Aairhut 4 Pack 13 W/m.K Thermal Pads, 100 x 100 mm 0.5 mm+1 mm+1.5 mm+2 mm Silicone Cooling Pad Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop PS4

Great product. Bought the version with 4 different thickness and applied to old gtx 1660 super. Card was bad enough to be crashing a system in under one minute into gaming, worked like a charm, even managed to fix a design flaw with 2 vram being half outside the heatsink area, stacked up 2 different thickness pads. It's very easy to apply and easy to cut to the right size it's also very flexible so even if u apply 02-0.3 above what used to be there it still works flawlessly. Used up around 1/3 of the size, it's more than enough to use on 2 different GPUs, doing 7900xtx next I'm confident there is enough left. Temps went down by 15 degrees on vram even with lower fan speed so it helped with lowering noise levels of card. Size 5/5 Design 5/5 Fit 5/5 Performance 5/5 Value for the money 4.5/5 Totally recommend

These lads worked great in my PS2 Slim. The old ones were all dried up so it was great to be able to replace them with some decent quality ones. Immediately dropped temps and the console runs much more quietly now. They are a little pricey but well worth it! Buy these ones! Hope this helps

Used both 1.5mm and 2mm sheets to re-do my RTX 3080 since it has not been done and wanted to see better temps when gaming. Very easy to work with just using scissors so not needed to have an exacto knife. Saw a drop of almost 20 degrees Celsius especially on memory hotspots so clearly does work much better than stock pads that Nvidia had fitted.

Served their purpose, bit brittle tho hence 4 star

Purchased for the Apple Neo mod. No fan in them and the chip gets very hot. Youtube loads of videos on this very simple mod to aid cooling. A few tiny screws to remove and a pair of scissors needed.

If you are an XPS9710 owner and you are looking to replace the thermal pads on your SSD’s, the 0.5mm pad worked great on mine lowering the temps by 3 degrees at idle compared to the stock dell cooling pads, just make sure to remove all trace of the original pads and clean with isopropyl before applying the new pads, highly recommended!

Good price and perfect thermal pads Thats everything what you need. I will stay here no point pay extra for the name only. They are same like big name pads. Also you will get more then need

After installing these on my 3090ti, I was able to see 15+ degrees cooler temp during gaming or intensive tasks. Before I used to get around 75-84 Celsius under heavy gaming but with these new ones installed I get around 60-70 Celsius when gaming. These temperatures are impeccable considering I have overclocked the card and play almost all my games at 4K Ultra. Only thing is that it may be a little more expensive but you definitely get what you pay for.

Producto de muy alta calidad. Lo he usado en una GTX1080 y realmente he conseguido bajar las temperaturas que actualmente registraba en la VGA. Lo recomiendo encarecidamente. Por contra es si precio pero lo bueno suele costar caro pero a favor conseguimos mejores prestaciones en nuestros componentes electrónicos.

Best

Très bonne qualité extrêmement pratique facile à appliquer Conduction thermique au top Plusieurs épaisseurs donc s'adaptent facilement à plusieurs types d'utilisation

Dopo aver sistemato il die con la pasta, ho voluto fare le cose fatte bene e ho cambiato anche i pad termici sulle VRAM con questi di Aairhut da 13 W/mK. Ragazzi, la differenza è netta: prima le memorie scottavano e arrivavo a una media di 86°C, mentre ora dopo il cambio sono sceso a 71.8°C medi. Parliamo di quasi 15 gradi in meno, il che è tantissimo per la stabilità della scheda, specialmente sotto sforzo o durante sessioni di gioco lunghe. Sono facili da tagliare e applicare, hanno un'ottima aderenza e si vede che la conducibilità termica dichiarata è reale. Se avete una scheda che scalda lato memorie, questi pad sono la soluzione definitiva

Seems to work as intended with a lower price than "name brand" thermal sheets such as Thermal Grizzly etc. There is no way to verify the stated thermal conductivity and the sheets arrived in a no-name box and the sheets in a clear plastic bag. The sheets or plastic bag does not come with any description of manufacturer or thickness. It is useful to use calipers when replacing thermal pads on ie a graphics card. Measure what size/sizes you need and cut pieces from sheets as needed. Stackable. Used when replacing thermal pads on a Gigabyte RX5700XT. Combined with Arctix MX-6 for the GPU. Also updated graphics card firmware to increase fan curve from 39% to 59%. (under heavy load) firmware available on Gigabyte website. All this combined revived a card that shutdown because of thermal issues (GPU hotspot 110C). Temperatues lowered to around 90C and the card does no longer shutdown or throttle because of overheating. Also, screws must be tightened kind of hard (not extreme but slightly uncomfortably) to press together the GPU, backplate etc with enough force to make sure it is a tight fit for the thermal pads and paste to work as intended. Unknown longevity of the thermal pads, working as intended for the time being...