NoCry Safety Face Shield Mask for Work with Premium Anti Fog and Anti Scratch Technology — Durable ANSI Z87.1 Certified Grinding Face Shield with Extreme Impact Resistance

I needed this to protect me from flying debris while using my Drexel tool. I had been using safety glasses previously, but it was quickly apparent that I needed more serious protection.This was perfect for working on my projects, even though metal wires came flying at my face my eyes and face were perfectly protected. This was 10000% worth the money I spent to prevent myself from blindness. I like that the face shield clicks into place easily but securely. I did have to watch the install video to make sure I was installing the face shield properly. There should not be a gap between the goggles and the face shield when it is installed properly. I was also able to wear my prescription glasses beneath the goggles very comfortably.

I purchased this face mask to use with a chipper/shredder. It fit neatly over my glasses and there was room under it for a dust mask without the face mask and dust mask rubbing against each other. I did not have to make it overly tight for it to stay in position and it is comfortable to wear for extended periods. It fit securely enough that It did not come loose when I bent over to pick up branches from the ground. My hearing protectors fit on at the same time without any problem. Like any face mask it occasionally gets condensation on the lens, even with a dust mask on. It was a minor inconvenience and I have never found a mask that didn't fog up. I also used the mask this winter during a windy storm while snow blowing and it was extremely helpful. I will also use it in the woodshop as it is better than a pair of goggles because it covers more of the face when using power saws, sanders, the lathe, etc.

Ordered two of these for my Fiancé and I. 1 night each week we have to do a cleanup and spray out these ketchup coolers that are like big radiators with 200+ plates needing sprayed off. So it’s about a 2-2.5 hour job with continuous wear. Anyway they just started making us wear these goofy face shields and the ones they gave us were garbage and fogged up within minutes with how hot it is on the floor and they weren’t compatible with her glasses. So after seeing a review with a guy wearing this in a hot shower I bought them instantly.So far there’s absolutely no fog. In my case, as a 6’0 215lb guy it fits perfectly. The eye window is huge and I can kind of move it up or down to change the orientation & where my nose actually sits and find it breathes better when I have the mask sit higher but the breathability with the vent open honestly isn’t too bad. It was absolute torture wearing the thick ones they provided but with this? I really didn’t mind too much. The only annoyance I found was with the adjustable strap, I have to wear it with a cap and the plastic clip on the strap can be tricky to get under the bump camp supports that rest on the back of your head. My girl just straight wrapped it around the back of the helmet so I guess there’s always that option but I don’t care to do it like that.In her case, so far.. as a 115lb 5’4 female.. almost a tad big for her face she said but keyword almost, looked like it still sealed fine to me. Also still a bit tricky to wear with her glasses.. she ended up taking them off and going half blind for the last quarter of the 2 hour job where we really needed to see. They fit ALOT better than the ones we had before but the issue was her glasses kept fogging up and I think it was because the glasses didn’t entirely fit. They fit INSIDE but the lenses rested against her glasses a bit and didnt allow much of a seal, causing her breath to come up into the goggles and fog the glasses but.. with glasses it’s kind of impossible to get a great seal with any pair. I think she just needs to get anti fog lenses or some kind of a spray for them and it’s not a fault of the protector.Scratch resistance I’m not sure on.. after the job I wiped them clean with a paper towel and when shined against the light I could definitely start to see the very fine superficial scratch marks from the towel. I’d imagine they’re about as resistant as a regular pair of safety glasses.. so whatever is normal.. nothing to write about. I’ll couple the frost coating with this as well, it’s kind of odd and seems to show finger prints/markings. I’ve already had thoughts of just spray painting the shield at some point to black or white.Quality & material.. these are pretty nice, and do feel quality. A number of coworkers asked about them and said they do look nicer (than what we were provided) Well made. Like if you rated quality by store there would be Dollar general, Walmart, Target & then special order/professional level. I’d call these Target quality. Is it $35 worth of quality? I’d say it’s like RIGHT there at the top of the acceptable range… pushing it.. but still acceptable. The material is of a thicker plastic, like a polycarbonate. You’d struggle to actually break these.The only other thing of note that I’m not sure on but is worth mentioning. The face shield does sit very close to your face. My nose was pretty much inside the vent pocket and I felt it form around my mouth/jaw area. If I tried to talk at all it felt kind of funny. Any other kind of combo like this that I have tried before rested off-face or hung in a way where it didn’t touch my face but it’s tolerable.

These are a very nice safety glasses/face shield setup. I particularly like it because the eye protection fits very comfortably over my regular glasses with no pinch or squishing them into my face. The eye protection also has a comfortable rubber seal that seals nicely to my face which is a great feature as I got these to do wood turning, if you do any turning you know you get tons of wood in your face. The removable face shield is also pretty good, has good coverage & is unobtrusive. I only wish it had a slightly tighter fit to the glasses. I do like how the face shield & glasses are separate which keeps them from fogging up. Good adjustable head band. I defiantly think I will get another for doing other types of work, like under the truck or chainsawing.

These fit great and have very good seal around eyes. I bought a few others that were disappointing. I will buy these again : )

We have a large yard to mow and in high pollen season, having a pair of goggles that are tight enough to block pollen, but do not fog is mandatory. We have tried countless goggles that claim to be anti-fog and never met that expectation. These goggles are comfortable, adjustable and truly anti-fog!! We have tried them in hot, humid conditions and they not only kept the pollen out but were crystal clear at the end of the job. The face mask is great for weed-eating work. Note: the mask is only for protection, it does not keep anything out (pollen, fumes, etc.) It clips easily into the goggle and sits far enough from the face to not be irritanting. We will definitely buy more of these!

Quality is good! Doesn't fog at all.

Eye shield was great! Did not help with nose and face shield. Particles blew upward into my nose and mouth. Was disappointed using. Decided to use a N95 face mask for nose and mouth protection. This mask and the eye protection work great.

Muy completa y resistente