Flexible Quarter Round Molding Self Adhesive (White, 19.7 Ft) Peel and Stick Flexible Corner Molding Trim Caulk Strip for Ceiling, Molding, Wall Corner, Tile Edge, Countertop Cabinet Edge

Had to install windows in curved opening. Used this on the curves. Matched it to straight pieces at the hardware store. No problem using nails to fasten then matching up to straight pieces. Came out great. Not sure about adhesion, but bot worried since I nailed it in place.

This looks good once put down, but it is a pain to get it to bend around curves against a steel bathtub if the product is cold and the applying surface is also. It just needs to be done on a warm day or heat the actual quarter round so it is more flexible/bend more easily. The adhesive is really good so don't pull much of the protector off at one time as the stuff grabs everything. On straight runs it stays on perfectly but in some severe curves it may need some sort of pressure device to keep it in place until it sets up some. In our case Goop (bought on Amazon) adhesive was used to make sure it stuck well and was water-proofed. I recommend using this product in warm weather (if possible) or if cool/cold heat both the QR and applying surface for some time with a hair dryer until warm. Cuts easily and is the proper size. Looks to be durable and should last a long time. Just take your time. Need flexible quarter round to go around curves this is the Heavy Duty Solid stuff - Just be sure you are using it in a warm enviroment or that both are warm before applying..

While this product is not as good as regular wooden quarter round, I found it perfect for use in my bathroom. No worries about moisture, wipes clean easily, and never have to repaint it. It is super easy to install and pretty forgiving. I would recommend fitting it and practicing placement a few times before peeling off the backing. I have also bought similar products in different styles for trim and edging, and all have stayed in place so far. I do wish this came in a larger size (not lengthwise) as my house is older and some gaps between baseboard and flooring are a bit wider. Plus whoever owned my house prior did a terrible job in one room where they replaced drywall, and there is a large gap at the join of ceiling and wall that this is too narrow to cover. For the price, you can’t beat it. Real wood trim or even the solid PVC kind is so much more expensive.

This item is hard to cut even when using the suggested tool. Adhesive is aggravating to try to work with.

This trim is way too stiff and heavy to work with - especially around any kind of curve. It might work better on a straight flat surface, but I could not get this to stick correctly on a 90 degree angle - toilet to floor. I heated it with a hair dryer and that made it more flexible for a moment, but it would quickly become un-stuck when it went back to its original shape. I used caulking tape that folded and it worked much better! I can't think of an application that this would be good for.

Used in our RV after redoing floors. It looked nice and easy to cut but it doesn't stick very well. Would not recommend in an environment that's gets hot and cold repeatedly.

I just finished remodeling our bathroom by shortening our shower slightly to make room for a freestanding tub. The base of the tub was a bit uneven where it came in contact with the floor, so it needed something to finish the look. My first idea was to buy rigid PVC trim and attempt to heat bend it, which proved to be quite a challenge and did not work out. This product ended up being exactly what was needed. It worked perfectly around the curves of the base and provided the exact look I was wanting. Extremely easy to install… I just made sure the adhesive on the trim had the best surface to adhere to the floor tile and fiberglass tub by wiping them with alcohol first and drying the surface completely. I also ran a very small bead of white silicone on the top edge of the trim after it was installed, to help adhere it as well as fix any tiny gaps the adhesive backing created. Perfect solution!!

Recently added LVP to my walk-in closet area but I don't have a saw to add quarter round. This product saved me! Super easy to put down and looks great! I wish it was a little less glossy but the difference between the baseboard and the quarter round is minimal. I used garden shears to cut the product. Regular scissors are not going to do the job. I added caulk to cover any seams between the baseboard and the quarter round and the product was very easy to add caulk to. I'm very happy with the result!

I love the flexibility of this product. I used it as moulding around the edge of the bottom of a tub that wasn't square. You may need to apply to a stronger adhesive as I did as well as clear caulking, but definitely did what I was hoping it would. Very pleased

Great substitute for conventional quarter round. Excellent in water prone areas. Make sure surfaces are clean and dry before installing

Flexible quarter round for sure, 2 sided tape is really cheap, had to use calking to get to stick to fiberglass.

Exactly what I wanted, worked perfectly, and as described

The adhesive on this moulding is garbage. Using it between vinyl plank flooring and bathtub and it won’t stick to either surface worth a darn.