PASYOU Adjustable Squat Rack Heavy Duty Gym Rack Stand Multi-Function Weight Rack Stand Push up Portable Strength Training Dumbbell Rack power rack

Amazing quality for what it is - easy to put together took me an hour and a half on my own. Really great quality safeties. The j-pegs may not be as trustworthy with heavier lifts as not much of a lip and the plate storage isn’t much use (would be better on the back of the back posts instead) unless smaller plates but a nice touch still very impressed for the price. Seems very sturdy but then I’m not planning on doing my heaviest weights on it so not sure if you’re planning on maxing out lifts on it but for regular workout weights it seems very sturdy

Very well packaged, High quality parts, easy to assemble via instructions. I was very pleased with the look of the rack, and and the stability, and more so the safety features, as it will be used by young members of my family. A quality product, well thought out, extremely well priced. I will be looking for further buy's from this company.

I read the reviews on this some have valid points. Let’s get the negative bits out of way. I marked it down a star not due to one thing but a few minor bits, it came well packaged but it a a tiny crease (probably for manufacturing)& a few tiny paint imperfections.One of the safety bars is also difficult to fit in and the screw heads scratch the frame, so I taped the offenders with electrical tape.I totally get what the other reviewer said about the width of the rack stopping you doing wide grip bench press. The only solution would be to make it adjustable which would affect the solidity of the rack, wider would make it tight to stops on your bar, which could cause other problems . The point about it flexing in another review is because it’s not tied off side to side ( it’s a rack not a cage but I haven’t found this a problem. Good stuff, it goes together easily & a decent spanner is supplied although I used this with my own ratchet spanner for speed.Well packed for delivery including steel packers to protect the cross member lots of bubble rap.With the bigger cross section the whole thing feels solid & other than the minor issues is well made. It’s the perfect height for me but I’m not very tall, if you are 5’9” plus you might find that an issue for squats. Nice and stable when placing the bar back after squatting . The j hooks look good & solid with good looking welds but time will tell on that . I like the weight plate storage but no good for anything over 10kg size if sited flush to a wall.Pleased overall hence 4 stars

Very easy to put together. The manufacturer is so civilised they throw in extra bolts, nuts and screws. Buy, 2 x17mm spanners yourself and the assembly work becomes easier Solid frame and compact. The product desperately needs full 360° wrap-around secure clamps on the mid lateral bars, and the top Olympic bar holders; as these can easily turn outwards; causing the 20kg Olympic bar to tip, on placing the bar back in the rack. See photos: These proposed wrap around clamps would prevent this highly probable tipping. Please implement this feature Mr Manufacturer to create a perfect product. I still don't know what the safety pins do. I think they have no function. ? Please someone correct me and explain what they do and how to use them correctly. Very happy customer. 4 out of 5; if the manufacturers secure the mid arms and squat rack arms with wrap around clamps, then the compact power rack gets 6 out of 5 stars. Manufacturer/Importer please revert

Great power rack, very impressed with how sturdy it is, the holes being numbered do help, easy to assemble, very good for the price of it, Squat rack may be a little too low if you're over 6ft ,im 5ft10 and it's fine

Rack arrived nicely packed and was easy to put together. It is the perfect height and width for my shed space and very stable. I am 5'8" the squat rack is just about right for me but I would advise anyone taller to look at another product as you will have to bend quite a bit to get under the bar. This rack has made a tremendous difference to my training and enabled me to grow in bulk and strength quite comfortably. Also, I am able to use Bands attached to the frame to do numerous other exercises. It is a brilliant piece of equipment. I would urge you to buy one (no I'm not on a bonus, nor do I work for the company lol) I was reluctant to spend the money initially but so glad I did.

Solid, sturdy it's a great rack for the price. Only a minor observation the front supports go up to 7 it would be better if they went up to 9 or 10 as husband says he can't do incline benching to failure he'd crush his chest, but he loves it for flat and decline benching. As he said not a complaint just an observation

