Case for iPhone 6 and iPhone 6s, Non-Yellowing Shockproof Phone Bumper Cover, Anti-Scratch Clear Back (Clear)

Definitely the best minimalist case I have found for both the iPhone 6 and iPhone 6+. I bought this case ahead of time of receiving my iPhone and have been using it since. I love that the case is made of TPU which is like this smooth plastic, not the hard plastic that most other cases are made out of. The material just makes the case feel good in the hand. It doesn't just look good either, it's very durable. I dropped my phone on cement, from about waist height, with the case and I only received a minor ding to the top corner of the case and absolutely no damage to my phone itself. The case is so good in fact that I have bought more than 5 of these for both the normal 6 and 6+ for family and friends, in various colors and they all have nothing but good things to say about the case as well. The combination of the price and quality of the product makes this a no brainer. Do not hesitate to buy this, especially if you're weary of the brand. Speaking of the brand of JETech, I would like to take a second to speak about their customer service. Like I previously mentioned I ordered several cases of different colors for family and friends and one of them, I purchased the clear case for my brother, since his iPhone 6 is silver. After a couple of weeks the case started to discolor and turn yellow (the same color I have seen similar cases of similar color turn after some time). Knowing that it was way past Amazon's 30 day return policy and I contacted the seller via email and told them what happened and the responded quickly and asked for a photo of the discolored case and after sending the photo to them, they immediately said they would email be sending me a new case, no questions asked. I appreciated their ability to handle the situation, especially since I responded with asking whether they could send me the black color of the case, since I have had much better success and knowing that the clear case would probably discolor again in the future. I wasn't expect much from my request, but all they said was to send the Amazon link to the case I wanted and they would send it. And they did! After a few days of receiving their email, that they have mailed the replacement it was at my door. Great customer service! Thank you JETech for your effort and you have earned a loyal customer for the future. Do not hesitate to purchase from JETech! Update 12/4/15: So after a little bit of time, in the replacement case they sent me, the plastic back started to separate from the rubber bumper part and after contacting JETech they were more than happy to provide me with a replacement. Another A+ from their customer service. I also received the case within 3 days from corresponding with their customer service department, which is great! The only thing I want to mention is that the replacement I received wasn't quite the same as the original case I first purchased. I think this may have something to do with the recent release of the 6s, maybe? Anyways the difference I noticed form the previous case and the replacement are as follows: the parts of the case the cover the button are a lot harder and more plastic feeling, which I don't particularly like, however it's not too bad. Also there seems to be more of a lip that's suppose to protect the screen when you lie to face down, which is interesting since I thought the lip the original had was just fine and seems like the case is a like bulkier, but very minimally. Also there doesn't seem to be a the logo stamp on the back of the case, which is cool. None of these differences make the case worse, especially for the same price, so it's not worth changing my original score. It's still a great case if you're looking for something minimal and you can't beat the price. And again the customer service of JETech is top notch.

This has been the best case for me to use with my iPhone. It was purchased September 14, 2014 so there is about 9 months of wear. Of the several I tried this case felt the best in my hand. Not too slippery, never felt it would fall out of my hand but it was smooth enough to slide along when needed. It slides out of pockets easily. This has been a great case. Given great protection from the occasional drops and iPhone falls. It feels good in your hands and overlaps the front to give the screen clearance from a table top. To me it seems to be the slightest case, not adding much bulk to the iphone. The band around the side of the case is flexible and seems a bit thicker to help absorb the bumps and falls. The band also covers the volume and off buttons on the sides so they protrude out a bit more. The case will let some dirt in the back so you need to keep an eye out and clean it when needed. If you do not the dirt will scratch the back of the phone. The case is marketed as clear and it is still pretty clear. It has a rigid plastic back and a softer side band. The side band also overlaps the back so it keeps the camera lens and back of the case off the table. The charging hole for the Apple cable is sized for that: the Apple cable. Larger head sizes on 3rd party cables may not fit, however, the case slides on and off easy enough to bypass this problem. One problem is the logo. In the picture below, the top picture shows the phone with the case, showing the logo. The bottom half shows the phone without the case but just below the print on the iPhone. It is transferring to the back case of the phone. I used a soft plastic pen cap and rubbed the logo off the back of the phone. Then I took an swiss army knife and scratched the logo off off the inside of the case. If you want good protection and don't mind scratching off the logo and living with a few scratches you might make on the case, this is the case for you.

