Pitaka MagEZ Case 4 - Black/Grey(Twill) for iPhone 15 Pro Max, 6.7-inch, Slim & Light, Case-Less Touch Feeling, 600D Aramid Fiber Made, Compatible with MagSafe

This case is awesome. It looks really nice, feels high-quality, and fits my iPhone 15 Pro Max perfectly without being bulky. The material has a really good grip, and the magnet is super strong - it just feels solid. The only thing to be aware of is the screen isn’t super protected - which is what you get when you get a really slim case. As such, the case’s lip is a bit low, so if you use a glass screen protector, it can stick out and get damaged more easily. I’ve had to learn that lesson the hard way. If you’re careful with your phone, this is the best quality slim case I’ve held. Just maybe keep a spare screen protector handy!

I cannot imagine how you could get any slimmer than this case while still actually adding protection to your iPhone. The material is razor thin but still manages to provide protective coverage to the back and corners of the phone. It even has the slightest bit of a raised edge to the corners so you can lay your phone face down on a table. I have a glass screen protector on my phone so I felt like it was almost flush with the table but maybe a hair's width of a gap. Lastly the camera module is surrounded by a raised border that gives protect that as well. The feel in the hand is almost a caseless feeling because the case is so slim. The material of the case has a nice matte finish that gives it a pleasant ever so slightly textured feel. I could see the case possibly getting a bit smudgy with oils from your hands but I didn't notice it happening so far. It would be a bit of a shame because the case is quite stylish if you like the carbon fiber look, which I do. As far as functionality, all of your buttons, camera lenses, speaker grills and ports are going to work flawlessly. The buttons and ports are more or less uncovered, which is great for preserving the tactile clickiness of the buttons and the ability to use any cable with the charging port even if the head of the cable is thick. Also the MagSafe functionality of the phone works perfectly. I tested with several charge stands and car mounts. If I have any gripe about the case it's a minor one that probably won't apply to most people. I hold my phone often with my pinky finger resting against the bottom edge of the phone. Nice there is a slight bit of case coverage across the back bottom edge of the phone but it's mostly uncovered, that little ridge of case feels a bit uncomfortable on my pinky over time. Again, I don't think most people hold their phone that way but I do and if you do also, it might be a slight issue for you. Overall, I can't think of a better ultra slim case on the market. Pitaka has a quality case here.

There are endless options of cases on the internet for iPhones. Let's be honest, most are cheap junk and some are actually quite good and well-made. In my opinion, none rival Pitaka's cases, especially the MagEZ Case 4. It is feather-light, yet offers excellent protection to the iPhone. I've dropped it a fair share of times and have zero iPhone damage to show for it. The 1500D Aramid Fiber that Pitaka uses is very tough even though you wouldn't know it by holding it in your hand. This case is also very grippy, thanks to its aramid fiber design. It helps the Titanium phone to not slip out of your hand easily. I really like the access to buttons and the well-thought-out, precise cutouts on the sides and bottom of the phone. This way you still get to experience the great feel of the phone without rubber/plastic layover button covers. The MagSafe feature of this slim case allows you to make full use of any magnetic charging stands/accessories without worrying about the case interfering with the strong magnetic hold. The wireless charging speed is not affected by this case whatsoever. I have been a Pitaka user for years and I absolutely recommend their cases to anyone who wants the absolute best protection for their phone while maintaining the slimmest profile and a top-notch quality design. Can you buy a cheaper case? Of course. But remember, you get what you pay for. The iPhones are not cheap phones. Protect your investment with a case that your iPhone deserves. There is no case out there that is thinner and lighter while offering this level of quality and protection for your phone.

I just received my iPhone 15 Pro Max, so I knew immediately that I wanted a lightweight and durable case. The PITAKA StarPeak MagEZ Case 4 has an elegant design that is designed with premium Aramid Fiber, which add durability and its very comfortable to hold in hand. The case is extremely slim and lightweight. I tested the wireless charging and it works easily, as well as, with my other MagSafe accessories. Also, the case has a metal raised lip to help protect the camera lenses. Furthermore, I love how slim the case is and it easily fits in my pockets. And I just learned there is an NFC chip built into the case to check the case's authenticity and to access games, wallpapers, music from Pitastudio. The StarPeak design along with the fusion weaving makes the case pop and looks incredible! If you are looking for a functional, durable, and elegant slim case then the PITAKA case is for you. Overall, I love the premium quality and the minimalistic design of the case. I'm happy with my purchase and I love my PITAKA case!

Only reason I gave this four stars was due to the price. While I appreciate the craftsmanship and the weaving technology behind this all, $70 is steep! However, I do love the thinness of this case. For everyone who complains about protection, THIS case is not supposed to offer superb protection! If you want that, get an Otterbox or Mous case. I’ll never understand people who complain about protection with super thin cases. This is meant more for changing the overall look of your phone while offering a slight ease of mind when laying the phone down on a surface, NOT protection from a fall. Anyways, I do love the textured feel of the fibers as well. This is my first aramid fiber case and I love the fact that I can still enjoy the “true” size of the iPhone. I do wish they had different options for the camera bump, like a silver/gray to match the white titanium iPhone. The MagSafe magnet is really strong also. I use a PopSocket and PopWallet, and it definitely takes more effort than I originally thought to get them off. That is definitely a plus! Access to the USB port and buttons are easy since the openings are simply, well, open. Definitely subjective, but I do like that they’re open so the sides of the iPhone shows rather than being enclosed all around. At that point, there’s almost no point in choosing a specific iPhone color since most cases cover/hide the side borders. Weighing ~17 grams, this case is amazing at how much it offers and the engineering behind it all!

