Rocaris 8 Pack Wood Plug Cutter Drill Bit Set, 1/4 Inch Hex Shank, Black | 1/4", 5/8", 3/8", 1/2" Straight and Tapered Taper Cutting

Plugs cut out nicely, but went up one more drill size to fit. Very happy with this though!

Did a quick test of all 8 pieces on some dimensional pine lumber. Using the slowest speed on the drill press, and taking it slow, they cut well. Marked with SAE units, they are a bit off in their dimensions, especially the smaller ones. Relatively low cost, so I was not expecting much better. Should work fine for my needs.

Working in a table and wanted to plug the screw holes with matching grain. It took a little time to get used to them and some testing for the hole sizes but once you understand how to keep it from bouncing around. But the sharpness is good and I had no issues.

Super low quality, and worst of all, the plugs they create are significantly smaller than the listed diameter, so all in all this entire set was 100% useless.

Es un buen momento pero es muy importante

Seem to be tapered so the bit is incredibly difficult to extract after drilling a pin. The pin itself is also very difficult to extract from the bit and I lost about half of them as they either shot across the room once they came loose or broke in the process.

Worked perfect, a must have for wood workers

Great at lighting tinder not so much as a plug cutter. Needed tool to cut oak plugs for a timber framing project so didn’t need furniture quality stuff; and it still missed the mark. 1. Slow, slow , slow; struggled to cut the oak at all and a pine practice piece still took almost a minute. 2. Cutter was so dull oak was smoking dangerously enough I took it outside to continue. 3. Finished plug was pretty rough, again dull cutter even in the drill press. End result was I got a plug, but since the point of finishing with a plug is a cleaner look, this is unsuitable.