King&Charles Cabinet Hardware Jig&Auto Center Punch&Point Drill Bits

I recently tackled a kitchen renovation project where I needed to install new handles and pulls on over 20 cabinets and drawers. As a first-time DIYer, I was worried about getting the holes perfectly aligned, but this King&Charles Cabinet Hardware Jig made the entire process a breeze! The jig is built from sturdy aircraft-grade aluminum, which feels premium and durable right out of the box. What really sets it apart is the included automatic center punch – it eliminates any shaking or slipping when marking your spots, so you avoid those frustrating mistakes from direct drilling with an electric drill. The point drill bits are sharp and precise, and the adjustable design works flawlessly for various handle sizes and spacings, whether on doors, drawers, or even custom wood pieces. Setup took less than a minute, and I had consistent, professional-looking results every time. It saved me hours of measuring and re-measuring, and everything lined up perfectly. No more uneven hardware! At around $10, it's an incredible value – way better than hiring a pro for this step. If you're updating your cabinets or doing any woodworking that involves knobs and pulls, do yourself a favor and grab this jig. Highly recommended!

I've built kitchen cabinets, bathroom cabinets, dressing room cabinets, and quality cabinets for every room in the house that needed new cabinets. But I always dreaded installing pulls. It's just not fun and a 1/16" error just ruins the cabinet doors and drawers. Sure, I've made simple jigs for drilling the holes precisely, but they were never really precise. UNTIL NOW I expected a commercial jig to cost much more, but Amazon has 'em. And the cheapest (under $10) is really high quality in a $10 tool. I had reservations but bought anyway. I could hardly wait for mine to arrive so I could use it. The kitchen in our new home has all factory-made expensive cherry cabinets. They're quite beautiful. But the installer failed to install two cabinet door handles . . . the ones over the ovens. So I found and purchased two new handles here on Amazon. They matched the rest of the cabinetry handles perfectly. But I didn't want to drill holes in the two cabinet doors by simply measuring and marking or taking the time to make my own 1-time jig like I used to do. So I searched Amazon and found this kit. When it arrived, within 20 minutes I had the two cabinet handles installed to perfection! No wallowing out the holes to get them to fit. Perfect alignment has been achieved first try! I'm thrilled! The ABS parts keeps metal from touching the finished woodwork. No scratches or mars anywhere; and accurate? Absolutely! I don't know how they could design, manufacture, package, and ship this kit for under $10. I'm so thrilled that I might just buy another couple to give away as presents to my like-minded friends. YES. Even if you only have one pair of cabinet doors or pulls to install, get this kit.

Excellent tool. Makes installation of handles fast and simple. Great price especially for DIY if you just to do one kitchen

This King & Charles cabinet jig is a handy tool, especially when you're tackling a whole kitchen's worth of hardware like I was for my daughter. Aligning drawer pulls and cabinet handles can be a real headache, but this jig makes it a lot easier. The automatic hole punch is a nice touch, saves a lot of time and prevents those annoying pilot holes that wander. Now, here's the thing, and it's important: you absolutely HAVE to double, and triple check the jig's alignment every single time you move it. It's very easy to bump it or have it shift slightly, and if you're not paying attention, you'll end up with misaligned handles. I learned this the hard way on a couple of drawers. I recommend, if possible, start (aka practice) with drawers or doors that are less visible, but that depends on your kitchen layout. Take your time, be meticulous, and you'll be fine. Overall, it made the job much faster and more accurate than eyeballing it. Just remember that alignment is key. Four stars because it could be a little more robust, but it gets the job done.

This is a great tool. Easy to set up and use. Love the punch that comes with it.

I was and Charles cabinet hardware gig and auto center punch kit with drilled bits and was amazed at the quality of the product at the price point, which was under $13. I saw many other kits of this type with prices varying up to $40 that I don’t think were any better built. I’m extremely satisfied with quality and longevity that I can expect to get with this kit.

The King&Charles Cabinet Hardware Jig set is an essential tool to install cabiinet and drawer pulls. We were replacing knobs with pulls, so I chose a pull that came with a backing plate. We installed pulls on drawers first. It took a few minutes to assemble jig for 5" oc placement on drawers. Most of our drawers are too wide to use left side stop. I simply centered jig on center mark. The hole punch was one of the best tools in the set. The new, properly sized drill bits were appreciated. Measure each drawer pull against hole punch marks — there was a slight variation in o.c. spacing in the 25 pull sets. Follow directions and you will have a successful installation

This cabinet hardware jig made installing handles and knobs on the kitchen and bathroom cabinets in our new home so easy! With the hardware we purchased also, it saved us over $1400 vs. what the builder wanted to include and install handles and knobs.

Se ven de buen material solo falta usarlo para ver la resistencia del material.

Cuts down handle/knob installation time! Very precise adjustments. Comes with everything you need! 100% recommend!

Worked perfectly to line up and drill 20 handles in my kitchen. Once set it didn't move. The hole punch works a treat too, just insert in the hole and press down and it hammers a mark for you to drill through.

Good quality and nice bag to keep everything together.

Excellent bit of kit. I did 15 new cupboard doors and 4 drawer fronts. All fitted perfectly. Couldn’t have done it without this kit. The punch marker was invaluable and it also included drill bits.