TRQ Front CV Axle Shaft Assembly Set

Hooked up nicely and comes with a new pin.

The fitment was perfection, all hardware was included. The build quality mimics OEM. This was an excellent value.

Fits like a glove feels good, it removed the knocking when turning i think my CVs where worn but still okay i just saw the boot ripped and it had some play so decided to change it, also after really looking at it it looks refurbished, great hob tho so far it feels good on my car tho i recommend getting for budget replacement.

Bought two new CV axles from them for my 05 (05-2010) Jeep Grand Cherokee Laredo 4x4. On said vehicle I was rebuilding the entire front anew, which included these axles. Built the passengers side first, took a good day and a half of a work day. Was in no hurry to jump on drivers side immediately; waited just over a week. After said time, lifted and jack stands in place…began the lengthy disassemble of drivers side. Some ten steps later, made it to where needed to hammer out old cv axle. Wasn’t easy, tried many different angles to get a good solid hit on it. During one of those angles under the rig, I noticed grease splatter in numerous locations of the passenger side. Discovered the issue was the inner boot of the new TRQ (not) cv axle. Was quite bummed:( Contacted the company and included pictures and my purchase invoice. Was replied to promptly, that was good. Their compensation was that they sent me two new cv axles, that was kinda ok seeing how I’d not even installed the second one; yet it’s also awful…as the amount of work to redo it is not the most fun. I was told “no need to send the faulty part back”. Installed the drivers side, got a good right alignment on it and had the Jeep feeling good. Had driven it perhaps five different days since repair. Today, I was under the Jeep in order to put some new grease nipple inserts into a couple ball joints; and:( discovered now the drivers side outer boot split and spewing grease:( Unfortunately am unable to give a 0 star rating here. Do not buy this part from them for an 05-2010 Jeep Grand Cherokee. Untrustworthy, unreliable and poor quality.

I was very satisfied with this dual front CV axle. The quality felt solid and well made, and it fit perfectly with no issues during installation. After installation, the vehicle drove smoothly with no vibrations or noise, even during turns. It completely restored proper handling and eliminated the clicking and shaking I was experiencing. Unfortunately, snowy weather later destroyed my car, but up until that point, the CV axle worked great and performed exactly as expected—especially compared to the price my dealership wanted. Overall, it was a reliable replacement and an excellent value for the cost.

Installed these and they’ve worked great with no issues so far. I drive a lot of dirt roads with washboards, and after roughly 800 miles, I haven’t noticed any problems. The seals are thick and made of quality material that looks like it’ll last a long time—no grease seeping through the edges. The thread on the main hub was clean and undamaged, and it even comes with a new nut. Everything went on easily, and although they fit a little looser compared to the originals, they’ve held up great. Overall, excellent seal and thread quality, very durable, and easy to install. Installed on a 2016 Ram 1500.

Mazda6 2008. Excelent performance. Item seems to be brand spanking new, tight joints and sturdy construction, the right specs and fitment as per my mechanic. Thanks TRQ. Way better product than Detroit Axle

Update: I had to change this from a 1 star review to a 5 star review. Yes the 1st set of CV axles leaked out (driver side axle) , and so did the replacemrnt set (this time the passenger side axle)...but I reached out to them and told them I really did not want to do another replacement set but due to hard times I have to. And with that, they sent a third replacemnt set to me overnight. I was blown away by that. And this time around, I will be spending $15 on some flex seal and spring up that clamp on the inner side of the inner boot where grease always tends to fly out of at some point no matter what brand CV axles you buy. All and all, I am really great full to see this company stand behind their product for an issue that they really don't have any control of since no matter how tight they tighten that clamp down; the physics of how fast these axles spins will eventually squeeze through that seal. Original Review: Tell me why I ordered these 8 months ago and I just checked the comments to see that these CV axles failing in 8 months is very common...!!!...I noticed 6 months ago that grease was coming out on both sides of the CV boot on the driver side axle where the clamps on the boot are. This means that the clamps were loosely clamped down. My passenger side boot fidnt have this issue at all and my dumb self assumed that the grease I saw was gonna form a grease clot and prevent more grease from coming out but that wasn't the case...as now 8 months later my driver side cv axle is making terrible noises when I turn and even when going straight down the highway. I see that TRQ has some kind of warranty so I'm about to go to their website and see what can be done

Semble de bonne qualité et instruction facile reste à voir la durée de vie 🤞👍

Good quality and fit perfectly on forester SJ 2015

كشكل ومضمون يبدو ان خامته وجودته ممتازه لكن للاسف لا يوافق سيارة ميركوري ميلان مديل2010 محرك6سرندل واتمنى التوضيح او تغير او حذفه من موقعه بانه موافق سيارة ميركوري ميلان مديل 2010 سعة المحرك6سرندل (انتظرت كثيرآ وبالتالي لا يوافق مركبتي وهذا في غاية السوء) وزاد السؤ سوء الى الان لم يتم اسنرداد مبلغي المالي