eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Silver

I give this eSUN PLA+ filament 5 out of 5 stars. It’s one of the most dependable filaments I’ve used for everyday 3D printing. The black color is rich and consistent, giving finished prints a clean, professional appearance. The filament arrived vacuum sealed and neatly wound, feeding smoothly through my printer without tangles or interruptions. Print quality was excellent, with strong layer adhesion, crisp details, and very little stringing. I didn’t experience any clogs, and the dimensional accuracy was consistent throughout the entire spool. PLA+ is a great upgrade over standard PLA, offering added strength while still being easy to print. Whether I was making functional parts, prototypes, or display pieces, the results were consistently impressive. If you’re looking for a high-quality PLA+ filament that’s reliable, beginner-friendly, and produces great-looking prints, I highly recommend this one. I’ll definitely be buying more colors in the future. ⭐⭐⭐⭐⭐

I found a 3D model for an interesting skull so naturally I wanted to print it out. A small test print with white filament came out great but the color just wasn't right. Does anyone make a bone-colored PLA filament? Of course they do. I'm not the first weirdo to 3D print a skull after all. A minute of searching brought up this spool from eSUN, and after a few clicks, it was on its way to me. I've used eSUN PLA before and, while I prefer Elegoo by a very narrow margin, eSUN has given me good results. I was a little worried because the skull I was printing would have to be done in 2 parts (skull and mandible), and the main part was a 23 hour print. Plenty of time for something to go wrong. Bambu has a preset for eSUN PLA+ so that's what I used. After slicing, loading the spool, and hitting the print button, I crossed my fingers and walked away. I checked on it again in the morning (12 hours later) and so far everything looked good. Layer lines were visible but not too prominent. Since I was using a 0.4mm nozzle, I didn't expect the lines to disappear. There was a slight gloss to the print. I would have preferred a matte finish to simulate bone porosity, but since I didn't specify a matte filament, I was neither surprised nor disappointed. At the end of 23 hours, the skull was waiting on the build plate. It looked exceptional, without so much as a stray filament, void, or other defect that I could see. The support material (there was quite a bit of it) broke away without much fuss and I was left with something that, from a few feet away, could pass for a skull. Adhesion was just right. The part never shifted during the print but was relatively easy to remove from the build plate once everything had cooled. I did use a little hairspray as an adhesion promoter-- I wasn't taking any chances-- but I doubt that I actually needed it. The mandible was a much easier print (only about 6 hours) and it came off without a hitch. After years of dealing with finicky 3D printers and filaments that would only print correctly about half the time, I was floored that I could walk away for an entire day without looking over my shoulder once and come back to a completed print. I usually pay $10-$12 a spool for garden variety PLA. This spool was slightly pricier at $18, but it is a specialty filament and the price is quite reasonable for the quality and appearance that you get. I can't think of a single bad thing to say about this filament. It worked flawlessly for this project.

I’ve had consistently good results with eSUN PLA+ filament. The filament feeds smoothly, prints cleanly, and produces good layer adhesion without requiring much tweaking to my printer settings. I experienced very few issues with stringing or clogging, which made longer prints much less stressful. The spool was wound neatly, helping to prevent tangles during printing. I was also happy with the color—it printed true to what I expected and gave finished projects a nice, professional appearance. Whether you’re printing functional parts, toys, or decorative items, this filament offers a good balance of strength and printability. Overall, it’s a dependable PLA+ option that delivers consistent results and is one I would purchase again.

Great filament! It printed consistently with no clogs, tangles, or feeding issues. Layer adhesion was excellent, and the finished prints came out with a smooth surface and accurate colors

Although SUNLU remains one of my personal favorites, this PLA+ filament from eSUN has been equally impressive. The color is vibrant and exactly as expected, and the filament prints with excellent dimensional accuracy. I experienced smooth feeding, strong layer adhesion, and consistently high-quality results. The filament is reliable and easy to work with, with no significant clogging or tangling issues during printing. Overall, this is a high-quality PLA+ filament that produces outstanding results and offers excellent value for the money. If you are looking for a dependable filament with brilliant color and precise printing performance, this is an excellent choice.

Great color but the filament isn't as good as others I've compared it to. Biggest issue it has is stringing. I've tried multiple temperatures and flow rates. It's just a recurring issue with this filament.

The filament worked great on my Anycubic Kobra X. Nice color on finished print, no strings, bed adhesive was good, supports snapped off very easy and clean. Good value. This print was only 1hr and 35 min, the next part is 6 hrs if the print quality changes, I will update my review.

I bought two spools. The first one was pretty great out of the package, although not all that evenly wound. Then, around the 80% mark it started popping and hissing, something I’ve never experienced because I’ve never used cheaper filament. The filament was wet, and it was bad. I used the rest of the spool and tossed out the remainder. My print was pocked and bubbly on the outside because of the popping. So I moved on to the next spool. It was ok for a while but got tangled on the first print. Wasted about 6 hours of time and filament on that one as it was only halfway through and now way to fix it. From then on it was just a mixed mess and would only print properly for two hours at most and then either snap, clog, sizzle, or not print correctly. I wanted to like this filament, but this was mostly a waste and a massive headache. This filament has caused more problems than other filaments I’ve bought over the past four years combined, but the last one was the one I didn’t much care for the most. The filament snapped and completely jammed my extruded. If I would’ve trusted this filament and left my house like I intended I would’ve come home to a messed up extruder and possibly a burnt up motor. I was only outside for two minutes and I came inside to check and the extruder was clicking and the motor was HOT. I stopped the machine, I tried to take out the filament to no avail, and then completely disassembled my extruder to find segments of filament inside it and the upper and lower cap bowden tube. Never seen a failure that bad. I don’t recommend this filament if you’re using a printer that prints fast 150mm/s+ because things can go from bad to worse very quickly. I’ve only had issues with moisture from PC, never any kind of PolyA+, and never had breakage issues like this. It was very upsetting and I had high hope from others recommending this brand and type.

Excelent... Print ok... machine ok... Only apply the write setting

Printen vanaf 210 graden!

Assez bonne facture, j'en suis content!

N'utilisant que du Filament ESun depuis des années, je n'ai jamais déçu (pla, pla+, lw-pla, petg, tpu). Cependant ce Filament orange en particulier est magnifique une fois imprimé. La couleur reste éclatante et uniforme. J'ai utilisé ce Filament pour imprimer la structure de mon planeur radiocommandé, qui sera entoilé de tissus de parapente. Je recommande ce produit, j'en recommanderais moi même assez rapidement, bobine presque vide

I have used eSun PLA+ filament for several years on a Voron 2.4 printer. Until recently I was getting near-perfect results every time. The last batch I ordered came in the new cardboard spool. The result straight out of the vacuum sealed factory bag is CATASTROPHIC. Bubbles everywhere and stringing as bad as PETG. Horrible ! Unfortunately I have missed the return window otherwise I would have sent it back.