Coleman Powersports Gas Powered Mini Bike

Un boîtier très bien conçu avec une excellente qualité de refroidissement et un montage très facile de tous les composants internes. Belle qualité quasi tout acier et très peu de vis. Design sobre et sans chichi. La possibilité de démonter complètement la face supérieure avec 2 petites vis est géniale pour installer un radiateur AIO et accéder aux connecteurs 12v de la MB. Filtres partout accessible via des plaques magnétiques. Plaque de cache des fils arrières. Existe en blanc et en RGB. Juste top. Plaque de montage immédiat de l’alimentation super idée. Parties vitrées sécurisées à l’ouverture. Filtres à poussières partout. Caches métalliques des fils en partie arrière. Possibilité de monter un radiateur et partie basse pour refroidissement graphique à haut et d’un AIO de 420mm en face avant en lieu et place des ventilateurs livrés. Les ventilateurs integrês sont livrés montés à l’avant et à l’arrière. Un adaptateur bien repéré est fourni pour le montage rapide des liaisons unitaires du panneau de commande tels que power on, reset etc…. Affichage LED intégré au boîtier de la température CPU et GPU via une application windows qui pourrait cependant être améliorée pour sa stabilité. Discord de support ANTEC réactif. Prix très concurrentiel pour la qualité.

Ce boitier est vraiment facile à travailler dedans. Le top s'enlève facilement pour faciliter le travail, des gros panneaux en arrière pour cacher les câbles, des ventilos d'origine de 30mm d'épaisseur au lieu de 25mm (donne un peu plus de pression statique), très solide, de la place pour les câbles en arrière et, enfin un qui s'est réveillé, un boitier qui offre les câbles du front panel en un bloc (qui ressemble à ceux de l'USB 2). Par contre, ce boitier est vendu comme étant une grande tour, or, c'est plus un gros moyen tour. Il est considéré comme grande tour juste parce qu'il peut prendre des cartes mère e-atx. Et le seul point négatif que j'aurais à dire c'est que si vous voulez mettre des ventilos dans le bas, ça prend des vis longues (ceux qu'on utilise pour fixé les ventilos sur les rad d'AIO) et Antec ne les fournis pas

m-ATXからの載せ替えで購入 前後、上下に通気口があるので、エアフローは抜群です 背面部も、スッキリ束ねられるマジックテープが付いているので、かなり纏まりがいいです 大きいですが、その分作業がしやすく、あり余るくらいビスなどが付属されています(笑 元々ついているファンは少し弱いので、エアフローに拘る方なら交換する方がいいと思います あと、温度表示させるには、ドライバーを入れる必要がありますのでご注意を あと、両面ガラスなので、当たり前ですが重いです(笑 前と上下に引き出し式のエアフィルターもついているので、手入れも楽で、私的には大満足です

This is the first pc case I've ever bought and had to transfer into. I'm kind of new to pc gaming. Only been at it for the past couple years, and never did anything like this before. Thankfully, this case made it super easy. The size, options and components make transferring into this case super easy. The cable management looks incredibly clean by the time you're finished. The holes for the cables have these nice rubber padded openenings, and the openings are all over the place to maximize which cables come out where. All the panels (the top, sides, cable channel covers marked 1 and 2) are simple to remove. They utilized these metal notches that slot in, so you only need one thumb screw to secure them, which is pretty neat. Even without the thumb screws, there are these ball joint things the panels snap into, so the thumb screws are just an added redundancy. I had 2 3.5" HDDs. In my original review, I said there was only space for one but it turns out I'm bad at reading directions. There is space for 2. There's room for 3 separate 2.5" drives on the cable management side, so plenty of options for expanded storage. The ventilation is all over the place on this thing, so it shouldn't have any problems staying cool, and keeping air going. Speaking of air, the fans it comes with are big 140s in the front, and from what I can tell, they pull a lot in through that magnetic front vent panel. I had a situation with my motherboard in my old case, and my wishes were granted with my top mounted AIO here. The old case had a problem with space for said AIO at the top because I have the extra thick Arctic 360 radiator + fans, which had to be installed kinda of slanted to get out of the way of the CPUs power cable (the connector for which was at the very top of the motherboard). With this new case, there's enough space for everything to fit as it's supposed to. I haven't done any customizing of fan curves or anything, but I played some Cyberpunk 2077 at 4k with Path Tracing and all bells and whistles on, although not for very long yet, and my cpu and gpu stayed cool as a cucumber. My 3080 used to get up to the 80s. The 4090 doesn't go over 70. I don't know if it's the case, or the cooling system on the GPU, or both, but regardless, it's running nice and cool. I saw a video on YouTube about this particular case being a little more noisy than the more pricey ones like the Meshify 2, but if what it produced was more noise, I couldn't hear it. It's much quieter than my last case, that for certain. I'm not sure what else to add that is worth while. If you get a 4090 for this case, you may have to slip the top pci slot cover in over the back of the 4090, because the plate on the top of the card sticks out a hair on the back side. You sort of have to wedge it in (angled 45, tuck in the bottom edge over that plate, then put it upright, then push it in toward the motherboard, then you can screw it in, or even just leave the screw, because it can be a hassle, and it being slightly wedged in will keep it in place). One of the neat things about it is the screens are very easy to remove. The bottom one can be slid out from the front, like a lint trap on a dryer. The front most panel just.. Pops off with a light tug because it's magnetic. I'll be up front here, as I said, I am fairly new to pc gaming, cases, etc., but I am thorough, and from what I have found and seen for myself, it's a great case, while also being very affordable. The biggest selling point other than the ease of use, is definitely the cable management. It is CLEAN when you do it right. It looks awesome if you don't care for the RPG puke, and enjoy a nice dark and sleek appearance. Also, for being a "full" tower, it really doesn't look much bigger than the mid tower I had previously. Maybe if you jump from a small tower to this one it'll be more noticeable to you, but it fit great in the same spot. All in all, I definitely can recommend this case. Especially for those on a more beginner/intermediate level who want a lot of open space to work with.

Kesinlikle çok kaliteli. Tavsiye ederim.