USX Mount Full Motion TV Wall Mount for Most 42-90 inch Flat Screen/LED/4K, TV Mount Bracket Dual Swivel Articulating Tilt 6 Arms, Max 16" Wood Studs, VESA 600x400mm, Holds up to 132lbs

Great product it's simple and well thought out durable design for easy of installation and string holds up to 165lbs got it for my 75" multiple adjustability and easy tilt feature Again great by for the price

These are fantastic mounts. The ability to have my TV out over foot from the wall so that I can work on it without having to take it out is clutch. It uses a standard size screw to mount into the wall, height wise. It's got a smaller footprint than some of the other types of mounts that you might see, so it fits anywhere and at any height you need it to.. It has the ability to tilt in any direction you need it to to fit your room. Installation was really easy. Just takes a little bit of putting things together, but the final product is sturdy and works perfectly.

I have to say, this was one of the most well-thought-out products I've ever purchased. The item arrived well packaged in a sturdy box (inside another Amazon box) with everything well laid out inside. All of the fasteners were individually packaged so there's no fishing around for the right part. For the record, I used this to mount a 65" TV that weighs about 50 lbs. It is definitely sturdy and can hold much more. Additional tools you will need: Tape measure, stud-finder, drill w/drill and screwdriver bits, wrench & socket set (SAE). Mounting on the wall was a breeze. My advice to other buyers that you will need to locate the wall studs accurately and you will need drill the pilot holes as close to the center of the studs as possible - particularly if you're mounting a heavy TV. There's just no getting around that. Use the "stud-finder" to mark the edges of the studs, then use those marks to determine the mid-point. Make a couple of passes to be absolutely sure. Included in the package is a peal-and-stick cardboard template and two bubble levels. Don't bother with the one that you're supposed to stick on the template, just use the big plastic one. You're going to want to do some measuring here to make sure you place the mount exactly where you want it. I was lucky that the center of the TV was almost dead-center between two studs. You'll also want to measure the height of the mount by test-fitting the part that goes on the TV and doing a little figuring on how much to move the mount up or down so that the TV is where you want it. Once you've drilled the holes, screw the bracket to the wall and use a wrench to snug the screws tight. Don't over-tighten or you'll strip out the holes. Make sure you put the mount right side up (Yes, I made this mistake). Next, attach the brackets to the TV. The kit comes with an assortment of screws, washers and bushings to accommodate any TV. Each TV is different and you're just going to have to use common sense. Don't over-tighten these screws either, but the brackets need to be snug. Before hanging the TV on the wall mount, ensure that the side-to-side and front-to-back tilt adjustment screws are tight and relatively level. You can adjust them later to get them perfect, but you should have them close to where they need to be now and tightened down so the mount doesn't move when you're trying to hang the TV on it. Have someone help you lift the TV onto the wall mount. It just hangs on there (at first), but it's much easier if you have someone to help guide it into place. Attach the locking brackets to the bottom of the TV brackets and you're done!!! Operation of the mount is very smooth, though it takes just a little bit more effort than I'd like. I attribute that to the fact that it's brand new and I'm certain a few drops of oil strategically placed will resolve that. BY NO MEANS would I suggest getting a different mount based on that purely-subjective opinion. This mount is perfect for a big TV. It's a little pricier than most, but worth every penny. Read less

My husband and I recently purchased our new home back in August of 2025, and since then have been working on multiple renovations project. The USX mount was exactly what we needed to complete our electric-fireplace bump out project! There are multiple pieces to assemble but the quality of the TV mount itself is unmatched when it comes to the price point. Due to our short ceilings we had to mount our 75” TV pretty close to the ceiling, having the ability to tilt the mount has helped prevent neck strain! I wish that the mount itself extended out farther, but ours is mounted in a tricky spot that doesn’t leave much room for the TV itself to tilt left and right. If we would’ve mounted it farther it would’ve had a better range. It would be perfect on a flat wall for optimal viewing. Hanging the TV itself was incredibly easy, even with how large our TV is. The mount has secure “teeth” that you just need to hang that brackets off, then tightening the screws. If we’re ever in the market for another mount, we’ll definitely be going with USX!

