F2 Master Mini Cordless Rotary Tool Kit, NeoPulse Motor, 5 Speed, Revostor Hub, 35 Accessories, Engraving Pen, for 3D Printer Sanding, Polishing, Drilling, Carving, DIY Crafts, Grey

One of the best purchases that I’ve made. Everything about this is seamless and high quality. Easy to charge and all the pieces fit in magnetized holder that spins. (Magical) And it works perfectly, chiseling, shaping and drilling holes in ceramic and wood. Leveled up my creativity and so easy to use. You won’t regret this purchase.

I replaced an ancient Dremel mini tool with this – impressive quality and the best part absolutely intuitive to use without even reading any instructions. Very clever storage design.

I use it for my Ray-Ban glasses, and it works great. Compact, easy to use, and good quality.

This is not a Dremel, let's get this out of the way first. If you go into buying this thinking it's going to be a Dremel replacement you will be sad. This is a good engraving tool and tool to carve for a little while. It's pretty low torque. So you aren't going to be able to grind the rust off your car with it, but you can buff and polish a model car. It's a light weight engraving tool with enough power to carve into plastic, soft metals, and wood and it'll do that for a moderate period of time. I'm using mine for carving into plastic, wood, and aluminum for printing. It does the job I need. The speeds available give me good control but if you are accustomed to Dremel speed, it feels slower than my Dremel. I'm not trying to work super fast with this so this works for me. It feels okay in terms of durability but I don't know about the bits, they feel like they aren't as durable as dremel bits, but I'll find out more over time. One good thing is that changing out bits is VERY easy and fast. It uses two grippy knurled nuts at the attachment point. I did find that in some cases this didn't grip the bits quite strong enough and some wandered out as I worked. The bits can also loosen during use. Annoyingly this means shutting the whole thing down as it doesn't cycle through 0 when you cycle through the speeds. So every time I go to change a bit or tighten a bit I have to turn it off and it has to cycle through the set up cycle- this is pretty annoying. Swapping out collets is easy as changing a bit. Value wise... I like the number of bits it arrives with , it can't use all bits so look close at any replacements you buy. There are 2 collets included which opens up use of other bits. It uses old style wheel attachments which work but are also not as secure and easy to use as the new Dremel locking style. Overall I like this for what it is- a light weight easy to use hobbyist engraving tool that can handle some light carving.

Preface: I got this tool on a sale and using a discount code from a sponsored Youtube creator, so that obviously may affect biases in the review, however the tool is still quite good. I needed a new rotary tool as my old one is having issues with its power delivery or motor failing, and happened to see this one sponsored in a Youtube video, thought maybe it was kind of gimmicky, but to hell with it, I need a new one. But to my absolute surprise, this thing is an amazing compact rotary tool kit. I work with small electronics projects and some sculpture art type stuff, and having a tool this robust and with storage this compact is fantastic. I use a type of cheap IKEA rolling drawers as a tool chest for my computer and hobby tools, and most rotary tool kits I've seen, their cases and such can't fit the height clearance, but this can very easily laid sideways. I LOVE the little ring light at the front of the tool as well, I didn't even notice it had it when I ordered it! The sturdy aluminum construction also feels great to handle and work with. I don't know how well it'd work on anything too sturdy since the design obviously means there's a limit to the motor's size.

Using this thing makes me feel like Harry Potter if he swapped his wand for a rotary tool. I mainly use it for finishing and detailing my 3D prints, and it has completely changed the final result. What used to look just okay now looks polished and intentional, like something I’m actually proud to put on a shelf. The tool selection is great. There’s a bit for sanding, polishing, carving, and drilling, and they’re easy to swap out. I especially like being able to adjust the speed depending on what I’m working on. Lower speeds for fine detail and higher speeds when I need to clean things up quickly. That control makes a big difference on printed parts. Battery life has been solid so far. I can get through multiple projects without needing to recharge, and it holds power consistently instead of fading halfway through a job. Ergonomics are also a win. It’s comfortable to hold, well balanced, and doesn’t feel awkward even during longer sessions. Overall, this tool took my prints from “this is fine” to “wow, this actually looks finished.” If you do any kind of 3D printing, crafting, or detailed hobby work, this feels like one of those tools you didn’t know you needed until you used it.

This is not a cheap tool. Quality feel right from the start. Amazingingly packaged with bits self stored in the case. Tool feels light but strong. Even includes a charging cable. Not a tool I use everyday, but I feel like I could if needed. Very impressive thoughtful design. Touch spot to turn on. touch or swipe spot to change speed. Holds that speed very well. Very quiet. Smooth as butter when using. Impressive value.

