ETS Speed Loader for Glock Magazines 9mm 40 SW and More CAM Gen II

I bought this for my glock 19 and can load 30 rounds into a 33rd mag in about 6 seconds flat. It's incredible how much this opens up your range time. Other speed loaders do make loading single rounds fairly effortless and this DOES STILL TAKE EFFORT. Forcing 10 rounds against a spring is going to work, fellas. There is a learning curve on HOW and where EXACTLY to apply the pressure, and it IS going to suck on brand new mag springs.... I'm not "strong" but I wouldn't expect a small woman to really be able to utilize this. If mine somehow broke, I would replace it immediately. I want to maximize time spent shooting vs reloading and this is a range bag staple. An UpLULA or something may take less "work" per individual round and if you've got a disability or arthritis or something, that may be more appropriate. If you're trying to load 9mm mags as quickly as humanly possible, this is your stop. It specifically says it will not work with a sig p365, and maybe it doesn't do those 10 rounders well...I can say with certainty that it works great on a sig p365x 12 rounder. EDIT: I regret to inform the 3 people that will ever read this, that it no longer works on my p365x mags. If it ain't broke, don't fix it... I applied a bit of oil to see if I could get it to run any smoother (I lightly lubed it as recommended when I got it) and ruined a good thing. It still functions beautifully for glock mags but a fully depressed plunger now only seats around 4 in the mag and the rest fall out upon removal EDIT 2: I am thrilled to announce that we are back working on p365x mags. I go to the range like 1-2x a week and this actually improves my life. It is now working smoother than ever on my glock mags and fills my p365x mags like a charm. I will never clean and lube this thing again. EDIT 3: This is basically a diary that no one will ever read, but I got the magguts +2 for my 12 round XL mag and replaced the spring and not only do I get an extra 2 rounds in the mag for virtually no change in size, this speed loader now works like butter on the 365x/xl mag. It's still outrageously fast and easy on the glock mags. Can I get an affiliate code fr? Every time I go to the range I have people walk up and ask about it. I let them know it's pretty universal for doublestack 9s, let them try it with their mag, they take a picture of the logo and prance off. Holla at me, ETS

I waited until I used it a few times to express my opinion. It works as advertised, load up to ten rounds at a time, just refill the cartridge slide and keep going till the mag is full. If you have never used a speed loader before, be aware that the amount of pressure required to operate is very substantial. I’m 6’4, 250 lbs, big hands and it is a two handed operation for me. I find that bracing the bottom of the mag against my body helps stability and control. The last few rounds when loading a mag to capacity feels crunchy and sounds stressed, just push it on in, it will handle it. When shooting targets, I will under load the mag, 10 rounds in a 15 round mag, to greatly speed up the loading process and significantly reduce the pressure needed to load quickly. The mag fit in the loading well is very tight, but that is a good thing, it’s not something that you want rattling around. I give it a solid heel of the palm to ensure it’s seated fully. For the price, this is a very solid performer.

This ETS Speed Loader (CAM Gen II) for Glock magazines works really well and is very fast when it likes your ammo. It loads 9mm and .40 S&W quickly and smoothly on compatible rounds. The problem is it’s very picky — some ammo brands feed perfectly, while others don’t work well at all no matter what you try. You’ll need to do some trial and error to figure out which ones play nice with it. Overall, when it works it’s excellent and much faster than loading by hand, but the inconsistency across different ammo brands keeps it from being a 5-star tool.

Updated 3/5/2025: I hoped with use over time that this would work better. It does NOT. It works somewhat for the first 10 rounds, but don't expect to get the other 5 in using this. I have lubricated it as directed and suggested. Repeated use does not prove to break it in either. This is my replacement as I sent the first one back. I will find something else. This is my 3rd speed loader for the 9mm/.40 cal. magazines. I gave one as a gift to my daughter and kept the other for me. The first two were well beyond the 30-day return period, but supposedly have a lifetime guarantee. I had just opened my second one of the first order and it simply will not properly load a Glock 22 Gen 5 magazines (my service weapon). No matter the lubrication, it just sometimes loads 5 rounds and then it's done. It does a better job on my Sigs magazines. This latest order, it does do better on the Glock mags and does fine on Sigs. I imagine that all of the company's demo videos are performed with well used and broken-in speed loaders. I plan on reaching out to the company. These are fantastic when they work. I have two for my AR's and they work well. It is such a relief on the fingers and thumbs. These work best when pressed down on hard surfaces. If you use your abdomen, you're much better off if you are wearing body armor. They are quick, when they work right. I had to load them from the box at only 5 rounds at a time or the lip on the bottom stops it from picking up the tenth round when trying 10 at once.

Works well with Ruger 9mm mags. Made well.