This is a review of the JETech iPhone6s case, crystal clear. In a nutshell, I really like this case. It's 1/4 the cost of similar cases that I saw in Verizon store but equal in quality. It goes on my phone very easily yet once it's on, there is no way it will accidentally come off. The "naked" iPhone6s feels very slippery in my hand. It's so thin compared to my 5s that I'm always feeling like it's going to slip right out of my hand. This case solves that problem. With this case on my phone, I no longer feel like it is slippery. It's also very thin and minimalistic. It has a bit of a lip around the entire edge on back and front which is great because if your phone does drop and lands screen side down, the screen will be more protected because of the lip. I also like the entire edge of the phone is covered by the case since it wraps around the edge all the way around. I've had other cases on my 5s that left either the top, bottom or both edges open and thus prone to getting scratches, nicks etc. This case doesn't let that happen. The cutouts are pretty accurate although the camera lens cutout is not absolutely precise. However it does not affect picture taking in any way, so it's no big deal. I'm miffed by the reviews that say this case caused scratches on the back of their phone. I think any case will allow little particles to work their way in and to the back of the case, but if you take the case off once in a while and wipe off the case and phone, this should not occur. As for the crystal clear case becoming cloudy or discolored after some time... Hey, it's a $6 case... I don't expect it to last forever. This is a nice minimalistic case that provides good grip on the phone and it's working for me really well.

General details: I'm using this case with a space gray iPhone 6s. The case forms a bumper around the edges with a raised edge on the front and on the back. This allows me to place my phone face up or face down on a table without the screen or back touching. The back has a clear solid sheet recessed from the edges for added protection (its a full case not just a bumper). When first using this case I couldn't tell which side was the front of my device when it was in my pocket because the back plastic is as slick as the screen of my device, and the raised edge is on front and back. However, I learned the back edge reaches a little further around, or I can touch device buttons to be sure its orientation. Pros: Clear back for visibility of the iPhone. Seems durable and good protection. Stays on tight (not too tight, may fit loose on the older 6?). The bumper edge makes the device easy to grasp and hold (not to slick). $10! The raised bumper on the back means the clear back of the case is recessed toward the device. I attached a metal plate to the back of my phone for use with a magnetic mount in my car. In my old Apple leather case my phone would seesaw around when I put it on a table because it rested on the metal plate I had attached. With this case, the bumper edge means my device sits flat on the table on the bumper. Cons: The bumper edge is noticeable and thick, and while the entire case is clear, the bumper edge, being thicker, creates an opaque halo around the device when viewed from the front (see photos). This makes the device seem bigger and creates a noticeable border around the screen. For those who want to see the device and have the case "disappear", this one doesn't. Other cases such as my previous Apple black leather, and my friend's smoke gray plastic case, which is similar in design to Apple's, blend in better; they are less of a bumper with a back, and more like the Apple leather case with one continuous piece from front edge all the way around. The front raised edge of bumper-like cases such as this one have some impact on the "3D swipe to switch apps" feature of iOS 9, but can be worked around (same issue as Apple's leather case). Finally, all of the buttons are covered by raised plastic "buttons" (vs. being cut out for direct access to the devices buttons). They're smooth and rounded on the edges, but this again has the effect of making the device seem bigger. They're all good quality, and some people may prefer this for added protection. I may break them out which looks like it should be easy to do. So many cases seem over priced. This case is simple, seems a very good deal, offers full case protection, and the cons are relatively minor and mostly subjective. I'm planning to attach photos taken purposely in bright sunlight which will emphasize the "halo" of the bumper edges.