I'm super impressed with my new Pitaka case. I have a iPhone 15 Pro Max. I usually buy a Spigen case every time but wanted something prettier and thinner. First things first, the thinness of this case is phenomental. It adds practically no bulk to the phone. The design on the back – it's just fantastic. It has this modern, sophisticated look that really enhances the phone's appearance, making it stand out in the best way possible. (Keep in mind that if you have a light colored phone color, then it will be pretty obvious where the cutouts are. My friend has this case but in a darker phone color and the cutouts are much more subtle.) Moving on to the build quality – it's top-notch. The case feels solid and durable in my hands. Plus, the material they've used is surprisingly grippy. This is a huge plus for me since it reduces the chances of the phone slipping out of my hand. That being said, it's less grippy when set on surfaces— so beware it might slide away on a wet bathroom counter. The primary downside is that this case is almost impossible to take off and put back on. It requires a bit of effort and patience, which can be a bit frustrating, especially if you need to do this frequently. The phone comes with an explainer card on how to remove it which also includes a QR code to a video— so this is definitely a known thing. Honestly, it's a bit of a struggle. It usually takes me a whopping four minutes to get this case off. That's a lot of time spent just trying to remove a phone case... For instance, I used to have this routine where I'd take my phone out of its case as soon as I got home. It was a way to use a "smaller" phone at home when I don't need a protective case. It also gave me a chance to clean both the phone and the case regularly. But with this Pitaka case, that routine has become practically impossible. The effort and time it takes to remove the case mean I've pretty much stopped doing this altogether. Don't get me wrong – once the case is on, it's fantastic in every other aspect. And if you don't need to remove it regularly, it'll be great! Overall, super pleased with the thin size and beautiful design.

I had this same case for my 14 Pro Max and loved it so I decided to go back to the well for my 15 Pro Max. Bad idea. The first case I was sent was obviously for a 14 Pro Max. It had the wrong Pitaka branding on the back of the case and didn’t fit the 15 PM at all. The packaging said “iPhone 15 6.7p” so that was right. At first I thought this was almost certainly a customer scam through Amazon but buying from PitakaDirect I would have expected someone to overlook returns. However, that case looked brand new and unused and was in the packaging correctly so I wonder what happened there? I requested a replacement, of course. This time I get the case in and luckily it was the right model with the updated branding but it already had a smudge on the bottom right corner.. like it had been handled already.. not a huge deal but concerning. I go to slide it on my phone and I hear a crunching sound like the case is struggling to snap onto the phone. I finally get it on there and it’s nothing like my 14 PM experience with Pitaka. There is no lip around the front of the case to protect the screen, unlike the 14 PM design. Deal breaker. It’s also on so tight I can barely pry it off and get a fingernail under the corner to lift on the way-too-tight corners. Again, this is the opposite of the 14 PM case I had; that one fit perfectly and had a lip to protect the screen. So here I am again having to send this back again and leave a bad review. I’m thinking this was also a customer return based on the smudging and the fact the case simply doesn’t fit right. A $60 case should be better than this. Full stop. Pitaka, your quality control is a mess and needs to be fixed before anyone drops $60 on your case.

I've been using PITAKA cases since the iPhone XS, long before Magsafe was a thing and wireless charging was just getting started. Their iPhone cases are top quality products, and as with all my previous PITAKA iPhone cases, this one is no exception. While I haven't subjected this one to the kind of abuse my previous cases had to endure, the build quality is the exact same, if not better. While the case is extremely thin, it's also incredibly robust. I've never had to replace a PITAKA case due to damage. If you really treat them hard, they'll begin to show signs of wear, but you really have to be hard on them. Even then I've never found a beaten up PITAKA to protect my phone any less. All corners are protected, the camera frame has a lip around it prevent the camera from resting directly on surfaces. The only drawback being it can be hard to clean lint off the camera without taking the case out of the phone, which is only a problem if you carry your phone in your linty pockets. I suggest taking the phone out of it's case to clean occasionally anyway, it's a case after all and not a space suit, lint, dirt, and grease will get under it. It can be a little hard to pry off, but read/keep the instructions the case came with so you remember how, and it's not so hard. There is also just enough of a lip around the edge of the screen so that the display is never resting directly on a flat surface, even with a screen protector on the phone. That said, if it's a particularly rough surface like pavement, well, you'll need something more like OtterBox for that. On that note, if you want all around incredibly thorough "fool-proof" protection, this isn't the case for you. It's sleek and sexy and extremely robust for being as slim as it is, but think of it more like a business suit made of kevlar and full blown knight armor: looks good while providing a reasonable amount of protection vs. looking kind of ridiculous but capable of being run over by a pickup truck. My only real gripe with the case is that they're expensive. You shouldn't need to replace the case if you replace your phone every 2-3 years, though if you're particularly rough on yours, you might want to (even if not need to), but $50-$70 for a case is a lot to ask. To me, the balance of aesthetics, function, and protection are worth it, but it's definitely an investment. TL;DR: If you want a beautiful case that provides about as much protection you can get with a slim barely visible case, this is the case for you.