4" Float Switch Stainless Steel Tank Water Level Sensor 110V ES10010 Wire Length 12inch
Product ID: 52081486
Details
- BrandELECALL
- Current Rating0.5 A
- Item Weight0.05 kg
- MaterialStainless
- StyleES10010 1
Desertcart purchases this item on your behalf and handles shipping, customs, and support to South Korea.
Elecall 4" Float Switch Stainless Steel Tank Water Level Sensor 110V ES10010 Wire Length 12inch: desertcart.com: Industrial & Scientific Review: Perfect for my application - Very easy to change from normally closed to normally open. It is delivered normally closed with float up with wires up. Pop the lower c clip off, remove and flip the float 180 deg, put clip back on and you’ve reversed the action. I wired it in series with control side of a relay to wait for a reservoir to fill before activating a heater. Working great immersed in 60 C hot water. Review: Great Product. Open on Float or Closed on Float. Just FLIP FLOAT!!!!!! - Sorry, but People can not read directions. It works IN either NO or NC. Just Flip Float Yes, It can also be mounted from TOP or Bottom. IF IT FAILS its because you are trying to pull too much power through it. It is designed to switch a relay or something that pulls lower than 20Va. This thing is currently operating the water level in a Industrial Hot water Parts Washing machine. Water temps are 180 F. It is constanly having to fill. BUT as the directions explain, you need to use a relay to drive the water solenoid. I found one solenoid that is used for Ice Makers that is lower than 20 Va.
| ASIN | B01LWX97CC |
| Best Sellers Rank | #149,529 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #58 in Liquid Level Sensors |
| Brand | ELECALL |
| Brand Name | ELECALL |
| Current Rating | 0.5 A |
| Customer Reviews | 4.1 out of 5 stars 93 Reviews |
| Item Weight | 0.05 kg |
| Manufacturer | Elecall |
| Material | Stainless Steel |
| Material Type | Stainless Steel |
| Maximum Supply Voltage | 110 volts |
| Measurement Accuracy | +3% |
| Model | 6930246703608 |
| Mounting Type | Flange Mount |
| Number of Items | 1 |
| Output Type | Push-Pull |
| Part Number | 6930246703608 |
| Sensing Distance | 4 inches |
| Style | ES10010 1 Floater |
| Style Name | ES10010 1 Floater |
| Unit Count | 1 Count |
R**N
Perfect for my application
Very easy to change from normally closed to normally open. It is delivered normally closed with float up with wires up. Pop the lower c clip off, remove and flip the float 180 deg, put clip back on and you’ve reversed the action. I wired it in series with control side of a relay to wait for a reservoir to fill before activating a heater. Working great immersed in 60 C hot water.
L**B
Great Product. Open on Float or Closed on Float. Just FLIP FLOAT!!!!!!
Sorry, but People can not read directions. It works IN either NO or NC. Just Flip Float Yes, It can also be mounted from TOP or Bottom. IF IT FAILS its because you are trying to pull too much power through it. It is designed to switch a relay or something that pulls lower than 20Va. This thing is currently operating the water level in a Industrial Hot water Parts Washing machine. Water temps are 180 F. It is constanly having to fill. BUT as the directions explain, you need to use a relay to drive the water solenoid. I found one solenoid that is used for Ice Makers that is lower than 20 Va.
F**H
N.C.
Good S.S. construction. The float electrical contacts open during high level and close on low level. This needs to be noted in description.
R**N
Unpredictable
Some times doesn’t work. Got 2 and both do the same. Makes me worried I won’t be there and it over flows
J**A
I'm happy
I couldn't figure out how to tell how full the blackwater/graywater tank I installed on my skoolie was. I also wasn't sure if this this 110 volt float switch would work with 12 volts. I connected the wires to a 12-volt LED, and it did. So I installed two in the top of the tank at different levels and wired them to two 12-volt LEDs in a box, Now I know when it's nearly full and at the its-all-the-way full-you-gotta-dump-now level.
H**O
works well in my off grid garden
I use it to stop the pump when the water towner is full in my off grid garden. I have it run through a relay to start and stop the pump. Works very well.
R**.
Wrong size description
The description is in INCHES but the device is in CENTIMETERS. Well made but not for a sump pump.
D**L
Nice Feel
Unfortunately it wasn't quite a fit for my purposes but has a really great quality feel too it for the price and I did test it to verify function.
Trustpilot
1 month ago
1 month ago