It is missing some key accessories in my opinion though. Like a soft polishing wheel or brush just to shine up edges without fear of gouging into them. Sanding wheels of large diameters. One problem I've had several times now is that the bit will become loose and even begin to slowly pull out of the end of the device as it's being used. I have tightened the bit repeatedly to be sure they don't come loose but once in a while one somehow still does and then I have to turn it off and tighten it down again, all of which seems dangerous. When the bit loosens it also causes the entire unit to vibrate and torque in your hand. Something that I find annoying in the design is that when you twist the On/Off indicator to on, rather than starting at level 1 (slowest) the unit skips to level 3 and then I have to press the button three more times to get it to cycle down to the slow speed I need usually for my projects. This is annoying and is an issue every time I turn it on. Why not just start at 1? Finally, the On/Off indicator vibrates all of the time making a loud sound that suggests the thing is poorly made or that the end is about to fall off although it is secure. It simply is poorly designed and vibrates when used often. Finally, the holder for the entire set looks cool but it's another poorly designed element. You cannot remove the unit and the set of accessories at once together. you first have to push down on the top which automatically releases the unit which pops out of the holder of the accessories which then itself finally releases from the case. The unit easily and often pops out of the case accidentally when anything gently presses it. If you own this you know the case is a nightmare and poorly designed. Looks great but when you try to use it you find the case is very unpredictable and is likely to actually lead to damaging your unit because it will accidentally release it onto the floor or a table. When it isn't rattling or vibrating or becoming unsafe in my hands it's been very useful.

Très bon produit, léger et maniable. Large choix d’outils. Seule bémol, pas de témoin de charge. On est prévenu seulement au moment où il n’a plus de batterie. Pas moyen de le vérifier avant.

Bellissimo, piccolo, maneggevole, buona coppia, che dire stra soddisfatto... Ho provato ad incidere dei bicchieri e sono venuti benissimo. Anche mio figlio si e divertito, ora abbiamo tutti i bicchieri da caffè disegnati 😬😂 Poi e comodo perché lo puoi portare in giro magari per scolpire dei legni o delle pietre. La batteria, non saprei che dire, l ho caricato quando mi e arrivato, con le robe che ho fatto non si e ancora scaricato, quindi direi ottima

Das Fanttik F2 Master hat mich positiv überrascht. Trotz seiner kompakten Größe bietet das Multifunktionswerkzeug erstaunlich viel Leistung und eignet sich hervorragend für 3D-Druck-Nachbearbeitung, Gravieren, Schleifen, Polieren, Bohren und feine Bastelarbeiten. Der NeoPulse-Motor läuft ruhig und kraftvoll, und die 5 Geschwindigkeitsstufen ermöglichen eine präzise Anpassung an verschiedene Materialien und Anwendungen. Mit bis zu 25.000 U/min steht ausreichend Leistung für detailreiche Arbeiten zur Verfügung. Besonders praktisch sind die 35 mitgelieferten Zubehörteile, sodass man direkt loslegen kann. Der Akku hält erfreulich lange durch, und das Werkzeug liegt dank seines geringen Gewichts sehr angenehm in der Hand. Für die Nachbearbeitung von 3D-Drucken, das Entgraten von PETG- oder PLA-Teilen sowie kleinere Modellbau- und Elektronikprojekte ist das Gerät ideal geeignet. Fazit: Ein hochwertiges, vielseitiges und leistungsstarkes Akku-Multifunktionswerkzeug mit umfangreichem Zubehör. Perfekt für Maker, Modellbauer, 3D-Druck-Enthusiasten und Heimwerker. Klare Kaufempfehlung!

これは素晴らしい。 今まで、Doremelのルーター（有線タイプ）でなんでも使ってましたが、ケースは巨大だし、設置も面倒でした。 しかし、Fanttikの充電式ルーターを買って、世界が変わりました。力はもちろん有線AC電源に比べると落ちます。しかしそれでも十分な仕事はいくらでもあります。工具においては、大は小を兼ねないないと実感しています。手軽です。回転精度は問題ないです。 丁寧な日本語マニュアルが付属しています。収納が楽できちんとしています。ビットが行方不明になることがなくなりました。モーターがブラシレスなのも気に入っています（ドレメルはブラシタイプなので保守が必要です）。なお、ビットの径は2.4mm固定なのでご注意ください。

Great item for hobbyists, it comes with a ton of bits for grinding, engraving and polishing, great for anyone who does a little kit bashing or taking sharp edges off projects. Its battery life leaves a little to be desired. could do with being upgraded to a battery above 1000 mAh. The bits are capable of working on a variety of materials including wood, glass, plastic and ceramic. The flashlight on the front is very handy, making it easy to light up those dark areas of your projects. This is truly a fantastic tool. For any hobbyists out there.