YHTAUTO Front Hood Gas Struts Lift Supports for Volvo | Compatible with S60 2001-2009, S80 1999-2006, V70 1999-2007, XC70 2003-2007 | Bonnet Gas Spring Shocks Struts, Set of 2

Great product. perfect fit for our 2003 Volvo S80. have to use a small flat screwdriver and pry the retaining ring off (dirctly behind the head of the ball/socket, and inline with the shaft; you wedge the screwdriver in and pry back. the ring will lift a bit and then you can pull them off. putting the new ones on were a snap. I put the top (hood) side on first, and then had a tough time lining up and fitting the bottom one. I panicked for a few seconds, till i realized that you have to lift/lower the hood a few degrees, until the bottom one lined up....then it pops right on. very happy with this. Our near 20 year old volvo has a brand new hood function! thanks.

Perfect fit and easy to install. No more holding the hood up with one hand or using a stick to hold the hood up due to worn out hood struts. This item works as a direct replacement to the factory hood struts.

Solid struts. Lifts the hood and keeps in place. Used on 2001 Volvo v70

Easy to install, worked correctly, way cheaper than from the dealer

I used on my volvo car. Easy to use and good durability.

great quality and fit perfectly on my volvo V70r

I bought a set for my 2005 Volvo V70 (uses 2 struts) and they are a perfect size and seem well made except for one thing. One of them has misaligned/rotated caps such that the caps would not fit over the little receiver balls on the car. The receiver caps need to be in the same plane. See pic. I could not figure how to rotate them without loosening the tip and extending the length of cap. If the vendor knows how to adjust this, please reply, otherwise I will return these.Update: thank you to those who answered my question! with lots of brute force and grippy gloves I was able to twist/rotate the caps into alignment, so now it fits. I would suggest these struts come with instructions which include this info.

Perfect fit for the hood on my 2004 S80. Installation only took a couple minutes. It'll be nice to not worry about the hood dropping unexpectedly.

Hasta ahora el producto me ha salido muy bueno a un precio muy bajo, lo recomiendo mucho

Much cheaper than the $110 for the factory gas strut, and works just as well so far. The stock park was no longer capable of holding the hood open in a slight breeze, but this one is strong enough to lift it from about 3/4 up and hold it in wind. The car only required one gas spring, and I was worried that one might not be strong enough as it is sold in a pair, and older models use both, but it has faired well so far. Installation was very easy once I worked out how to pry open the clips with a flathead screwdriver.It does make a strange sound when closing the hood that the original didn't, but the original was busted, so we will see how this pans out. Will have a spare if it dies prematurely I suppose.

Pedí un producto para determinado vehículo y finalmente es mas pequeño