Danco 12063 Curved Replacement Handle with Front Angle/Side/Vertical Mount in Toilet Tank Lever, Chrome

Installing was easy. It feels like a well made product and flushes nicely. Attractive product and matches well with the other fixtures. Affordable upgrades for your bathroom.

It took me a little bit to figure out how to install on my flush box. Once installed, it feels like a real expensive handle. Operates smoothly, Heavy duty feel. Very nice looking.

I swapped in the Danco 12052 toilet tank lever in matte black, and I’m pretty happy with it. It fits well, looks sleek against my black hardware, and flushes just as strong as before. The install was simple — just a few twists and it was in. If you’ve got a standard tank, this one’s a nice upgrade.

I purchased to try to resolve an old failing toilet I have been trying to repair for a long time. Can you say "years". After buying the usual hardware store pieces of junk that range in the $5 to 13 dollar range. I thought I would take the plunge (no pun intended) and try one last time to repair this old relic. Well I guess I still have faith in my fellow engineers. This item although a bit difficult to install or maybe I should say adjust and tweak. Anyway I'm a 60 Yr. old with lots of hand on work and trade finally got it in and adjusted after around 1.5 Hours. The last 1/2 hour was spent adjusting the ball chain to the most effective length. For what it's worth, wire ties work the best on the chain ends to make it so the chain ends don't move around creating issues with the ball ending up in the same place to seal the hole in the tank. But then, that's another write up, smile. This is simply one of the best flush handle and levers I have ever seen. It will more than likely outlast me let alone the toilet. Very well engineered as it only takes a very light pressure to make it work. Not like the others that one has to almost stand on to get a flush. Highly recommended by geek types like myself. As I said, if you can manage to withstand the small issues with installing it, you will be forever very happy like me. Heck, I had to write this review after a few days of use. I don't review stuff unless they are either really great or stink. So, bottom line. Really great item! Pros - Very easy to flush, Actually has a square collar that fits my tanks square hole. Nothing like trying to put a square peg in a round hole. Real Chrome Finish, REAL Brass Lever, Absolutely NO Plastic anywhere..... Built like brick you know what, hey that's why we're looking at these right? CONS- The only one I can find is it is a bit hard to install. But if I can do it, so can you. Heck in another review for this item I believe a 78 yr old woman did it too. Buy this and live with happy toilet flushing forever.

Easy to install directions are very clear quality is high heavy in the hand and not plasticity feeling. Bought a second one for my other toilet.

I love this handle, so far. I will amend my review if I find issues. I already replaced the tank innards. But it came with a flimsy plastic arm, which I expected, when I ordered this to replace it. The flapper that comes with the innards that I purchased is pretty heavy. I think this is why my handle doesn’t stay in the flush position, that other reviewers complain about. I also bought the white handle. Half of the white handle is plastic. I noticed the reviews who complained about handle:arm balance had purchased the metal version, which may be heavier, and adding to the weight discrepancies. If this was to occur, I was prepared to hang a bag of nuts and bolts on the arm with a zip tie. But it hasn’t come to that yet. So I assembled the handle, and thankfully I hadn’t tightened that nut, because the arm assembly has to be attached after the handle is attached. I didn’t have octopus arms to reach around to screw the wing nut into the screw, and my fingers aren’t quite as nimble as they once were. So I had to force the handle down to raise the arm to be able to see and screw the wing nut. When people use the phrase, “This screws!”, this is really what they’re talking about. I hate screws!!! But I regress. Once I managed to screw on the wing nut, I tightened that and the handle with pliers. I know you should hand-tighten toilet fixtures, but I have very little muscle strength. My first flush kept running. I attached the chain in a way that the flapper got caught on the chain’s hook that was attached to the arm. This occurred because the arm is much longer than what was supplied with the innards, and I forgot to test it. So I repositioned the chain closer to the handle and wrapped the extension around the arm and back on the hook. I flushed, the tank filled and stopped. Easy peasy, bumble beesy! I got the white handle and it looks really cute on my commode. It sticks out like a sore thumb, but that’s the design on the tank; nothing I can do. Besides, it’s still cute. I’m looking forward to my next flush. I’m sure the novelty will eventually wear off, and life will return to normal with things breaking down around me; but until it does, I’m enjoying the flush! I do recommend the white handle. And in case you’re wondering, I do not know the people who sold this to me; and I did not accept a reward for my review (but I will accept a PayPal donation 😁).

Anyone wondering if this will work in a Mansfield flush valve? Yes - it does! I've had trouble with this toilet since I bought the house 2 years ago - chain kept popping off. Did some research and discovered you're not supposed to use a chain - you need an arm long enough to slip through the hole of the loop on the flush valve. And you can't just get any replacement - it needs to be long enough. This did the job. My first time attempting any kind of a fix like this and it was easy (hardest part was putting the nut on - ended up holding it still and using a Phillips head on the screw). I did have to reverse the arm from the picture as it was keeping the float from moving, but it does not hit the ceramic front. It works perfectly. This is a HIGH QUALITY product that will last. The handle is solid and beautiful. The arm is not plastic, it is sturdy metal. I just love to flush it now - the handle goes down gently and the returns slowly. No more tripping up, no more chains to break and no more cheap handles. I was able to do this job in under 15 minutes and I've never worked on plumbing before - new home owner. So proud of myself!!!

Love my new toilet handle- matches my new tub and sink faucets and such a great price!!

Very happy with this product, install did not take long, very straightforward. Our old one was peeling and looked like garbage, this new one looks great on our toilet and does the job.

Lo acabo de poner, las instrucciones no son muy claras de entender pero se instaló muy fácil!

Great replacement toilet flush, a quick fix to up date your toilet system

Easy to install, work perfectly !