iPhone cases are one of those things that it's incredibly easy to overpay for. This one is basically all the things I was looking for, none of the things I wasn't, and it's cheap. Pros: - Slim: it adds very little bulk in any dimension. The case projects JUST enough from front and back to keep the glass lens or screen from touching a flat surface that the case is touching. - Unobtrusive: nothing changes about the operation of your phone. No need to open up any little flaps to get to the Lightning port or the headphone jack, no problems operating any of the buttons or the ringer mute. Your iPhone still looks like an iPhone from the back, so people know you're cool. ;) - Protective: the plastic is pretty hard stuff, with just enough flex to allow you to get it on the device and to allow you to press the buttons. It's also got a good compromise between grippiness (so you don't drop it) and slickness (so it doesn't grab the insides of your pocket). You would have to get pretty unlucky for a fall to damage your screen, although this is not one of the armored brutes that guarantee *nothing* can hurt the phone. The fit on the phone is very tight, so I think that an impact would have to be very severe to jar the phone loose enough to travel the extra half millimeter or so to get to the concrete and retain enough force to break Gorilla Glass. And because the fit is so tight, I don't think grit is likely to get in and scratch the aluminum, either.

Good quality/serves the purpose well.

The case itself is a favorite out of my collection of clear cases. I like it better than my Tech21 clear case and another clear case from a discounted retail store. The case itself is very clear unlike some frosty clear cases and has a crystal clear backing that isn’t a soft tpu type material like some, it resembles that of acrylic. It has a sleek, clear design that forms to the hand well and doesn’t give an obnoxious thickness around the edge of the phone. It fits well if you keep maybe a folded 20$ bill (US Dollars) or a wallet size photo. If you use a magnet phone mount in your car, the magnet that sticks to your phone won’t buldge out of the back or bend the backing in any way. Although the case may seem to be a little too soft around on the buttons of the phone or where there are cutouts but it does make it very easy to press or access them. As well as the durability goes, I don’t drop my phone often on hard surfaces like tile, hardwood, or cement, usually throw it onto a bed or carpeted floors and sometimes the occastional table or desk, it holds up well. I really enjoy this case and the way it looks and feels. It’s a must cop if you want to protect your phone but also show off the phone itself.

I bought this very cheap. All I wanted to do was to give it a bit of protection as I'm pretty good with my iPhone. When I got it it did seem very lacking in protection. But once I fitted it on my phone I thought it fit it fine. It wraps around the phone & extends beyond the face, which gives it some protection. I also get to see the beauty of the phone as it is see-through so I can see the Rosegold and the rest of the phone which is beautiful. I threw in some tiny stars of various colors in the case before fitting it on the phone and it decorates it nicely. When I bought the phone I saw the protection covers which cost over $40 plus & made the phone so heavy and thick. I just felt that the initial phone that was made by Apple was so beautiful and this cover just keeps that beauty showing. It was cut perfectly for my 6s. I gave it three stars as I'm really not sure how well it will protect. I've dropped it 2x with no problem. If it continues to protect I'll know where to get my next case & will give it a higher score.

持ちやすく、耐久性もいいです。 長く使えそうです。 それなのに、リーズナブルな価格で大満足です！

Great fit

The fitment is good, product looks durable and has a nice touch. I chose the black variant because full transparency from other brands became in sooner than one year yellow.

superb quality n very precise fitting n charming case

落下純正にコーナーからの衝撃に強い変色もあまり無い。 ストラップ用の穴が2ヶ所あるが細いので使用中にワイヤーが切れてしまうので改善が必要。プレート式のストラップホルダーを追加購入しました。 #配達のトラブルで他の棟の同じ部屋番号の メーターBOXに入れられていたので探し回って見つけた。同じ外観のマンションが複数あるので置き配時に棟番号を確認して投函して欲しい。