It seems like it's really hit or miss in using this to load your magazines. I've seen reviews on all ends of the spectrum where these work perfectly fine to load your magazines, and other reviews and experiences like mine where it's nearly impossible to do so. I immediately had issues when trying to pick these up from my ammo boxes like the way they do in their videos. I think the reason I had issues with this was because my ammo boxes have a little bit of play in them where the cartridges sit, so the second one cartridge would get on the lip and turn even a little bit, it would jam up before allowing any other cartridges to slide on. This could easily be fixed if they added a steel or any metallic guide rail along where you slide the cartridges, but unfortunately they went with a plastic design to keep costs down and it immediately showed. So fine, I just had to load the 10 rounds onto the rail by hand. However, I was running into issues when trying to load my magazines that I think was caused by the same lack of metallic rails for the cartridges to slide along. The second I'd start pushing down with the plastic plate to push them into the magazine, they would jam up after just one or two cartridges were fed. What's worse is that when I would remove the magazine to try and remove the stuck cartridges, it was almost harder to get them cartridges out than anything. Of course, this could all be caused by the way my magazines are shaped, but I ran into the same issue almost every time. If I was able to successfully fill a magazine, it would take so much force against the loader that even holding it against my hip to brace it would hurt after one or two attempts. I stopped trying to hold it against my chest or stomach after just a few times of it hurting pretty badly with the amount of force I had to apply. One thing to note is that I was using flat point bullets when trying to load these, as that's what I shoot for USPSA. It seemed a little bit easier using round nose bullets to load a magazine, but I was probably only successful maybe 5-10 times trying to use this in the last couple of weeks. For that reason, I only took 2 stars from overall review, simply because it doesn't meet my needs but may work for others. I would suggest this to people only if they wanted to take the chance that it may not work for their magazines. If ETS ever decides to improve the design with some metallic guide rails, I might give it a try again, but this didn't work for me this time around and I chose to return it.

Follow directions, oil before using! It takes practice! It’s plastic and a cheap price! So don’t expect it to be amazing! I used on shadow system mags, Glock mags! CZ mags, so far all worked great! Worked good with 9mm blazers(FMJ) Didn’t work that good with Winchester (FMJ) but still worked some what! Works really good with defense ammunition! Like critical defense and sig Sauer (V-crown). Probably cheaper rounds will not work that good with, but who knows. I noticed when you load mag in first, (tap in good until it clicks good) and then load ammo on slide rail and then I use my hip bone to rest end of mag, keep pressure on mag! and then put the top slide piece on! The best thing I learned when loading ammo into mag, (final part) is to use a good amount of momentum and commit to the push all the way down until both pieces are flush. If you stop or hesitate at all it makes it harder! Try not to pinch your hand in between both pieces when sliding ammo into mag! A lot of times it will miss the last two or three rounds. It Takes practice tho! It works and it doesn’t work! But it’s something easy and nice to have at the range! and it’s definitely worth buying! Gave 5 start’s because it’s worth it for the price! I think if slide rails and some components were made with better materials it could be a game changer when it comes to quick loaders. Hopefully this helps somewhat.

The first thing I want to highlight is the excellent customer service provided by Elite Tactical Group. I saw an advertisement for their Speed ​​Loaders online and decided to purchase one. When I initially did my research, I noticed that my Walther P99 AS did not appear on the list of compatible firearms. Consequently, I called customer service to inquire further. The representative who kindly assisted me explained that, while my specific pistol was not on the list, I could order a unit with complete confidence; if it turned out not to be compatible, they would refund my money. I decided to purchase my speed loader through Amazon to take advantage of the benefits offered by that platform. I received my speed loader, and—sure enough—it works perfectly with my P99 AS. The ease and speed with which one can load a magazine using this device are truly incredible. An excellent product backed by excellent customer service. I highly recommend it.

Work super well for CZ-75 magazine. (A 9mm pistol) You will be able to shoot more bullet at the range. You don't need to spend extra money for magazine. Realy easy to reload. Works amezing when your ammo is on a tray like Federal Ammunition. In canada its perfect, becose many of those ammo tray have 10 bullet in row, so, you don't need to grab more then a row for each magazine. I srongly recomend this product.

geht prima

I have the item for which this is a "knock off", and I am very impressed. It loads CZ and Glock very well, but is a little less smooth with SIG 9mm. It like Blazer brass, but some bulk ammunition (Remington) has feed issues. Not that it is the angle of the flange at the head of the cartridge that makes a difference, and the "lips" of the magazine. Over all, it is virtually identical to the much more expensive model. Both models require lubrication for optimum performance. (I use "barrel butter", as a light grease seems to last longer than oil.)

Top

Works fairly well. Seems to get better the more you use it