14IN Vented Cantilever 1 RU Rack Shelf | Designed for 19” Equipment Racks. Heavy-Duty 2.4 mm Cold Rolled Steel, 60lbs Capacity

The AC Infinity Vented Cantilever 2U Rack Shelf has exceeded my expectations for organizing and supporting my equipment. This shelf's heavy-duty construction made from 2.4mm cold-rolled steel gives me confidence in its ability to hold up to 100 lbs without any issues. I've used it to secure various components in my 19” equipment rack, and it's proven to be both sturdy and reliable. I particularly like the vented design, which helps keep my equipment cool by allowing better airflow. This feature is crucial for preventing overheating, especially when dealing with high-performance devices. Installing the shelf was straightforward, and it fits perfectly within the rack, providing a stable and secure platform for my gear. The only slight downside is that it adds a bit of weight to the rack, but this is a minor trade-off for the durability and load-bearing capacity it offers. For anyone needing a dependable and strong rack shelf, this AC Infinity model is a fantastic choice. Its robust build, easy installation, and efficient design make it an excellent addition to any setup. Highly recommended for those looking to optimize their equipment organization.

This was very easy to install. The rack is very sturdy and was exactly what I was looking for to hold 3 Sonos Amps (~15 pounds in total).

This 1 RU shelf was perfect for mounting three small NDI-to-SDI converters into a portable production rack where space was limited and I needed good airflow for the converters as well as the rest of the equipment. The shelf is solid, not flimsy at all, and the slots gave me flexibility in arranging and securing the devices. I originally used 1/4-20 bolts (had to drill into the shelf), but later switched to zip ties because the pan head bolts didn't allow enough clearance to the equipment below. I'm going to be building another portable production kit and this will likely be purchased again for it.

This is the second one of these I've purchased. They are very well made and will stand up to any load short of something stupidly heavy like a car battery. I've purchased probably a dozen different rackmount shelves over the years. A few are lousy and I wouldn't buy again. Most are "good enough." A few are "fantastic" and this one is definitely in that category. The shelf looks and feels to be 1/8" steel (or close to that thick). It's heavy and does not flex. At least on the one I received, the paint job or powdercoating is thick and smooth and should last. Icing on the cake are all the slots, which while their primary purpose is ventilation, they are great for running zip ties through to secure all those little boxes that aren't "rackmountable" and why you probably bought this shelf to begin with. Comes with 10-32 screws to mount the shelf and cage nuts in case your rack uses the push-in style cage nuts vs. having threaded rails. Could not make this shelf better if I could wish it into existence. Highly recommended.

Overall this shelf is really good. Good build quality. Sturdy. And great value for the price. My only complaint is that this shelf has a bottom lip below the shelf that extends below the 1U size and can interfere with components below it. For example, trying to install a blank panel below this shelf is only possible if you install the blank panel before installing this shelf. Otherwise it's basically impossible to tuck the blank panel underneath that lip that extends below this shelf. Overall, great value for the money, and gets the job done. Just be careful about using it above another component with that bottom lip.

There are a couple things I'd highlight about this shelf. The biggest characteristic I want to highlight is that it has been carefully made to eliminate sharp edges and corners. It feels smooth and has a surprisingly nice finish to it. With a lot of rack gear you run the constant risk of cutting yourself, but this shelf is actually very nice. The material is heavy enough to support reasonable loads on a standard cabinet and because it is a cantilever half depth shelf, it only affixes to a single rack rail. The shelf also includes ample opportunity on the sides to affix cables with tie straps. I do not think the venting in the shelf itself would work well for tie straps, but there are nice long slots on the side that lend themselves well to aiding in cable management and for passing cables from the shelf in an organized fashion. The product is nicely packaged and includes rack screws and nuts, which work perfectly with square hole racks. I will be ordering an additional shelf for my humble home rack and comfortably recommend these to anyone.

This is a *very* sturdy shelf, especially for this price. I have been in IT (networking/hardware/virtual infra etc.) for ~15 yrs now and this is a great deal. These are in fact better than most similar examples I encounter in data centers and I’m certain these are 1/2 the cost... I bought 2 to add to my home office telco rack and will buy another couple given the quality/price point. This can easily accommodate a small server/tower or network gear you (if don’t have brackets for said gear). A nice bonus here is it includes telco rack screws (works on threaded telco racks and also standard square hole racks using included captive nuts). Definitely recommend - will definitely hold rated weight (probably more without issue).

Pros: I purchased this product as a short term inexpensive solution to getting my pedals locked down somewhere. I use an overdrive, a couple gates, a wireless unit and an aby pedal to split my signal. Everything stays on, so theee is no need to have a slide out drawer. Heavy duty zip ties secured my pedals with no issue. I love the shallow depth! Cons: (these are specific to me and my application)Adjusting the setting on my overdrive for the room is a bit of a pain, my rack is only a 4u and there is a tuner and power conditioner above the shelf. So there’s a pretty low clearance to get my hand in there and make adjustments but it’s absolutely doable. I had to zip everything in outside the rack which makes changing things an extra couple steps. Lastly it’s crazy heavy. (Not really a con unless you’re concerned with weight) this thing appears to be tough as nails. My one real gripe is that I wish it had larger vents so i could run zip ties through from any direction. I will be purchasing a rack drawer that pulls out in the future which would likely remedy all of my issues. Would recommend if it suits your needs! 5/5

Excelentes materiales, buen calibre y para instalaciones micro empresa u hogar hace un trabajo perfecto, la recomiendo ampliamente.

Mycket bra kvalitet samt att rack skruvar följer med. Väldigt nöjda :)

Ist recht teuer, aber dafür auch echt stabil.

Great shelf. Does what it is supposed to. Great weight rating and very sturdy. The included screws are a nice touch. Oh and the price is amazing!

Bought this to hold my Synology DS1812 NAS, full of 8 drives. Definitely less than the weight limit for this shelf, but the shelf still seems to lean downwards at the back where there's less bracing. Makes mounting an item below the shelf almost impossible (without the shelf leaning on the item, making the shelf pointless). Would not recommend for anything heavier than a few small devices (mac minis, routers, raspberry pis etc.).