The mount is well made. The installation instructions are pretty thorough and the installation is straightforward and easy. I am very happy with this product. I liked it enough to buy a second one.I would REALLY REALLY REALLY like to give it 5 stars. Unfortunately, I have to dock it a star. I made the mistake of starting to install the mount without making sure that all of its parts were in the box. Alas... I was close to finishing the installation when I discovered that a needed part was nowhere to be found. Not the best time for this to happen, half of it was already bolted to the wall. Disappointed? Yes. But these things happen. Things can slip through the QA cracks. As long as their customer service can rectify the situation, I'm still a happy customer. I look through the documents in the box for the customer service information. Turns out that I was 20 minutes past the hours that they were open to take phone calls. But they did have an email address! Yay me! I sent them a quick email about the missing part, and figured that at the earliest that I would get a reply from them would be the next day or more likely many days later. To my surprise, an hour or so later, they emailed me back requesting some more info 😀. It only took a couple of emails and they agreed to send a new part. At this point, I'm a super happy camper. Everything was handled by customer service in one evening. KUDOS to the people in the customer service department! The next day, I decided to order another of the same mount for another TV. After all, I like the mount, and I was impressed with how their customer service responded to my problem. That day I also received a notice that a shipping label was produced to ship my part! Again, yay for me! Here's where they loose the star. I received the 2nd mount that I ordered that same day! I made sure that it included all the parts that it was supposed to have, and it did. So I took the part that I needed, and used it to finish installing the 1st mount. Set the 2nd mount aside and waited for the replacement part to come in so that I could install the 2nd mount. So far, I'm happy as a clam. But then it took nearly TWO WEEKS for the part to leave the shipper! I have no way of knowing whether it was their shipping department or USPS dropped the ball at this point. A miscommunication between the shipper and USPS, or something else. What I do know is that the shipping department didn't feel the need to let me know that there would be a delay. If not for me ordering a 2nd mount and it arriving very quickly, I would have been stuck with having half of a TV mount bolted to my living room wall and my TV sitting on my couch. That would have blown monkey nuts. Quality of TV mount: 5 stars Customer service: 5 stars Whoever in their shipping department that took nearly 2 weeks to send the part: not 5 stars and the employees in customer service should mock him or her. I would only dock them a half star, but there's no option for that. If I need a 3rd TV mount, I will buy it from them.

Very well built and durable metal wall mount. Very adjustable, good size that fits a lot of tvs without taking up a ton of space. Easy to install, but takes two people to do it properly in a good amount of time. The size, adjustability, and material makes it versatile, able to fit many tvs in many spaces. Tilt is adjustable too.

I installed this mount for my 67" flat and am very impressed with it. Very sturdy, easy to install, following the easy to read directions. I am more impressed with the smooth tilt and overall movement aspect of this mount. The TV can be moved in and out and angled with one finger...I recommend this mount with 5 stars.

I donated this to a local animal rescue facility here in central Texas. Every month they give free classes about different wild life and what to do if you find one in need of help. The TV in their classroom was sitting on a folded table before and hard to see. With this mount, they were able to put in high on the wall and now everyone can see their presentations and slides. It moves away from the wall for accessing the connections and abgles left and right really well. It holds their 65" Samsung TV and their maintenance man said it was really easy to install.

La verdad quede demasiado satisfecho con el producto desde la entrega inmediata en pocos días hasta el producto en si,es resistente fácil de colocar y tiene un Manual de guía para que te vayas guiando como debe de ir colocado,también tiene en el Manual tornillos que van con números para que sepas bien donde va cada uno,excelente compra no lo pienses tanto en adquirirla….

Buen y exelente compra se be de buen material y presentable buena calidad y se ve resistente y buen precio gracias.

Me parece un producto de buena calidad