As the header saids, you get what the picture shows you, all the measurements they provide are correct to the product. After using it for a month essentially everyday I can say that the frame itself is solid, and well over engineered to ensure that it can handle heavy weights so not too much to complain about, however I do have a few issues that are lacking in the overall design. What I have found is that when setting up for a weight that is over 80kg's on the top setting, the rack will tend to want to tip over when unracking/racking unless you put weights on the base (the slots on the back), as the base itself is hollow (doesn't appear to have any additional thickness compared to the rest of the rack) which is fine as simply putting on lets say 20kg's per 100kg's on the rack offsets this, except when I need to use all my weight to workout. I've managed to deal with this by putting bags of builder sand on the back. Another issue I have ran into is with the j hooks and safety spotters. The j hooks themselves are able to hold the weight as intended, however what I've ran into is that they are very narrow couple that with being tall and I've found reracking the weight after squatting/overhead pressing to be a bit perilous especially when there isn't a safety bracket above the highest pin option, I've managed to deal with this (sort of) by putting the j hook on the second highest option which isn't optimal, I've also ran into this issue while benching and using the smaller positions where there isn't a safety bracket I've instead had to set the safety spotters to the highestposition and drop the weight on them instead of going for a rerack, which feels very sketch. In my mind a simple fix for this would be to just have a piece of metal that slots into the tube and either sits on the j hook inside or 'clips' into place. Then the safety spotters do what they should do, they catch the weight and are well built, again an issue I've ran into is that when setting onto the higher options (positions 8+) for overhead pressing I have had to drop the weight onto them, it wasn't anything much only 50kg's, with one side already in the j hook and dropping it a distance of a couple inches (few cm's) and it had managed to bend the bracing which I found odd, since you'd think the pin and the bracket facing towards me would have taken the force, but aparently not. I wasn't asking anything much off of the safety bumper, only wanted it to catch essentially 25kg (since the otherside was already racked) from a small height, I know it probably wasn't intended to be used outside of the 1-7 positions, but I'm not asking it to catch 100kg's from a a metre in the air. Again another straight forward fix either ensuring the back bracket isn't taking the entire brunt of the force when outside of the 1-7 positions, or even adding smaller safety bumpers meant to go above the 8+ positions. Then last little annoyance, this one is genuinely not that big of an issue but the locked rubber isn't rubber, it's a plastic/resin mix that gets damaged easily when using any amount of serious wieght, however this doesn't bother me as it is essentially aesthatic, just a little dissapointed it isn't actually rubber/silicon. Also I would recommend getting a decent wrench/power tool to put the nuts and caps on as what they provide will leave you swearing, bruised and bleeding. Overall I'd still buy it and use it as it fits the purpose I needed it over a full rack (cheaper by a long shot, easily movable and easy to store in a tarp) and the issues I'm facing with it are mostly due to my height, still would like to see an adiditon of safety bumpers where the plastic clips are as they already send two pieces of scrap metal extra with the rack, I would just hope they'd trade those out for something useable.

El producto está genial solo me faltó un tornillo, pero por todo lo demás genial.

It was simple to assemble. The instructions were really well made. I assembled this with my wife and it took 30 mins. The materials are really sturdy and really high quality for the price. Really happy with the purchase.

It's a great squat rack, mainly because of the safety bars and overall quality. The height should be one hole higher(I'm 1.82m). At the highest position, there is no protection at the back, when the bar is set back in place on the rack after squatting.

My basement will not accommodate a full sized power rack so I opted to buy this gem last year. After roughly a year of using this, I can confidently say that this item is a great item to buy if you have a basement like mine that is too short to accommodate a full sized power rack/squat rack. It handles more than enough weight for a great workout and is a great space saver as you can do multiple exercises on this such as: squats, bench press, raised deadlifts, military shoulder press and if you have resistance bands with attachments, you can string it around to do stuff like seated rows and other exercises with them as well (although I would advise having weight some weights on the provided holders to keep it from giving you a kiss on the forehead), All in all, This is an excellent piece of equipment, I love this thing, I am soooooo Happy I bought it. Don't even get me started with the price. You cannot beat it, and it is lightweight and easy to assemble, I would recommend that you use an actual wrench and a ratchet wrench as the ones they provide are not the best, but you could use them, just a ratchet wrench and wrench combo are better to get it nice and tight. If you buy this, you will be honestly satisfied with your order. This sees so much use at my place, I have put 505lbs of weight on the very top of the rack and it holds like a champ, I have no fear of this thing breaking on me, maybe once I get passed the 600lb mark, but that won't be for a while. It's been about 2 years now, it's still holding strong with heavy use, no signs of wearing out, the j hooks so show wear, but again, heavy use with heavy weight, everything is still holding, no loose padding. Will update yearly. Still love this product, a lot of use and no issues, great quality.

Took me a while to leave a review. The squat rack is soooooo good, since im about 5'3 ft and I typically use low bar, the height is great for me and at first, I thought the width is small but surprisingly it is wide enough for me. So before you buy, make sure to check the dimensions and all. Assembling the rack is not really hard and the needed tools are also included in the box. Kudos to the seller and to the product as well!! Thank you!! A happy customer here!