Deck Plus Wood Screws, #8 x 1-5/8in, 5lb Box, 735 Pieces, Tan | Epoxy-coated steel, Star/torx drive with T25 bit, Self-drilling for decking, fencing, and treated lumber applications

Just as good as the more expensive ones in the stores. Good quality and better price than the big stores. I'd buy again.

These are well machined and finished deck screws with features not found in other products in this category. Before you decide if these are the best screws for your project, it is important to understand the benefits of these various features. Starting at the top you will notice the star or “torx” drive feature. One can reasonably assume that 6 point on the star is more than 4 points on a Phillips screwdriver, therefore, because more is better, the torx will outperform its ancestor. However, the truly radical element of this design is the nearly total lack of taper on the bit. A Phillips screwdriver bit is virtually designed to climb out of its matching recess because of the way it tapers to a point. The walls of a torx recess are nearly perpendicular to the face of the screw. This allows for dramatically more torque to be transferred to the screw without risk if slipping. Since you want the screw to make the hole in the wood and not your screwgun bit, this will be an important benefit. Unless you are looking for it, you may miss the next feature, located just on the other side of the countersink screw head. On a standard wood screw, the angled surface is ground smooth, because it is expected you will drive a preliminary pilot hole near the same size and shape as the screw it will receive. If you drive a normal wood screw with just a screw gun and no pilot whole, the screw will sit slightly proud of the surface, because there is no room for the cone of metal. The screw is just compressing the wood out of its way much the same way as a nail would. On these Hillman brand screws, the angled surface of the head features six sharply raised ridges or nibs. As the screw is driven home, these nibs scrape out the wood to provide a matching recess so the screw can sink to even or if desired below the surface. The shaft features an aggressive thread pattern which will firmly hold your project together. Because it is finished with a protective coating reminiscent of Teflon, these screws drive in easily. That job is made even easier thanks to the self drilling tip which is the last features of this superior simple machine. It is this last feature, the self drilling tip that requires a word of warning. This item is a screw, not a miracle. The shaft of the screw is not designed to pull wood up out of the hole. Therefore, it you are driving these onto the end a a board, you will still need to drive a pilot hole. It need not be countersunk, but you can't drive a wedge into the end of a board and not expect it to split. I received nothing in return for this positive review. I rely on Amazon reviews all the time. This is my way of paying forward, and a small effort to reward a company for a job well done.

These are great screws for any outside wood project. I got these to replace 12 feet of 6 foot fence panels and they work great. The 2.5 length is perfect because a 3 inch pokes through the fence

Maybe it’s too early for a review as I used these to rebuild/repair my garden beds which are simply pressure treated 2 x 6’s in a rectangular pattern x 12 - we shall see 5 years from now if they hold up. I must admit I bought them on sale and they were less expensive than Home Depot or Lowe’s in a similar type - however they seemed just fine and I have no complaints- I think I will order again if needed whether they are on sale or not. Oh one more thing- they came in a very handy plastic case instead of a cardboard box - bad news is that plastic case got broken in transit- oh well- I almost complained but did not - the screws were a OK.

Good screws , missing Torc bit Keg listed on label 25 lbs. 12 1/2 pounds only. Amazon sent another box, still NO torc bit. Called mfr. they said (Amazon problem)

great product arrived on time

Very strong. Sharp to look at with that deep green that resonates well with me. Great strength for holding wood in place, and the screw heads are strong too, driving the screws in with ease. Buy these in bulk for people who like to build stuff, you cannot get a big enough container of these screws as a gift (space permitting!), because the enable the power to build!

These are very high quality wood screws

Great Fasteners

Resistentes y muy buen agarre!

Bon produit. Coloris original.

Good quality and great price !

Good quality and strong wood screws, no any complaints.