck caulking replaced once. It needed recaulking, since water was getting behind the tiles and freezing, popping the tiles off the pool wall. I ordered the decking sealant and backer rod for about 120 feet. The product is a "mess" to mix (2 parts) and get into the plastic caulking bottle. Then cutting too small a spout makes distributing the caulk very difficult because you need to squeeze very hard. Cutting a larger opening makes it easier to squeeze, but the caulking flow rate is harder to control and you need to clean up more drips and uneven distribution. I would say the product is okay, but it would be MUCH better if you could use a caulking gun, rather than the plastic bottle.

We have an old pool at a house we recently bought. The expansion joint filling had failed, and rainwater was causing significant shrink-swell problems with the concrete deck. Spent time with a multitool, grinding out bits-and-pieces of the old sealant and debris, then filled the gap to 1/4" - 1/2" from the top with pea gravel and sand and tamped it down.Removed the Deck O'Seal's gallon can ring using a can opener, then mixed the two cans together using a stirring drill attachment for 10 minutes. Poured into the plastic pouring (3 -4 refills) bottle and squirted it carefully into the gap. It self-leveled nicely. We waited about 20 minutes, then sanded it lightly with fine sand. Though the weather was mild (low 70's) by the last refill of the pouring bottle the compound was getting pretty thick and hard to squeeze out of the bottle.It looks pretty professional and we're hoping it lasts a long time; we estimate we saved more than $700 doing it ourselves.